lkml.org 
[lkml]   [2019]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 02/24] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped
From
Date
On 19. 7. 16. 오후 10:03, Dmitry Osipenko wrote:
> 16.07.2019 14:47, Chanwoo Choi пишет:
>> On 19. 7. 8. 오전 7:32, Dmitry Osipenko wrote:
>>> There is no real need to keep interrupt always-enabled, will be nicer
>>> to keep it disabled while governor is inactive.
>>>
>>> Suggested-by: Thierry Reding <thierry.reding@gmail.com>
>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>> ---
>>> drivers/devfreq/tegra30-devfreq.c | 43 ++++++++++++++++---------------
>>> 1 file changed, 22 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
>>> index a27300f40b0b..5e2b133babdd 100644
>>> --- a/drivers/devfreq/tegra30-devfreq.c
>>> +++ b/drivers/devfreq/tegra30-devfreq.c
>>> @@ -11,6 +11,7 @@
>>> #include <linux/devfreq.h>
>>> #include <linux/interrupt.h>
>>> #include <linux/io.h>
>>> +#include <linux/irq.h>
>>> #include <linux/module.h>
>>> #include <linux/mod_devicetable.h>
>>> #include <linux/platform_device.h>
>>> @@ -416,8 +417,6 @@ static void tegra_actmon_start(struct tegra_devfreq *tegra)
>>> {
>>> unsigned int i;
>>>
>>> - disable_irq(tegra->irq);
>>> -
>>> actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
>>> ACTMON_GLB_PERIOD_CTRL);
>>>
>>> @@ -442,8 +441,6 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra)
>>> }
>>>
>>> actmon_write_barrier(tegra);
>>> -
>>> - enable_irq(tegra->irq);
>>> }
>>>
>>> static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
>>> @@ -552,6 +549,12 @@ static int tegra_governor_event_handler(struct devfreq *devfreq,
>>> {
>>> struct tegra_devfreq *tegra = dev_get_drvdata(devfreq->dev.parent);
>>>
>>> + /*
>>> + * Couple device with the governor early as it is needed at
>>> + * the moment of governor's start (used by ISR).
>>> + */
>>> + tegra->devfreq = devfreq;
>>
>> I'm not sure it is necessary. Almost devfreq device get
>> the devfreq instance on probe timing through devfreq_add_device directly.
>
> This is necessary because this assignment is for the "governor" and not
> the "device". Governor is started during of devfreq_add_device(), hence
> there is no better way to assign device to the driver's governor.

OK. I understand.

But, I have a question. Is it working before this patch?
How can you test it on that tegra->devfreq is NULL?

>
>>> +
>>> switch (event) {
>>> case DEVFREQ_GOV_START:
>>> devfreq_monitor_start(devfreq);
>>> @@ -586,10 +589,11 @@ static struct devfreq_governor tegra_devfreq_governor = {
>>>
>>> static int tegra_devfreq_probe(struct platform_device *pdev)
>>> {
>>> - struct tegra_devfreq *tegra;
>>> struct tegra_devfreq_device *dev;
>>> - unsigned int i;
>>> + struct tegra_devfreq *tegra;
>>> + struct devfreq *devfreq;
>>> unsigned long rate;
>>> + unsigned int i;
>>> int err;
>>>
>>> tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
>>> @@ -625,6 +629,16 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>> }
>>> tegra->irq = err;
>>>
>>> + irq_set_status_flags(tegra->irq, IRQ_NOAUTOEN);
>>> +
>>> + err = devm_request_threaded_irq(&pdev->dev, tegra->irq, NULL,
>>> + actmon_thread_isr, IRQF_ONESHOT,
>>> + "tegra-devfreq", tegra);
>>> + if (err) {
>>> + dev_err(&pdev->dev, "Interrupt request failed: %d\n", err);
>>> + return err;
>>> + }
>>> +
>>> reset_control_assert(tegra->reset);
>>>
>>> err = clk_prepare_enable(tegra->clock);
>>> @@ -672,28 +686,15 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>> }
>>>
>>> tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
>>> - tegra->devfreq = devfreq_add_device(&pdev->dev,
>>> - &tegra_devfreq_profile,
>>> - "tegra_actmon",
>>> - NULL);
>>> + devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
>>> + "tegra_actmon", NULL);
>>> if (IS_ERR(tegra->devfreq)) {
>>
>> Have to check 'devfreq' instead of 'tegra->devfreq'.
>> Did you test it? It might be failed because 'tegra->devfreq is NULL.
>
> That's a good catch! Thank you very much.
>
>>> err = PTR_ERR(tegra->devfreq);
>>
>> ditto.
>
> Ok
>
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2019-07-17 08:35    [W:0.109 / U:3.736 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site