[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 3/4] drm: panel-lvds: Spout an error if of_get_display_timing() gives an error
In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present. Presumably panel-lvds
should take charge of spouting its own error now.

NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one). Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.

Signed-off-by: Douglas Anderson <>

drivers/gpu/drm/panel/panel-lvds.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 1ec57d0806a8..ad47cc95459e 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -147,8 +147,11 @@ static int panel_lvds_parse_dt(struct panel_lvds *lvds)
int ret;

ret = of_get_display_timing(np, "panel-timing", &timing);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(lvds->dev, "%pOF: problems parsing panel-timing (%d)\n",
+ np, ret);
return ret;
+ }

videomode_from_timing(&timing, &lvds->video_mode);

 \ /
  Last update: 2019-07-22 20:25    [W:0.086 / U:21.408 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site