lkml.org 
[lkml]   [2019]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] dt-bindings: pinctrl: aspeed: Document AST2600 pinmux
On Wed, Jul 10, 2019 at 10:19 PM Andrew Jeffery <andrew@aj.id.au> wrote:
>
> The AST260 differs from the 2400 and 2500 in that it supports multiple
> groups for a subset of functions.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> .../pinctrl/aspeed,ast2600-pinctrl.yaml | 128 ++++++++++++++++++
> 1 file changed, 128 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> new file mode 100644
> index 000000000000..dd31f8e62433
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED AST2600 Pin Controller
> +
> +maintainers:
> + - Andrew Jeffery <andrew@aj.id.au>
> +
> +description: |+
> + The pin controller node should be the child of a syscon node with the
> + required property:
> +
> + - compatible: Should be one of the following:
> + "aspeed,ast2600-scu", "syscon", "simple-mfd"
> +
> + Refer to the the bindings described in
> + Documentation/devicetree/bindings/mfd/syscon.txt
> +
> +properties:
> + compatible:
> + const: aspeed,ast2600-pinctrl
> +
> +patternProperties:
> + '^.*$':
> + if:
> + type: object
> + then:
> + patternProperties:
> + "^function$":

That's a fixed string, not a pattern, so just put under 'properties'.

> + allOf:
> + - $ref: "/schemas/types.yaml#/definitions/string"
> + - enum: [ "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13",

You can drop the quoting here. I wouldn't really care, but yours is
one of the few right now and everyone will copy.

> + "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7",
> + "ADC8", "ADC9", "BMCINT", "ESPI", "ESPIALT", "FSI1", "FSI2",
> + "FWSPIABR", "FWSPID", "FWSPIWP", "GPIT0", "GPIT1", "GPIT2",
> + "GPIT3", "GPIT4", "GPIT5", "GPIT6", "GPIT7", "GPIU0", "GPIU1",
> + "GPIU2", "GPIU3", "GPIU4", "GPIU5", "GPIU6", "GPIU7", "I2C1",
> + "I2C10", "I2C11", "I2C12", "I2C13", "I2C14", "I2C15", "I2C16",
> + "I2C2", "I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8", "I2C9",
> + "I3C3", "I3C4", "I3C5", "I3C6", "JTAGM", "LHPD", "LHSIRQ", "LPC",
> + "LPCHC", "LPCPD", "LPCPME", "LPCSMI", "LSIRQ", "MACLINK1",
> + "MACLINK2", "MACLINK3", "MACLINK4", "MDIO1", "MDIO2", "MDIO3",
> + "MDIO4", "NCTS1", "NCTS2", "NCTS3", "NCTS4", "NDCD1", "NDCD2",
> + "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3", "NDSR4", "NDTR1",
> + "NDTR2", "NDTR3", "NDTR4", "NRI1", "NRI2", "NRI3", "NRI4",
> + "NRTS1", "NRTS2", "NRTS3", "NRTS4", "OSCCLK", "PEWAKE", "PWM0",
> + "PWM1", "PWM10", "PWM11", "PWM12", "PWM13", "PWM14", "PWM15",
> + "PWM2", "PWM3", "PWM4", "PWM5", "PWM6", "PWM7", "PWM8", "PWM9",
> + "RGMII1", "RGMII2", "RGMII3", "RGMII4", "RMII1", "RMII2",
> + "RMII3", "RMII4", "RXD1", "RXD2", "RXD3", "RXD4", "SALT1",
> + "SALT10", "SALT11", "SALT12", "SALT13", "SALT14", "SALT15",
> + "SALT16", "SALT2", "SALT3", "SALT4", "SALT5", "SALT6", "SALT7",
> + "SALT8", "SALT9", "SD1", "SD2", "SD3", "SD3DAT4", "SD3DAT5",
> + "SD3DAT6", "SD3DAT7", "SGPM1", "SGPS1", "SIOONCTRL", "SIOPBI",
> + "SIOPBO", "SIOPWREQ", "SIOPWRGD", "SIOS3", "SIOS5", "SIOSCI",
> + "SPI1", "SPI1ABR", "SPI1CS1", "SPI1WP", "SPI2", "SPI2CS1",
> + "SPI2CS2", "TACH0", "TACH1", "TACH10", "TACH11", "TACH12",
> + "TACH13", "TACH14", "TACH15", "TACH2", "TACH3", "TACH4", "TACH5",
> + "TACH6", "TACH7", "TACH8", "TACH9", "THRU0", "THRU1", "THRU2",
> + "THRU3", "TXD1", "TXD2", "TXD3", "TXD4", "UART10", "UART11",
> + "UART12", "UART13", "UART6", "UART7", "UART8", "UART9", "VB",
> + "VGAHS", "VGAVS", "WDTRST1", "WDTRST2", "WDTRST3", "WDTRST4", ]
> + "^groups$":
> + allOf:
> + - $ref: "/schemas/types.yaml#/definitions/string"
> + - enum: [ "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13",
> + "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7",
> + "ADC8", "ADC9", "BMCINT", "ESPI", "ESPIALT", "FSI1", "FSI2",
> + "FWSPIABR", "FWSPID", "FWQSPID", "FWSPIWP", "GPIT0", "GPIT1",
> + "GPIT2", "GPIT3", "GPIT4", "GPIT5", "GPIT6", "GPIT7", "GPIU0",
> + "GPIU1", "GPIU2", "GPIU3", "GPIU4", "GPIU5", "GPIU6", "GPIU7",
> + "HVI3C3", "HVI3C4", "I2C1", "I2C10", "I2C11", "I2C12", "I2C13",
> + "I2C14", "I2C15", "I2C16", "I2C2", "I2C3", "I2C4", "I2C5",
> + "I2C6", "I2C7", "I2C8", "I2C9", "I3C3", "I3C4", "I3C5", "I3C6",
> + "JTAGM", "LHPD", "LHSIRQ", "LPC", "LPCHC", "LPCPD", "LPCPME",
> + "LPCSMI", "LSIRQ", "MACLINK1", "MACLINK2", "MACLINK3",
> + "MACLINK4", "MDIO1", "MDIO2", "MDIO3", "MDIO4", "NCTS1", "NCTS2",
> + "NCTS3", "NCTS4", "NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1",
> + "NDSR2", "NDSR3", "NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4",
> + "NRI1", "NRI2", "NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3",
> + "NRTS4", "OSCCLK", "PEWAKE", "PWM0", "PWM1", "PWM10G0",
> + "PWM10G1", "PWM11G0", "PWM11G1", "PWM12G0", "PWM12G1", "PWM13G0",
> + "PWM13G1", "PWM14G0", "PWM14G1", "PWM15G0", "PWM15G1", "PWM2",
> + "PWM3", "PWM4", "PWM5", "PWM6", "PWM7", "PWM8G0", "PWM8G1",
> + "PWM9G0", "PWM9G1", "QSPI1", "QSPI2", "RGMII1", "RGMII2",
> + "RGMII3", "RGMII4", "RMII1", "RMII2", "RMII3", "RMII4", "RXD1",
> + "RXD2", "RXD3", "RXD4", "SALT1", "SALT10G0", "SALT10G1",
> + "SALT11G0", "SALT11G1", "SALT12G0", "SALT12G1", "SALT13G0",
> + "SALT13G1", "SALT14G0", "SALT14G1", "SALT15G0", "SALT15G1",
> + "SALT16G0", "SALT16G1", "SALT2", "SALT3", "SALT4", "SALT5",
> + "SALT6", "SALT7", "SALT8", "SALT9G0", "SALT9G1", "SD1", "SD2",
> + "SD3", "SD3DAT4", "SD3DAT5", "SD3DAT6", "SD3DAT7", "SGPM1",
> + "SGPS1", "SIOONCTRL", "SIOPBI", "SIOPBO", "SIOPWREQ", "SIOPWRGD",
> + "SIOS3", "SIOS5", "SIOSCI", "SPI1", "SPI1ABR", "SPI1CS1",
> + "SPI1WP", "SPI2", "SPI2CS1", "SPI2CS2", "TACH0", "TACH1",
> + "TACH10", "TACH11", "TACH12", "TACH13", "TACH14", "TACH15",
> + "TACH2", "TACH3", "TACH4", "TACH5", "TACH6", "TACH7", "TACH8",
> + "TACH9", "THRU0", "THRU1", "THRU2", "THRU3", "TXD1", "TXD2",
> + "TXD3", "TXD4", "UART10", "UART11", "UART12G0", "UART12G1",
> + "UART13G0", "UART13G1", "UART6", "UART7", "UART8", "UART9", "VB",
> + "VGAHS", "VGAVS", "WDTRST1", "WDTRST2", "WDTRST3", "WDTRST4", ]
> +
> +required:
> + - compatible
> +
> +examples:
> + - |
> + syscon: scu@1e6e2000 {
> + compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
> + reg = <0x1e6e2000 0xf6c>;
> +
> + pinctrl: pinctrl {
> + compatible = "aspeed,g6-pinctrl";
> +
> + pinctrl_pwm10g1_default: pwm10g1_default {
> + function = "PWM10";
> + groups = "PWM10G1";
> + };
> +
> + pinctrl_gpioh0_unbiased_default: gpioh0 {
> + pins = "A18";
> + bias-disable;

This node and properties aren't getting checked. Need to figure out
how to do that. That may mean needing some structure to the node
names. You can worry about that later I suppose.

Rob

\
 
 \ /
  Last update: 2019-07-11 19:19    [W:0.055 / U:0.528 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site