lkml.org 
[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] iio: pressure: hp03: convert to i2c_new_dummy_device
Date
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

drivers/iio/pressure/hp03.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
index f00102577fd5..026ba15ef68f 100644
--- a/drivers/iio/pressure/hp03.c
+++ b/drivers/iio/pressure/hp03.c
@@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client,
* which has it's dedicated I2C address and contains
* the calibration constants for the sensor.
*/
- priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
- if (!priv->eeprom_client) {
+ priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR);
+ if (IS_ERR(priv->eeprom_client)) {
dev_err(dev, "New EEPROM I2C device failed\n");
- return -ENODEV;
+ return PTR_ERR(priv->eeprom_client);
}

priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
--
2.20.1
\
 
 \ /
  Last update: 2019-07-22 19:28    [W:0.047 / U:52.340 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site