lkml.org 
[lkml]   [2019]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6 12/21] cpufreq: tegra124: Add suspend and resume support
From
Date
21.07.2019 22:40, Sowjanya Komatineni пишет:
> This patch adds suspend and resume pm ops for cpufreq driver.
>
> PLLP is the safe clock source for CPU during system suspend and
> resume as PLLP rate is below the CPU Fmax at Vmin.
>
> CPUFreq driver suspend switches the CPU clock source to PLLP and
> disables the DFLL clock.
>
> During system resume, warmboot code powers up the CPU with PLLP
> clock source. So CPUFreq driver resume enabled DFLL clock and
> switches CPU back to DFLL clock source.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> drivers/cpufreq/tegra124-cpufreq.c | 46 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
> index 4f0c637b3b49..4eff63379b0f 100644
> --- a/drivers/cpufreq/tegra124-cpufreq.c
> +++ b/drivers/cpufreq/tegra124-cpufreq.c
> @@ -6,6 +6,7 @@
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> #include <linux/clk.h>
> +#include <linux/cpufreq.h>> #include <linux/err.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> @@ -128,8 +129,53 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
> return ret;
> }
>
> +static int tegra124_cpufreq_suspend(struct device *dev)

__maybe_unused

> +{
> + struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev);
> +
> + /*
> + * PLLP rate 408Mhz is below the CPU Fmax at Vmin and is safe to
> + * use during suspend and resume. So, switch the CPU clock source
> + * to PLLP and disable DFLL.
> + */
> + clk_set_parent(priv->cpu_clk, priv->pllp_clk);

Error check?

> +
> + /* disable DFLL clock */
> + clk_disable_unprepare(priv->dfll_clk);
> +
> + return 0;
> +}
> +
> +static int tegra124_cpufreq_resume(struct device *dev)

__maybe_unused

> +{
> + struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + /*
> + * Warmboot code powers up the CPU with PLLP clock source.
> + * Enable DFLL clock and switch CPU clock source back to DFLL.
> + */
> + ret = clk_prepare_enable(priv->dfll_clk);
> + if (ret) {
> + dev_warn(dev, "failed to enable DFLL clock for CPU\n");

dev_err("..: %d\n", err);

> + clk_set_parent(priv->cpu_clk, priv->pllp_clk);

This is not needed because CPU is already on PLLP.

> + disable_cpufreq();
> + return ret;
> + }
> +
> + clk_set_parent(priv->cpu_clk, priv->dfll_clk);

Error check?

> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops tegra124_cpufreq_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend,
> + tegra124_cpufreq_resume)
> +};
> +
> static struct platform_driver tegra124_cpufreq_platdrv = {
> .driver.name = "cpufreq-tegra124",
> + .driver.pm = &tegra124_cpufreq_pm_ops,
> .probe = tegra124_cpufreq_probe,
> };
>
>

\
 
 \ /
  Last update: 2019-07-21 23:07    [W:0.221 / U:40.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site