lkml.org 
[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v1 2/3] ASoC: rsnd: Allow reconfiguration of clock rate

Hi Jiada, again

> The solution looks very over-kill to me,
> especiallyq [3/3] patch is too much to me.
>
> 1st, can we start clock at .hw_param, instead of .prepare ?
> and stop it at .hw_free ?
>
> 2nd, can we keep usrcnt setup as-is ?
> I guess we can just avoid rsnd_ssi_master_clk_start() if ssi->rate was not 0 ?
> similar for rsnd_ssi_master_clk_stop()

In my quick check, I used your [1/3] patch and below.
It works for me, but I don't know detail of your test case.

----------
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index f6a7466..f26ffd1 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -286,19 +286,8 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
if (rsnd_ssi_is_multi_slave(mod, io))
return 0;

- if (ssi->usrcnt > 0) {
- if (ssi->rate != rate) {
- dev_err(dev, "SSI parent/child should use same rate\n");
- return -EINVAL;
- }
-
- if (ssi->chan != chan) {
- dev_err(dev, "SSI parent/child should use same chan\n");
- return -EINVAL;
- }
-
+ if (ssi->rate)
return 0;
- }

if (rsnd_runtime_is_tdm_split(io))
chan = rsnd_io_converted_chan(io);
@@ -349,7 +338,7 @@ static void rsnd_ssi_master_clk_stop(struct rsnd_mod *mod,
if (!rsnd_ssi_can_output_clk(mod))
return;

- if (ssi->usrcnt > 1)
+ if (!ssi->rate)
return;

ssi->cr_clk = 0;
@@ -539,6 +528,17 @@ static int rsnd_ssi_hw_params(struct rsnd_mod *mod,
return 0;
}

+static int rsnd_ssi_hw_free(struct rsnd_mod *mod, struct rsnd_dai_stream *io,
+ struct snd_pcm_substream *substream)
+{
+ if (!rsnd_ssi_is_run_mods(mod, io))
+ return 0;
+
+ rsnd_ssi_master_clk_stop(mod, io);
+
+ return 0;
+}
+
static int rsnd_ssi_start(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
@@ -925,6 +925,7 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.pointer = rsnd_ssi_pio_pointer,
.pcm_new = rsnd_ssi_pcm_new,
.hw_params = rsnd_ssi_hw_params,
+ .hw_free = rsnd_ssi_hw_free,
.prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
@@ -1012,6 +1013,7 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = {
.pcm_new = rsnd_ssi_pcm_new,
.fallback = rsnd_ssi_fallback,
.hw_params = rsnd_ssi_hw_params,
+ .hw_free = rsnd_ssi_hw_free,
.prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
----------
\
 
 \ /
  Last update: 2019-07-23 03:41    [W:0.337 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site