lkml.org 
[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 06/10] ASoC: dt-bindings: Document dl_mask property
From
Date
Am Montag, den 22.07.2019, 15:48 +0300 schrieb Daniel Baluta:
> SAI supports up to 8 data lines. This property let the user
> configure how many data lines should be used per transfer
> direction (Tx/Rx).
>
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  Documentation/devicetree/bindings/sound/fsl-sai.txt | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> index 2e726b983845..59f4d965a5fb 100644
> --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> @@ -49,6 +49,11 @@ Optional properties:
>  
> >    - big-endian : Boolean property, required if all the SAI
> >     registers are big-endian rather than little-endian.
> > +  - fsl,dl_mask : list of two integers (bitmask, first for RX, second
> > +   for TX) representing enabled datalines. Bit 0
> > +   represents first data line, bit 1 represents second
> > +   data line and so on. Data line is enabled if
> > +   corresponding bit is set to 1.

No underscores in property names, please. Also this should document the
default value used by the driver when the property is absent.

Regards,
Lucas

\
 
 \ /
  Last update: 2019-07-22 14:57    [W:0.210 / U:41.676 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site