lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/8] PCI: Add quirk to disable MSI support for Amazon's Annapurna Labs host bridge
On Thu, Jul 11, 2019 at 05:56:25PM +0300, Jonathan Chocron wrote:
> On some platforms, the host bridge exposes an MSI-X capability but
> doesn't actually support it.
> This causes a crash during initialization by the pcieport driver, since
> it tries to configure the MSI-X capability.

Nit: The formatting above is jarring to read because I can't tell
whether it's one paragraph or two.

Either rewrap it into a single paragraph or add a blank line to make
two paragraphs. I noticed this elsewhere, too, in a comment, I think.

s/host bridge/Root Port/, if I understand correctly.

I don't understand the "on some platforms..." part. Do you mean that
on *every* platform, this particular host bridge (identified by
[1c36:0031]) advertises an MSI-X capability that doesn't work?

Or are there some platforms that configure the bridge so it doesn't
advertise MSI-X at all, while other platforms configure it so it
*does* advertise MSI-X?

If there's a line or two of diagnostics from the crash you could
include here, that would help people who encounter the crash find
the solution.

> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
> ---
> drivers/pci/quirks.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 11850b030637..0fb70d755977 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -2925,6 +2925,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
> quirk_msi_intx_disable_qca_bug);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
> quirk_msi_intx_disable_qca_bug);
> +
> +static void quirk_al_msi_disable(struct pci_dev *dev)
> +{
> + dev->no_msi = 1;
> + dev_warn(&dev->dev, "Annapurna Labs pcie quirk - disabling MSI\n");

s/pcie/PCIe/ in English text, comments, printk strings, etc.

Actually, I think the whole "Annapurna Labs pcie quirk" part is
probably unnecessary, since we can identify the device via the
dev_printk() info.

Speaking of which, you can use "pci_warn(dev)" here to be consistent
with the rest of the file.

> +}
> +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
> + PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);

Why do you use the class fixup here instead of the simpler
DECLARE_PCI_FIXUP_FINAL()? Requiring the class to match
PCI_CLASS_BRIDGE_PCI suggests that there may be other [1c36:0031]
devices that are not Root Ports. If that's the case, please mention
it so it's clear why we need DECLARE_PCI_FIXUP_CLASS_FINAL(). If not,
just use DECLARE_PCI_FIXUP_FINAL().

> #endif /* CONFIG_PCI_MSI */
>
> /*
> --
> 2.17.1
>
>

\
 
 \ /
  Last update: 2019-07-12 15:05    [W:0.899 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site