lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.2 31/61] usb: renesas_usbhs: add a workaround for a race condition of workqueue
Date
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit b2357839c56ab7d06bcd4e866ebc2d0e2b7997f3 upstream.

The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic
context bug") fixed an atomic issue by using workqueue for the shdmac
dmaengine driver. However, this has a potential race condition issue
between the work pending and usbhsg_ep_free_request() in gadget mode.
When usbhsg_ep_free_request() is called while pending the queue,
since the work_struct will be freed and then the work handler is
called, kernel panic happens on process_one_work().

To fix the issue, if we could call cancel_work_sync() at somewhere
before the free request, it could be easy. However,
the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver
calls free request via gether_disconnect()).

For now, almost all users are having "USB-DMAC" and the DMAengine
driver can be used on atomic. So, this patch adds a workaround for
a race condition to call the DMAengine APIs without the workqueue.

This means we still have TODO on shdmac environment (SH7724), but
since it doesn't have SMP, the race condition might not happen.

Fixes: ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/renesas_usbhs/fifo.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -802,9 +802,8 @@ static int __usbhsf_dma_map_ctrl(struct
}

static void usbhsf_dma_complete(void *arg);
-static void xfer_work(struct work_struct *work)
+static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt)
{
- struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
struct usbhs_pipe *pipe = pkt->pipe;
struct usbhs_fifo *fifo;
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -812,12 +811,10 @@ static void xfer_work(struct work_struct
struct dma_chan *chan;
struct device *dev = usbhs_priv_to_dev(priv);
enum dma_transfer_direction dir;
- unsigned long flags;

- usbhs_lock(priv, flags);
fifo = usbhs_pipe_to_fifo(pipe);
if (!fifo)
- goto xfer_work_end;
+ return;

chan = usbhsf_dma_chan_get(fifo, pkt);
dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
@@ -826,7 +823,7 @@ static void xfer_work(struct work_struct
pkt->trans, dir,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc)
- goto xfer_work_end;
+ return;

desc->callback = usbhsf_dma_complete;
desc->callback_param = pipe;
@@ -834,7 +831,7 @@ static void xfer_work(struct work_struct
pkt->cookie = dmaengine_submit(desc);
if (pkt->cookie < 0) {
dev_err(dev, "Failed to submit dma descriptor\n");
- goto xfer_work_end;
+ return;
}

dev_dbg(dev, " %s %d (%d/ %d)\n",
@@ -845,8 +842,17 @@ static void xfer_work(struct work_struct
dma_async_issue_pending(chan);
usbhsf_dma_start(pipe, fifo);
usbhs_pipe_enable(pipe);
+}
+
+static void xfer_work(struct work_struct *work)
+{
+ struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
+ struct usbhs_pipe *pipe = pkt->pipe;
+ struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+ unsigned long flags;

-xfer_work_end:
+ usbhs_lock(priv, flags);
+ usbhsf_dma_xfer_preparing(pkt);
usbhs_unlock(priv, flags);
}

@@ -899,8 +905,13 @@ static int usbhsf_dma_prepare_push(struc
pkt->trans = len;

usbhsf_tx_irq_ctrl(pipe, 0);
- INIT_WORK(&pkt->work, xfer_work);
- schedule_work(&pkt->work);
+ /* FIXME: Workaound for usb dmac that driver can be used in atomic */
+ if (usbhs_get_dparam(priv, has_usb_dmac)) {
+ usbhsf_dma_xfer_preparing(pkt);
+ } else {
+ INIT_WORK(&pkt->work, xfer_work);
+ schedule_work(&pkt->work);
+ }

return 0;

@@ -1006,8 +1017,7 @@ static int usbhsf_dma_prepare_pop_with_u

pkt->trans = pkt->length;

- INIT_WORK(&pkt->work, xfer_work);
- schedule_work(&pkt->work);
+ usbhsf_dma_xfer_preparing(pkt);

return 0;


\
 
 \ /
  Last update: 2019-07-12 14:37    [W:0.243 / U:6.328 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site