lkml.org 
[lkml]   [2019]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/6] OPP: Add support for bandwidth OPP tables
On Tue, Jul 16, 2019 at 10:33 AM Sibi Sankar <sibis@codeaurora.org> wrote:
>
> Hey Saravana,
>
> On 7/3/19 6:40 AM, Saravana Kannan wrote:
> > Not all devices quantify their performance points in terms of frequency.
> > Devices like interconnects quantify their performance points in terms of
> > bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> > add support for parsing bandwidth OPPs from DT.
> >
> > Signed-off-by: Saravana Kannan <saravanak@google.com>
> > ---
> > drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
> > drivers/opp/opp.h | 4 +++-
> > 2 files changed, 35 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> > index c10c782d15aa..54fa70ed2adc 100644
> > --- a/drivers/opp/of.c
> > +++ b/drivers/opp/of.c
> > @@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
> > }
> > EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
> >
> > +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> > +{
> > + int ret;
> > + u64 rate;
> > + u32 bw;
> > +
> > + ret = of_property_read_u64(np, "opp-hz", &rate);
> > + if (!ret) {
> > + /*
> > + * Rate is defined as an unsigned long in clk API, and so
> > + * casting explicitly to its type. Must be fixed once rate is 64
> > + * bit guaranteed in clk API.
> > + */
> > + new_opp->rate = (unsigned long)rate
> now that the rate gets set here, please remove the rate assignment in
> _opp_add_static_v2
>
> > + return 0;
> > + }
> > +
> > + ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
> > + if (ret)
> > + return ret;
> > + new_opp->rate = (unsigned long) &bw;
>
> should be bw instead

Good catch. Thanks!

>
> > +
> > + ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
> > + if (!ret)
> > + new_opp->avg_bw = (unsigned long) &bw;
>
> ditto
>
> > +
> > + return 0;
> > +}
> > +
> > /**
> > * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
> > * @opp_table: OPP table
> > @@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
> > if (!new_opp)
> > return ERR_PTR(-ENOMEM);
> >
> > - ret = of_property_read_u64(np, "opp-hz", &rate);
> > + ret = _read_opp_key(new_opp, np);
> > if (ret < 0) {
> > /* "opp-hz" is optional for devices like power domains. */
> > if (!opp_table->is_genpd) {
> > - dev_err(dev, "%s: opp-hz not found\n", __func__);
> > + dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
> > + __func__);
>
> please remove the else part where rate value will be reset.

Ah! I flipped the meaning of the "if" check in my head. Thanks!

-Saravana

\
 
 \ /
  Last update: 2019-07-16 21:12    [W:0.085 / U:1.432 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site