lkml.org 
[lkml]   [2019]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] Add support for i.MXQXP AI_ML board
Date
Hello,

This patchset adds support for i.MXQXP AI_ML board from Einfochips.
This board is one of the Consumer Edition boards of the 96Boards family
based on i.MX8QXP SoC from NXP/Freescale.

The initial support includes following peripherals which are tested and
known to be working:

1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools

Thanks,
Mani

Changes in v2:

* Incorporated review comments from Dong (small cleanups)

Manivannan Sadhasivam (3):
dt-bindings: Add Vendor prefix for Einfochips
dt-bindings: arm: Document i.MX8QXP AI_ML board binding
arm64: dts: freescale: Add support for i.MX8QXP AI_ML board

.../devicetree/bindings/arm/fsl.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8qxp-ai_ml.dts | 249 ++++++++++++++++++
4 files changed, 253 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts

--
2.17.1

\
 
 \ /
  Last update: 2019-07-19 09:10    [W:0.847 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site