[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v8 07/15] memory: tegra20-emc: Increase handshake timeout
Turned out that it could take over a millisecond under some circumstances,
like running on a very low CPU/memory frequency. TRM says that handshake
happens when there is a "safe" moment, but not explains exactly what that
moment is. Apparently at least memory should be idling and thus the low
frequency should be a reasonable cause for a longer handshake delay.

Signed-off-by: Dmitry Osipenko <>
drivers/memory/tegra/tegra20-emc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index 25a6aad6a7a9..da75efc632c7 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -236,7 +236,7 @@ static int emc_complete_timing_change(struct tegra_emc *emc, bool flush)

timeout = wait_for_completion_timeout(&emc->clk_handshake_complete,
- usecs_to_jiffies(100));
+ msecs_to_jiffies(100));
if (timeout == 0) {
dev_err(emc->dev, "EMC-CAR handshake failed\n");
return -EIO;
 \ /
  Last update: 2019-07-23 05:17    [W:0.102 / U:2.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site