lkml.org 
[lkml]   [2019]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 2/6] ASoC: sgtl5000: Improve VAG power and mute control
Date
On Thu, Jul 18, 2019 at 12:03 PM Oleksandr Suvorov
<oleksandr.suvorov@toradex.com> wrote:
>
> VAG power control is improved to fit the manual [1]. This patch fixes as
> minimum one bug: if customer muxes Headphone to Line-In right after boot,
> the VAG power remains off that leads to poor sound quality from line-in.
>
> I.e. after boot:
> - Connect sound source to Line-In jack;
> - Connect headphone to HP jack;
> - Run following commands:
> $ amixer set 'Headphone' 80%
> $ amixer set 'Headphone Mux' LINE_IN
>
> Change VAG power on/off control according to the following algorithm:
> - turn VAG power ON on the 1st incoming event.
> - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
> - turn VAG power OFF when there is the latest consumer's pre-down event
> come.
> - always delay after VAG power OFF to avoid pop.
> - delay after VAG power ON if the initiative consumer is Line-In, this
> prevents pop during line-in muxing.
>
> According to the data sheet [1], to avoid any pops/clicks,
> the outputs should be muted during input/output
> routing changes.
>
> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>
> Cc: stable@vger.kernel.org
> Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
>
> ---
>
> Changes in v5:
> - Improve commit message
> - Add explicit stable tag
>
> Changes in v4:
> - Code optimization, simplify function signature
> (thanks to Cezary Rojewski <cezary.rojewski@intel.com> for an idea)
> - CC the patch to kernel-stable
> - Add a Fixes tag
>
> Changes in v3:
> - Add the reference to NXP SGTL5000 data sheet to commit message
>
> Changes in v2:
> - Fix patch formatting
>
> sound/soc/codecs/sgtl5000.c | 216 ++++++++++++++++++++++++++++++------
> 1 file changed, 185 insertions(+), 31 deletions(-)
>
> diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> index a6a4748c97f9d..a2aeb5fb9b537 100644
> --- a/sound/soc/codecs/sgtl5000.c
> +++ b/sound/soc/codecs/sgtl5000.c
> @@ -31,6 +31,13 @@
> #define SGTL5000_DAP_REG_OFFSET 0x0100
> #define SGTL5000_MAX_REG_OFFSET 0x013A
>
> +/* Delay for the VAG ramp up */
> +#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
> +/* Delay for the VAG ramp down */
> +#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
> +
> +#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
> +
> /* default value of sgtl5000 registers */
> static const struct reg_default sgtl5000_reg_defaults[] = {
> { SGTL5000_CHIP_DIG_POWER, 0x0000 },
> @@ -123,6 +130,19 @@ enum {
> I2S_SCLK_STRENGTH_HIGH,
> };
>
> +enum {
> + HP_POWER_EVENT,
> + DAC_POWER_EVENT,
> + ADC_POWER_EVENT,
> + LAST_POWER_EVENT
> +};
> +
> +static u16 mute_mask[] = {
> + SGTL5000_HP_MUTE,
> + SGTL5000_OUTPUTS_MUTE,
> + SGTL5000_OUTPUTS_MUTE
> +};
> +
> /* sgtl5000 private structure in codec */
> struct sgtl5000_priv {
> int sysclk; /* sysclk rate */
> @@ -137,8 +157,109 @@ struct sgtl5000_priv {
> u8 micbias_voltage;
> u8 lrclk_strength;
> u8 sclk_strength;
> + u16 mute_state[LAST_POWER_EVENT];
> };
>
> +static inline int hp_sel_input(struct snd_soc_component *component)
> +{
> + return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
> + SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
> +}
> +
> +static inline u16 mute_output(struct snd_soc_component *component,
> + u16 mute_mask)
> +{
> + u16 mute_reg = snd_soc_component_read32(component,
> + SGTL5000_CHIP_ANA_CTRL);
> +
> + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
> + mute_mask, mute_mask);
> + return mute_reg;
> +}
> +
> +static inline void restore_output(struct snd_soc_component *component,
> + u16 mute_mask, u16 mute_reg)
> +{
> + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
> + mute_mask, mute_reg);
> +}
> +
> +static void vag_power_on(struct snd_soc_component *component, u32 source)
> +{
> + if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
> + SGTL5000_VAG_POWERUP)
> + return;
> +
> + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> + SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> +
> + /* When VAG powering on to get local loop from Line-In, the sleep
> + * is required to avoid loud pop.
> + */
> + if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
> + source == HP_POWER_EVENT)
> + msleep(SGTL5000_VAG_POWERUP_DELAY);
> +}
> +
> +static int vag_power_consumers(struct snd_soc_component *component,
> + u16 ana_pwr_reg, u32 source)
> +{
> + int consumers = 0;
> +
> + /* count dac/adc consumers unconditional */
> + if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
> + consumers++;
> + if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
> + consumers++;
> +
> + /*
> + * If the event comes from HP and Line-In is selected,
> + * current action is 'DAC to be powered down'.
> + * As HP_POWERUP is not set when HP muxed to line-in,
> + * we need to keep VAG power ON.
> + */
> + if (source == HP_POWER_EVENT) {
> + if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
> + consumers++;
> + } else {
> + if (ana_pwr_reg & SGTL5000_HP_POWERUP)
> + consumers++;
> + }
> +
> + return consumers;
> +}
> +
> +static void vag_power_off(struct snd_soc_component *component, u32 source)
> +{
> + u16 ana_pwr = snd_soc_component_read32(component,
> + SGTL5000_CHIP_ANA_POWER);
> +
> + if (!(ana_pwr & SGTL5000_VAG_POWERUP))
> + return;
> +
> + /*
> + * This function calls when any of VAG power consumers is disappearing.
> + * Thus, if there is more than one consumer at the moment, as minimum
> + * one consumer will definitely stay after the end of the current
> + * event.
> + * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
> + * - LINE_IN (for HP events) / HP (for DAC/ADC events)
> + * - DAC
> + * - ADC
> + * (the current consumer is disappearing right now)
> + */
> + if (vag_power_consumers(component, ana_pwr, source) >= 2)
> + return;
> +
> + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> + SGTL5000_VAG_POWERUP, 0);
> + /* In power down case, we need wait 400-1000 ms
> + * when VAG fully ramped down.
> + * As longer we wait, as smaller pop we've got.
> + */
> + msleep(SGTL5000_VAG_POWERDOWN_DELAY);
> +}
> +
> /*
> * mic_bias power on/off share the same register bits with
> * output impedance of mic bias, when power on mic bias, we
> @@ -170,36 +291,30 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
> return 0;
> }
>
> -/*
> - * As manual described, ADC/DAC only works when VAG powerup,
> - * So enabled VAG before ADC/DAC up.
> - * In power down case, we need wait 400ms when vag fully ramped down.
> - */
> -static int power_vag_event(struct snd_soc_dapm_widget *w,
> - struct snd_kcontrol *kcontrol, int event)
> +static int vag_and_mute_control(struct snd_soc_component *component,
> + int event, int event_source)
> {
> - struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> - const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
> + struct sgtl5000_priv *sgtl5000 =
> + snd_soc_component_get_drvdata(component);
>
> switch (event) {
> - case SND_SOC_DAPM_POST_PMU:
> - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> - SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> - msleep(400);
> + case SND_SOC_DAPM_PRE_PMU:
> + sgtl5000->mute_state[event_source] =
> + mute_output(component, mute_mask[event_source]);
> + break;
> + case SND_SOC_DAPM_POST_PMU:
> + vag_power_on(component, event_source);
> + restore_output(component, mute_mask[event_source],
> + sgtl5000->mute_state[event_source]);
> break;
> -
> case SND_SOC_DAPM_PRE_PMD:
> - /*
> - * Don't clear VAG_POWERUP, when both DAC and ADC are
> - * operational to prevent inadvertently starving the
> - * other one of them.
> - */
> - if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
> - mask) != mask) {
> - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> - SGTL5000_VAG_POWERUP, 0);
> - msleep(400);
> - }
> + sgtl5000->mute_state[event_source] =
> + mute_output(component, mute_mask[event_source]);
> + vag_power_off(component, event_source);
> + break;
> + case SND_SOC_DAPM_POST_PMD:
> + restore_output(component, mute_mask[event_source],
> + sgtl5000->mute_state[event_source]);
> break;
> default:
> break;
> @@ -208,6 +323,41 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
> return 0;
> }
>
> +/*
> + * Mute Headphone when power it up/down.
> + * Control VAG power on HP power path.
> + */
> +static int headphone_pga_event(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> +
> + return vag_and_mute_control(component, event, HP_POWER_EVENT);
> +}
> +
> +/* As manual describes, ADC/DAC powering up/down requires
> + * to mute outputs to avoid pops.
> + * Control VAG power on ADC/DAC power path.
> + */
> +static int adc_updown_depop(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> +
> + return vag_and_mute_control(component, event, ADC_POWER_EVENT);
> +}
> +
> +static int dac_updown_depop(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> +
> + return vag_and_mute_control(component, event, DAC_POWER_EVENT);
> +}
> +
> /* input sources for ADC */
> static const char *adc_mux_text[] = {
> "MIC_IN", "LINE_IN"
> @@ -280,7 +430,10 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
> mic_bias_event,
> SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
>
> - SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
> + SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
> + headphone_pga_event,
> + SND_SOC_DAPM_PRE_POST_PMU |
> + SND_SOC_DAPM_PRE_POST_PMD),
> SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
>
> SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
> @@ -301,11 +454,12 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
> 0, SGTL5000_CHIP_DIG_POWER,
> 1, 0),
>
> - SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
> - SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
> -
> - SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
> - SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
> + SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
> + adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
> + SND_SOC_DAPM_PRE_POST_PMD),
> + SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
> + dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
> + SND_SOC_DAPM_PRE_POST_PMD),
> };
>
> /* routes for sgtl5000 */
> --
> 2.20.1
>

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

--
Best regards - Freundliche Grüsse - Meilleures salutations

Senior Development Engineer,
Igor Opaniuk

Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 48
00 (main line)
\
 
 \ /
  Last update: 2019-07-18 18:26    [W:0.105 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site