lkml.org 
[lkml]   [2019]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v3] dmaengine: tegra-apb: Support per-burst residue granularity
From
Date
02.07.2019 14:56, Dmitry Osipenko пишет:
> 02.07.2019 14:37, Dmitry Osipenko пишет:
>> 02.07.2019 14:20, Jon Hunter пишет:
>>>
>>> On 27/06/2019 20:47, Dmitry Osipenko wrote:
>>>> Tegra's APB DMA engine updates words counter after each transferred burst
>>>> of data, hence it can report transfer's residual with more fidelity which
>>>> may be required in cases like audio playback. In particular this fixes
>>>> audio stuttering during playback in a chromium web browser. The patch is
>>>> based on the original work that was made by Ben Dooks and a patch from
>>>> downstream kernel. It was tested on Tegra20 and Tegra30 devices.
>>>>
>>>> Link: https://lore.kernel.org/lkml/20190424162348.23692-1-ben.dooks@codethink.co.uk/
>>>> Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=commit;h=c7bba40c6846fbf3eaad35c4472dcc7d8bbc02e5
>>>> Inspired-by: Ben Dooks <ben.dooks@codethink.co.uk>
>>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>>> ---
>>>>
>>>> Changelog:
>>>>
>>>> v3: Added workaround for a hardware design shortcoming that results
>>>> in a words counter wraparound before end-of-transfer bit is set
>>>> in a cyclic mode.
>>>>
>>>> v2: Addressed review comments made by Jon Hunter to v1. We won't try
>>>> to get words count if dma_desc is on free list as it will result
>>>> in a NULL dereference because this case wasn't handled properly.
>>>>
>>>> The residual value is now updated properly, avoiding potential
>>>> integer overflow by adding the "bytes" to the "bytes_transferred"
>>>> instead of the subtraction.
>>>>
>>>> drivers/dma/tegra20-apb-dma.c | 69 +++++++++++++++++++++++++++++++----
>>>> 1 file changed, 62 insertions(+), 7 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
>>>> index 79e9593815f1..71473eda28ee 100644
>>>> --- a/drivers/dma/tegra20-apb-dma.c
>>>> +++ b/drivers/dma/tegra20-apb-dma.c
>>>> @@ -152,6 +152,7 @@ struct tegra_dma_sg_req {
>>>> bool last_sg;
>>>> struct list_head node;
>>>> struct tegra_dma_desc *dma_desc;
>>>> + unsigned int words_xferred;
>>>> };
>>>>
>>>> /*
>>>> @@ -496,6 +497,7 @@ static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
>>>> tdc_write(tdc, TEGRA_APBDMA_CHAN_CSR,
>>>> nsg_req->ch_regs.csr | TEGRA_APBDMA_CSR_ENB);
>>>> nsg_req->configured = true;
>>>> + nsg_req->words_xferred = 0;
>>>>
>>>> tegra_dma_resume(tdc);
>>>> }
>>>> @@ -511,6 +513,7 @@ static void tdc_start_head_req(struct tegra_dma_channel *tdc)
>>>> typeof(*sg_req), node);
>>>> tegra_dma_start(tdc, sg_req);
>>>> sg_req->configured = true;
>>>> + sg_req->words_xferred = 0;
>>>> tdc->busy = true;
>>>> }
>>>>
>>>> @@ -797,6 +800,61 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
>>>> return 0;
>>>> }
>>>>
>>>> +static unsigned int tegra_dma_sg_bytes_xferred(struct tegra_dma_channel *tdc,
>>>> + struct tegra_dma_sg_req *sg_req)
>>>> +{
>>>> + unsigned long status, wcount = 0;
>>>> +
>>>> + if (!list_is_first(&sg_req->node, &tdc->pending_sg_req))
>>>> + return 0;
>>>> +
>>>> + if (tdc->tdma->chip_data->support_separate_wcount_reg)
>>>> + wcount = tdc_read(tdc, TEGRA_APBDMA_CHAN_WORD_TRANSFER);
>>>> +
>>>> + status = tdc_read(tdc, TEGRA_APBDMA_CHAN_STATUS);
>>>> +
>>>> + if (!tdc->tdma->chip_data->support_separate_wcount_reg)
>>>> + wcount = status;
>>>> +
>>>> + if (status & TEGRA_APBDMA_STATUS_ISE_EOC)
>>>> + return sg_req->req_len;
>>>> +
>>>> + wcount = get_current_xferred_count(tdc, sg_req, wcount);
>>>> +
>>>> + if (!wcount) {
>>>> + /*
>>>> + * If wcount wasn't ever polled for this SG before, then
>>>> + * simply assume that transfer hasn't started yet.
>>>> + *
>>>> + * Otherwise it's the end of the transfer.
>>>> + *
>>>> + * The alternative would be to poll the status register
>>>> + * until EOC bit is set or wcount goes UP. That's so
>>>> + * because EOC bit is getting set only after the last
>>>> + * burst's completion and counter is less than the actual
>>>> + * transfer size by 4 bytes. The counter value wraps around
>>>> + * in a cyclic mode before EOC is set(!), so we can't easily
>>>> + * distinguish start of transfer from its end.
>>>> + */
>>>> + if (sg_req->words_xferred)
>>>> + wcount = sg_req->req_len - 4;
>>>> +
>>>> + } else if (wcount < sg_req->words_xferred) {
>>>> + /*
>>>> + * This case shall not ever happen because EOC bit
>>>> + * must be set once next cyclic transfer is started.
>>>
>>> I am not sure I follow this and why this condition cannot happen for
>>> cyclic transfers. What about non-cyclic transfers?
>>
>> It cannot happen because the EOC bit will be set in that case. The counter wraps
>> around when the transfer of a last burst happens, EOC bit is guaranteed to be set
>> after completion of the last burst. That's my observation after a thorough testing,
>> it will be very odd if EOC setting happened completely asynchronously.
>>
>> For a non-cyclic transfers it doesn't matter.. because they are not cyclic and thus
>> counter will be stopped by itself. It will be a disaster if all of sudden a
>> non-cyclic transfer becomes cyclic, don't you think so? :)
>>
>
> Ah, probably I was too focused on audio playback use-case. If it's a free-running
> transfer, then that case of a wraparound seems should be legit.. hmm.
>

Looks like that will work:

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 71473eda28ee..201c693b11f5 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -648,6 +648,8 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
st = handle_continuous_head_request(tdc, sgreq, to_terminate);
if (!st)
dma_desc->dma_status = DMA_ERROR;
+ } else {
+ sg_req->words_xferred = 0;
}
}
\
 
 \ /
  Last update: 2019-07-02 14:04    [W:0.276 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site