Messages in this thread | | | From | Andra Danciu <> | Subject | [PATCH v3 0/2] Add basic support for pico-pi-imx8m | Date | Thu, 18 Jul 2019 15:16:26 +0300 |
| |
Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
Changes since v2: - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to technexion,pico-pi-imx8m - removed bootargs property - removed regulators node and put fixed regulator directly under root node - changed node name from usb_otg_vbus to regulator-usb-otg-vbus - removed pinctrl-names property from iomuxc node - removed wand-pi-8m container node - sorted pinctrl nodes alphabetically - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream driver - changed properties' order in usb_dwc3_1 node
Changes since v1: - renamed wandboard-pi-8m.dts to pico-pi-8m.dts - removed pinctrl_csi1, pinctrl_wifi_ctrl - used generic name for pmic - removed gpo node - delete regulator-virtuals node - remove always-on property from buck1-8 and ldo3-7 - remove pmic-buck-uses-i2c-dvs property for buck1-4
Andra Danciu (1): dt-bindings: arm: fsl: Add the pico-pi-imx8m board
Richard Hu (1): arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M
Documentation/devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/pico-pi-8m.dts | 417 +++++++++++++++++++++++++ 3 files changed, 419 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/pico-pi-8m.dts
-- 2.11.0
| |