Messages in this thread Patch in this message | | | From | Jose Abreu <> | Subject | [PATCH net] net: stmmac: Do not cut down 1G modes | Date | Mon, 22 Jul 2019 16:07:21 +0200 |
| |
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC.
Let's allow this speed by default.
Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com>
--- Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ondrej Jirman <megi@xff.cz> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 207c3755bcc5..b0d5e5346597 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -814,20 +814,15 @@ static void stmmac_validate(struct phylink_config *config, phylink_set(mac_supported, 10baseT_Full); phylink_set(mac_supported, 100baseT_Half); phylink_set(mac_supported, 100baseT_Full); + phylink_set(mac_supported, 1000baseT_Half); + phylink_set(mac_supported, 1000baseT_Full); + phylink_set(mac_supported, 1000baseKX_Full); phylink_set(mac_supported, Autoneg); phylink_set(mac_supported, Pause); phylink_set(mac_supported, Asym_Pause); phylink_set_port_modes(mac_supported); - if (priv->plat->has_gmac || - priv->plat->has_gmac4 || - priv->plat->has_xgmac) { - phylink_set(mac_supported, 1000baseT_Half); - phylink_set(mac_supported, 1000baseT_Full); - phylink_set(mac_supported, 1000baseKX_Full); - } - /* Cut down 1G if asked to */ if ((max_speed > 0) && (max_speed < 1000)) { phylink_set(mask, 1000baseT_Full); -- 2.7.4
| |