lkml.org 
[lkml]   [2019]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 1/2] dt-bindings: mailbox: add binding doc for the ARM SMC/HVC mailbox
Date
Hi Rob,

> Subject: Re: [PATCH v3 1/2] dt-bindings: mailbox: add binding doc for the ARM
> SMC/HVC mailbox
>
> On Mon, Jul 15, 2019 at 4:10 AM Peng Fan <peng.fan@nxp.com> wrote:
> >
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > The ARM SMC/HVC mailbox binding describes a firmware interface to
> > trigger actions in software layers running in the EL2 or EL3 exception levels.
> > The term "ARM" here relates to the SMC instruction as part of the ARM
> > instruction set, not as a standard endorsed by ARM Ltd.
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > V3:
> > Convert to yaml
> > Drop interrupt
> > Introudce transports to indicate mem/reg The func id is still kept
> > as optional, because like SCMI it only cares about message.
> >
> > V2:
> > Introduce interrupts as a property.
> >
> > .../devicetree/bindings/mailbox/arm-smc.yaml | 124
> +++++++++++++++++++++
> > 1 file changed, 124 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mailbox/arm-smc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mailbox/arm-smc.yaml
> > b/Documentation/devicetree/bindings/mailbox/arm-smc.yaml
> > new file mode 100644
> > index 000000000000..da9b1a03bc4e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mailbox/arm-smc.yaml
> > @@ -0,0 +1,124 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fmailbox%2Farm-smc.yaml%23&amp;data=02%7
> C01%7Cp
> >
> +eng.fan%40nxp.com%7C424e0d1c19c344406b6008d709465591%7C686ea1
> d3bc2b4c
> >
> +6fa92cd99c5c301635%7C0%7C0%7C636988070002772705&amp;sdata=DV
> stQ%2FhuN
> > +c67%2Bt08yXibQrX7sIeocHziYp3dkkeRoJ4%3D&amp;reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=02%7C01%7Cpe
> ng.fan%
> >
> +40nxp.com%7C424e0d1c19c344406b6008d709465591%7C686ea1d3bc2b4
> c6fa92cd9
> >
> +9c5c301635%7C0%7C0%7C636988070002782698&amp;sdata=D%2Fa2SU
> W%2FCqclJdy
> > +RbFggqqL%2BAEumER0K3rAaisY2bMc%3D&amp;reserved=0
> > +
> > +title: ARM SMC Mailbox Interface
> > +
> > +maintainers:
> > + - Peng Fan <peng.fan@nxp.com>
> > +
> > +description: |
> > + This mailbox uses the ARM smc (secure monitor call) and hvc
> > +(hypervisor
> > + call) instruction to trigger a mailbox-connected activity in
> > +firmware,
> > + executing on the very same core as the caller. By nature this
> > +operation
> > + is synchronous and this mailbox provides no way for asynchronous
> > +messages
> > + to be delivered the other way round, from firmware to the OS, but
> > + asynchronous notification could also be supported. However the
> > +value of
> > + r0/w0/x0 the firmware returns after the smc call is delivered as a
> > +received
> > + message to the mailbox framework, so a synchronous communication
> > +can be
> > + established, for a asynchronous notification, no value will be returned.
> > + The exact meaning of both the action the mailbox triggers as well
> > +as the
> > + return value is defined by their users and is not subject to this binding.
> > +
> > + One use case of this mailbox is the SCMI interface, which uses
> > + shared memory to transfer commands and parameters, and a mailbox
> to
> > + trigger a function call. This allows SoCs without a separate
> > + management processor (or when such a processor is not available or
> > + used) to use this standardized interface anyway.
> > +
> > + This binding describes no hardware, but establishes a firmware
> interface.
> > + Upon receiving an SMC using one of the described SMC function
> > + identifiers, the firmware is expected to trigger some mailbox connected
> functionality.
> > + The communication follows the ARM SMC calling convention.
> > + Firmware expects an SMC function identifier in r0 or w0. The
> > + supported identifiers are passed from consumers, or listed in the
> > + the arm,func-ids properties as described below. The firmware can
> > + return one value in the first SMC result register, it is expected
> > + to be an error value, which shall be propagated to the mailbox client.
> > +
> > + Any core which supports the SMC or HVC instruction can be used, as
> > + long as a firmware component running in EL3 or EL2 is handling these
> calls.
> > +
> > +properties:
> > + compatible:
> > + const: arm,smc-mbox
> > +
> > + "#mbox-cells":
> > + const: 1
> > +
> > + arm,num-chans:
> > + description: The number of channels supported.
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Constraints? 0 is valid? 2^32?

0 is not valid. There should be limited channels, but depends on firmware design.

>
> > +
> > + method:
> > + items:
> > + - enum:
> > + - smc
> > + - hvc
> > +
> > + transports:
> > + items:
> > + - enum:
> > + - mem
> > + - reg
>
> What if someone wants to configure this per channel? Perhaps #mbox-cells
> should be 2 and this can be a client parameter.

I need to check. Currently I only use one type. There might be people
want to use different transports for each channels.

>
> Minimally, this needs a 'arm' vendor prefix if it stays.

"arm,transports" in v4.

>
> > +
> > + arm,func-ids:
> > + description: |
> > + An array of 32-bit values specifying the function IDs used by each
> > + mailbox channel. Those function IDs follow the ARM SMC calling
> > + convention standard [1].
>
> What's the default if not specified? Or this should be required?

If not specified, it means the client firmware driver will pass it to mailbox driver.

Thanks,
Peng.

>
> > +
> > + There is one identifier per channel and the number of supported
> > + channels is determined by the length of this array.
> > + minItems: 0
> > + maxItems: 4096 # Should be enough?
> > +
> > +required:
> > + - compatible
> > + - "#mbox-cells"
> > + - arm,num-chans
> > + - transports
> > + - method
> > +
> > +examples:
> > + - |
> > + sram@910000 {
> > + compatible = "mmio-sram";
> > + reg = <0x0 0x93f000 0x0 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x0 0x93f000 0x1000>;
> > +
> > + cpu_scp_lpri: scp-shmem@0 {
> > + compatible = "arm,scmi-shmem";
> > + reg = <0x0 0x200>;
> > + };
> > +
> > + cpu_scp_hpri: scp-shmem@200 {
> > + compatible = "arm,scmi-shmem";
> > + reg = <0x200 0x200>;
> > + };
> > + };
> > +
> > + firmware {
> > + smc_mbox: mailbox {
> > + #mbox-cells = <1>;
> > + compatible = "arm,smc-mbox";
> > + method = "smc";
> > + arm,num-chans = <0x2>;
> > + transports = "mem";
> > + /* Optional */
> > + arm,func-ids = <0xc20000fe>, <0xc20000ff>;
> > + };
> > +
> > + scmi {
> > + compatible = "arm,scmi";
> > + mboxes = <&mailbox 0 &mailbox 1>;
> > + mbox-names = "tx", "rx";
> > + shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
> > + };
> > + };
> > +
> > +...
> > --
> > 2.16.4
> >
\
 
 \ /
  Last update: 2019-07-18 03:44    [W:0.073 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site