lkml.org 
[lkml]   [2019]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] rtl8xxxu: Fix wifi low signal strength issue of RTL8723BU
Date
On 7/1/19 4:27 AM, Daniel Drake wrote:
> Hi Chris,
>
> On Thu, Jun 27, 2019 at 5:53 PM Chris Chiu <chiu@endlessm.com> wrote:
>> The WiFi tx power of RTL8723BU is extremely low after booting. So
>> the WiFi scan gives very limited AP list and it always fails to
>> connect to the selected AP. This module only supports 1x1 antenna
>> and the antenna is switched to bluetooth due to some incorrect
>> register settings.
>>
>> This commit hand over the antenna control to PTA, the wifi signal
>> will be back to normal and the bluetooth scan can also work at the
>> same time. However, the btcoexist still needs to be handled under
>> different circumstances. If there's a BT connection established,
>> the wifi still fails to connect until disconneting the BT.
>>
>> Signed-off-by: Chris Chiu <chiu@endlessm.com>
>
> Really nice work finding this!
>
> I know that after this change, you plan to bring over the btcoexist
> code from the vendor driver (or at least the minimum required code)
> for a more complete fix, but I'm curious how you found these magic
> register values and how they compare to the values used by the vendor
> driver with btcoexist?

We definitely don't want to bring over the vendor code, since it's a
pile of spaghetti, but we probably need to get something sorted. This
went down the drain when the bluetooth driver was added without taking
it into account - long after this driver was merged.

Cheers,
Jes

\
 
 \ /
  Last update: 2019-07-02 14:43    [W:0.125 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site