lkml.org 
[lkml]   [2019]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/6] ASoC: sgtl5000: Improve VAG power and mute control
On Wed, Jul 17, 2019 at 01:48:43PM -0300, Fabio Estevam wrote:
>On Wed, Jul 17, 2019 at 1:30 PM Oleksandr Suvorov
><oleksandr.suvorov@toradex.com> wrote:
>>
>> Change VAG power on/off control according to the following algorithm:
>> - turn VAG power ON on the 1st incoming event.
>> - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
>> - turn VAG power OFF when there is the latest consumer's pre-down event
>> come.
>> - always delay after VAG power OFF to avoid pop.
>> - delay after VAG power ON if the initiative consumer is Line-In, this
>> prevents pop during line-in muxing.
>>
>> Also, according to the data sheet [1], to avoid any pops/clicks,
>> the outputs should be muted during input/output
>> routing changes.
>>
>> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>>
>> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
>> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>> Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
>
>Reviewed-by: Fabio Estevam <festevam@gmail.com>
>
>By the way, I prefer the description you put in the cover letter as it
>explicitly talks about a bug being fixed.

Yes. This patch describes itself as an improvement rather than a fix.

You need to add an explicit stable tag, rather than just cc us.
Something like:

Cc: stable@kernel.org

--
Thanks,
Sasha

\
 
 \ /
  Last update: 2019-07-18 01:32    [W:0.042 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site