lkml.org 
[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
Date
Some devices like the ADIS16460 IMU require a longer period between
transfers, i.e. between when the CS is de-asserted and re-asserted. The
default value of 10us is not enough. This change makes the delay
configurable for when the next CS change goes active, allowing the default
to remain 10us is case it is unspecified.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/spi/spi.c | 3 ++-
include/linux/spi/spi.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 5e75944ad5d1..fe7fa7fb25c5 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1163,7 +1163,8 @@ static int spi_transfer_one_message(struct spi_controller *ctlr,
keep_cs = true;
} else {
spi_set_cs(msg->spi, false);
- udelay(10);
+ udelay(xfer->cs_change_delay ?
+ xfer->cs_change_delay : 10);
spi_set_cs(msg->spi, true);
}
}
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 053abd22ad31..6de287f8e465 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -734,6 +734,7 @@ extern void spi_res_release(struct spi_controller *ctlr,
* transfer. If 0 the default (from @spi_device) is used.
* @bits_per_word: select a bits_per_word other than the device default
* for this transfer. If 0 the default (from @spi_device) is used.
+ * @cs_change_delay: microseconds to delay between cs_change transfers.
* @cs_change: affects chipselect after this transfer completes
* @delay_usecs: microseconds to delay after this transfer before
* (optionally) changing the chipselect status, then starting
@@ -823,6 +824,7 @@ struct spi_transfer {
#define SPI_NBITS_QUAD 0x04 /* 4bits transfer */
u8 bits_per_word;
u8 word_delay_usecs;
+ u8 cs_change_delay;
u16 delay_usecs;
u32 speed_hz;
u16 word_delay;
--
2.20.1
\
 
 \ /
  Last update: 2019-07-22 14:49    [W:0.054 / U:44.456 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site