lkml.org 
[lkml]   [2019]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH] Revert "of/device: Really only set bus DMA mask when appropriate"
On Thu, Feb 28, 2019 at 2:42 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2019-02-28 10:33 pm, Alistair Francis wrote:
> > This reverts commit 6778be4e520959659b27a441c06a84c9cb009085.
> >
> > Reverting the commit fixes these error messages and an non-functioning
> > USB bus when attaching a USB to PCIe card to a RISC-V board:
> > xhci_hcd 0000:03:00.0: Host took too long to start, waited 16000 microseconds.
> > xhci_hcd 0000:03:00.0: startup error -19
> > xhci_hcd 0000:03:00.0: USB bus 2 deregistered
> > xhci_hcd 0000:03:00.0: WARNING: Host System Error
> > xhci_hcd 0000:03:00.0: remove, state 1
> >
> > Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> > I'm not sure if this is the correct fix, it's possible something else is
> > wrong, but I wanted to get some feedback.
>
> Given that the bug which this revert would reintroduce cripples DMA on
> just about every 64-bit DT system, probably not. Can you clarify what
> your DT looks like, and turn on the debug output for of_dma_get_range()
> to see what it says?

Hey Robin,

We were just talking about this today and somebody pointed out that I
never replied to you. I'm sorry, I must have missed your email.

To answer the question the DT looks like this:

/ {
soc {
pcie: pcie@2030000000 {
#address-cells = <0x3>;
#interrupt-cells = <0x1>;
#size-cells = <0x2>;
compatible = "microsemi,ms-pf-axi-pcie-host";
device_type = "pci";
bus-range = <0x01 0x7f>;
interrupt-map = <0 0 0 1 &ms_pcie_intc 0 0 0 0
2 &ms_pcie_intc 1 0 0 0 3 &ms_pcie_intc 2 0 0 0 4 &ms_pcie_intc 3>;
interrupt-map-mask = <0 0 0 7>;
interrupt-parent = <&plic0>;
interrupts = <32>;
ranges = <0x3000000 0x0 0x40000000 0x0
0x40000000 0x0 0x20000000>;
reg = <0x20 0x30000000 0x0 0x4000000 0x20 0x0
0x0 0x100000>;
reg-names = "control", "apb";
ms_pcie_intc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
};
};
};
};

and this is what the debug output looks like:

...
[ 0.071003] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.071049] microsemi-pcie 2030000000.pcie: device is not dma coherent
[ 0.071084] microsemi-pcie 2030000000.pcie: device is not behind an iommu
[ 0.071924] microsemi-pcie 2030000000.pcie: host bridge
/soc/pcie@2030000000 ranges:
[ 0.071990] microsemi-pcie 2030000000.pcie: Parsing ranges property...
[ 0.072007] microsemi-pcie 2030000000.pcie: MEM
0x40000000..0x5fffffff -> 0x40000000
[ 0.072160] microsemi-pcie 2030000000.pcie: PCI host bridge to bus 0000:00
[ 0.072201] pci_bus 0000:00: root bus resource [bus 01-7f]
[ 0.072237] pci_bus 0000:00: root bus resource [mem 0x40000000-0x5fffffff]
[ 0.072272] pci_bus 0000:00: scanning bus
[ 0.072307] pci 0000:00:00.0: [11aa:1556] type 01 class 0x060400
[ 0.072376] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff
64bit pref]
[ 0.072520] pci 0000:00:00.0: supports D1 D2
[ 0.072555] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.072592] pci 0000:00:00.0: PME# disabled
[ 0.073250] pci_bus 0000:00: fixups for bus
[ 0.073261] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.073270] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.073338] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.073423] pci_bus 0000:01: scanning bus
[ 0.073764] pci 0000:01:00.0: [11f8:8561] type 01 class 0x060400
[ 0.074549] pci 0000:01:00.0: enabling Extended Tags
[ 0.077512] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.077571] pci 0000:01:00.0: PME# disabled
[ 0.077842] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth,
limited by 5 GT/s x4 link at 0000:00:00.0 (capable of 126.016 Gb/s
with 8 GT/s x16 link)
[ 0.090347] pci_bus 0000:01: fixups for bus
[ 0.090367] pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.090375] pci 0000:01:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.090522] pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.090992] pci_bus 0000:02: scanning bus
[ 0.091134] pci 0000:02:00.0: [11f8:8561] type 01 class 0x060400
[ 0.091883] pci 0000:02:00.0: enabling Extended Tags
[ 0.095138] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.095198] pci 0000:02:00.0: PME# disabled
[ 0.095724] pci 0000:02:01.0: [11f8:8561] type 01 class 0x060400
[ 0.097486] pci 0000:02:01.0: enabling Extended Tags
[ 0.099562] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.099622] pci 0000:02:01.0: PME# disabled
[ 0.101335] pci 0000:02:02.0: [11f8:8561] type 01 class 0x060400
[ 0.103141] pci 0000:02:02.0: enabling Extended Tags
[ 0.105219] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.105278] pci 0000:02:02.0: PME# disabled
[ 0.106874] pci 0000:02:03.0: [11f8:8561] type 01 class 0x060400
[ 0.107626] pci 0000:02:03.0: enabling Extended Tags
[ 0.110896] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.110955] pci 0000:02:03.0: PME# disabled
[ 0.112929] pci_bus 0000:02: fixups for bus
[ 0.112950] pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.112958] pci 0000:02:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.113089] pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.113097] pci 0000:02:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.113225] pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.113233] pci 0000:02:02.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.113360] pci 0000:02:03.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.113368] pci 0000:02:03.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.113496] pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.114790] pci_bus 0000:03: scanning bus
[ 0.114964] pci 0000:03:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.115247] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.117139] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117198] pci 0000:03:00.0: PME# disabled
[ 0.130432] pci_bus 0000:03: fixups for bus
[ 0.130441] pci_bus 0000:03: bus scan returning with max=03
[ 0.130451] pci_bus 0000:03: busn_res: [bus 03-7f] end is updated to 03
[ 0.130551] pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.131022] pci_bus 0000:04: scanning bus
[ 0.131155] pci 0000:04:00.0: [1002:677b] type 00 class 0x030000
[ 0.132409] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x0fffffff
64bit pref]
[ 0.132581] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x0001ffff 64bit]
[ 0.132681] pci 0000:04:00.0: reg 0x20: [io 0x0000-0x00ff]
[ 0.132855] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.132968] pci 0000:04:00.0: enabling Extended Tags
[ 0.134750] pci 0000:04:00.0: supports D1 D2
[ 0.135109] pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth,
limited by 2.5 GT/s x4 link at 0000:02:01.0 (capable of 32.000 Gb/s
with 2.5 GT/s x16 link)
[ 0.135381] pci 0000:04:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[ 0.136308] pci 0000:04:00.1: [1002:aa98] type 00 class 0x040300
[ 0.136630] pci 0000:04:00.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 0.138228] pci 0000:04:00.1: enabling Extended Tags
[ 0.138806] pci 0000:04:00.1: supports D1 D2
[ 0.141489] pci_bus 0000:04: fixups for bus
[ 0.141497] pci_bus 0000:04: bus scan returning with max=04
[ 0.141507] pci_bus 0000:04: busn_res: [bus 04-7f] end is updated to 04
[ 0.141606] pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.142599] pci_bus 0000:05: scanning bus
[ 0.143101] pci_bus 0000:05: fixups for bus
[ 0.143108] pci_bus 0000:05: bus scan returning with max=05
[ 0.143117] pci_bus 0000:05: busn_res: [bus 05-7f] end is updated to 05
[ 0.143217] pci 0000:02:03.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.144234] pci_bus 0000:06: scanning bus
[ 0.144383] pci 0000:06:00.0: [1b4b:9125] type 00 class 0x010601
[ 0.144823] pci 0000:06:00.0: reg 0x10: [io 0x8000-0x8007]
[ 0.144954] pci 0000:06:00.0: reg 0x14: [io 0x8040-0x8043]
[ 0.145093] pci 0000:06:00.0: reg 0x18: [io 0x8100-0x8107]
[ 0.145222] pci 0000:06:00.0: reg 0x1c: [io 0x8140-0x8143]
[ 0.146140] pci 0000:06:00.0: reg 0x20: [io 0x800000-0x80000f]
[ 0.146270] pci 0000:06:00.0: reg 0x24: [mem 0x00900000-0x009007ff]
[ 0.146398] pci 0000:06:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref]
[ 0.148053] pci 0000:06:00.0: PME# supported from D3hot
[ 0.148112] pci 0000:06:00.0: PME# disabled
[ 0.150640] pci_bus 0000:06: fixups for bus
[ 0.150649] pci_bus 0000:06: bus scan returning with max=06
[ 0.150658] pci_bus 0000:06: busn_res: [bus 06-7f] end is updated to 06
[ 0.150744] pci_bus 0000:02: bus scan returning with max=06
[ 0.150753] pci_bus 0000:02: busn_res: [bus 02-7f] end is updated to 06
[ 0.150844] pci_bus 0000:01: bus scan returning with max=06
[ 0.150853] pci_bus 0000:01: busn_res: [bus 01-7f] end is updated to 06
[ 0.150891] pci_bus 0000:00: bus scan returning with max=06
[ 0.150905] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to
[bus 03] add_size 1000
[ 0.150968] pci 0000:02:00.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
add_align 100000
[ 0.151032] pci 0000:02:00.0: bridge window [mem
0x00100000-0x001fffff] to [bus 03] add_size 100000 add_align 100000
[ 0.151098] pci 0000:02:01.0: bridge window [mem
0x00100000-0x001fffff] to [bus 04] add_size 100000 add_align 100000
[ 0.151159] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to
[bus 05] add_size 1000
[ 0.151221] pci 0000:02:02.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
add_align 100000
[ 0.151283] pci 0000:02:02.0: bridge window [mem
0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.151348] pci 0000:02:03.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
add_align 100000
[ 0.151412] pci 0000:02:03.0: bridge window [mem
0x00100000-0x001fffff] to [bus 06] add_size 100000 add_align 100000
[ 0.151475] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] to
[bus 02-06] add_size 2000
[ 0.151541] pci 0000:01:00.0: bridge window [mem
0x00100000-0x004fffff] to [bus 02-06] add_size 500000 add_align 100000
[ 0.151603] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff] to
[bus 01-06] add_size 2000
[ 0.151666] pci 0000:00:00.0: bridge window [mem
0x00100000-0x004fffff] to [bus 01-06] add_size 500000 add_align 100000
[ 0.151736] pci 0000:00:00.0: BAR 0: no space for [mem size
0x80000000 64bit pref]
[ 0.151794] pci 0000:00:00.0: BAR 0: failed to assign [mem size
0x80000000 64bit pref]
[ 0.151855] pci 0000:00:00.0: BAR 9: assigned [mem
0x40000000-0x57ffffff 64bit pref]
[ 0.151913] pci 0000:00:00.0: BAR 8: assigned [mem 0x58000000-0x588fffff]
[ 0.151949] pci 0000:00:00.0: BAR 7: no space for [io size 0x4000]
[ 0.151985] pci 0000:00:00.0: BAR 7: failed to assign [io size 0x4000]
[ 0.152026] pci 0000:00:00.0: BAR 0: no space for [mem size
0x80000000 64bit pref]
[ 0.152083] pci 0000:00:00.0: BAR 0: failed to assign [mem size
0x80000000 64bit pref]
[ 0.152142] pci 0000:00:00.0: BAR 9: assigned [mem
0x40000000-0x57ffffff 64bit pref]
[ 0.152200] pci 0000:00:00.0: BAR 8: assigned [mem 0x58000000-0x583fffff]
[ 0.152237] pci 0000:00:00.0: BAR 7: no space for [io size 0x2000]
[ 0.152272] pci 0000:00:00.0: BAR 7: failed to assign [io size 0x2000]
[ 0.152311] pci 0000:00:00.0: BAR 8: reassigned [mem
0x58000000-0x588fffff] (expanded by 0x500000)
[ 0.152375] pci 0000:01:00.0: BAR 9: assigned [mem
0x40000000-0x57ffffff 64bit pref]
[ 0.152433] pci 0000:01:00.0: BAR 8: assigned [mem 0x58000000-0x588fffff]
[ 0.152469] pci 0000:01:00.0: BAR 7: no space for [io size 0x4000]
[ 0.152505] pci 0000:01:00.0: BAR 7: failed to assign [io size 0x4000]
[ 0.152543] pci 0000:01:00.0: BAR 7: no space for [io size 0x2000]
[ 0.152578] pci 0000:01:00.0: BAR 7: failed to assign [io size 0x2000]
[ 0.152638] pci 0000:02:01.0: BAR 9: assigned [mem
0x40000000-0x4fffffff 64bit pref]
[ 0.152697] pci 0000:02:00.0: BAR 8: assigned [mem 0x58000000-0x581fffff]
[ 0.152735] pci 0000:02:00.0: BAR 9: assigned [mem
0x50000000-0x501fffff 64bit pref]
[ 0.152793] pci 0000:02:01.0: BAR 8: assigned [mem 0x58200000-0x583fffff]
[ 0.152830] pci 0000:02:02.0: BAR 8: assigned [mem 0x58400000-0x585fffff]
[ 0.152867] pci 0000:02:02.0: BAR 9: assigned [mem
0x50200000-0x503fffff 64bit pref]
[ 0.152925] pci 0000:02:03.0: BAR 8: assigned [mem 0x58600000-0x587fffff]
[ 0.152963] pci 0000:02:03.0: BAR 9: assigned [mem
0x50400000-0x505fffff 64bit pref]
[ 0.153020] pci 0000:02:00.0: BAR 7: no space for [io size 0x1000]
[ 0.153056] pci 0000:02:00.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153092] pci 0000:02:01.0: BAR 7: no space for [io size 0x1000]
[ 0.153128] pci 0000:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153164] pci 0000:02:02.0: BAR 7: no space for [io size 0x1000]
[ 0.153199] pci 0000:02:02.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153235] pci 0000:02:03.0: BAR 7: no space for [io size 0x1000]
[ 0.153270] pci 0000:02:03.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153315] pci 0000:02:01.0: BAR 7: no space for [io size 0x1000]
[ 0.153350] pci 0000:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153386] pci 0000:02:03.0: BAR 7: no space for [io size 0x1000]
[ 0.153422] pci 0000:02:03.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153458] pci 0000:02:02.0: BAR 7: no space for [io size 0x1000]
[ 0.153493] pci 0000:02:02.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153530] pci 0000:02:00.0: BAR 7: no space for [io size 0x1000]
[ 0.153565] pci 0000:02:00.0: BAR 7: failed to assign [io size 0x1000]
[ 0.153606] pci 0000:03:00.0: BAR 0: assigned [mem
0x58000000-0x58000fff 64bit]
[ 0.153766] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.153852] pci 0000:02:00.0: bridge window [mem 0x58000000-0x581fffff]
[ 0.153967] pci 0000:02:00.0: bridge window [mem
0x50000000-0x501fffff 64bit pref]
[ 0.154163] pci 0000:04:00.0: BAR 0: assigned [mem
0x40000000-0x4fffffff 64bit pref]
[ 0.154327] pci 0000:04:00.0: BAR 2: assigned [mem
0x58200000-0x5821ffff 64bit]
[ 0.154653] pci 0000:04:00.0: BAR 6: assigned [mem
0x58220000-0x5823ffff pref]
[ 0.154712] pci 0000:04:00.1: BAR 0: assigned [mem
0x58240000-0x58243fff 64bit]
[ 0.154861] pci 0000:04:00.0: BAR 4: no space for [io size 0x0100]
[ 0.154896] pci 0000:04:00.0: BAR 4: failed to assign [io size 0x0100]
[ 0.154933] pci 0000:02:01.0: PCI bridge to [bus 04]
[ 0.155016] pci 0000:02:01.0: bridge window [mem 0x58200000-0x583fffff]
[ 0.155131] pci 0000:02:01.0: bridge window [mem
0x40000000-0x4fffffff 64bit pref]
[ 0.155333] pci 0000:02:02.0: PCI bridge to [bus 05]
[ 0.155418] pci 0000:02:02.0: bridge window [mem 0x58400000-0x585fffff]
[ 0.155532] pci 0000:02:02.0: bridge window [mem
0x50200000-0x503fffff 64bit pref]
[ 0.155726] pci 0000:06:00.0: BAR 6: assigned [mem
0x58600000-0x5860ffff pref]
[ 0.155784] pci 0000:06:00.0: BAR 5: assigned [mem 0x58610000-0x586107ff]
[ 0.155847] pci 0000:06:00.0: BAR 4: no space for [io size 0x0010]
[ 0.155883] pci 0000:06:00.0: BAR 4: failed to assign [io size 0x0010]
[ 0.155919] pci 0000:06:00.0: BAR 0: no space for [io size 0x0008]
[ 0.155954] pci 0000:06:00.0: BAR 0: failed to assign [io size 0x0008]
[ 0.155990] pci 0000:06:00.0: BAR 2: no space for [io size 0x0008]
[ 0.156025] pci 0000:06:00.0: BAR 2: failed to assign [io size 0x0008]
[ 0.156061] pci 0000:06:00.0: BAR 1: no space for [io size 0x0004]
[ 0.156096] pci 0000:06:00.0: BAR 1: failed to assign [io size 0x0004]
[ 0.156132] pci 0000:06:00.0: BAR 3: no space for [io size 0x0004]
[ 0.156167] pci 0000:06:00.0: BAR 3: failed to assign [io size 0x0004]
[ 0.156203] pci 0000:02:03.0: PCI bridge to [bus 06]
[ 0.156284] pci 0000:02:03.0: bridge window [mem 0x58600000-0x587fffff]
[ 0.156402] pci 0000:02:03.0: bridge window [mem
0x50400000-0x505fffff 64bit pref]
[ 0.156594] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.156671] pci 0000:01:00.0: bridge window [mem 0x58000000-0x588fffff]
[ 0.156796] pci 0000:01:00.0: bridge window [mem
0x40000000-0x57ffffff 64bit pref]
[ 0.157000] pci 0000:00:00.0: PCI bridge to [bus 01-06]
[ 0.157038] pci 0000:00:00.0: bridge window [mem 0x58000000-0x588fffff]
[ 0.157075] pci 0000:00:00.0: bridge window [mem
0x40000000-0x57ffffff 64bit pref]
[ 0.157169] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.157208] pcieport 0000:00:00.0: device is not dma coherent
[ 0.157242] pcieport 0000:00:00.0: device is not behind an iommu
[ 0.157339] pcieport 0000:00:00.0: assign IRQ: got 8
[ 0.157354] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.157403] pcieport 0000:00:00.0: enabling bus mastering
[ 0.157866] pcieport 0000:00:00.0: AER: enabled with IRQ 9
[ 0.158050] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.158091] pcieport 0000:01:00.0: device is not dma coherent
[ 0.158125] pcieport 0000:01:00.0: device is not behind an iommu
[ 0.158178] pcieport 0000:01:00.0: assign IRQ: got 0
[ 0.158224] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
[ 0.158431] pcieport 0000:01:00.0: enabling bus mastering
[ 0.160263] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.160304] pcieport 0000:02:00.0: device is not dma coherent
[ 0.160338] pcieport 0000:02:00.0: device is not behind an iommu
[ 0.160405] pcieport 0000:02:00.0: assign IRQ: got 0
[ 0.160453] pcieport 0000:02:00.0: enabling device (0000 -> 0002)
[ 0.160754] pcieport 0000:02:00.0: enabling bus mastering
[ 0.163911] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.163952] pcieport 0000:02:01.0: device is not dma coherent
[ 0.163986] pcieport 0000:02:01.0: device is not behind an iommu
[ 0.164039] pcieport 0000:02:01.0: assign IRQ: got 0
[ 0.164088] pcieport 0000:02:01.0: enabling device (0000 -> 0002)
[ 0.164371] pcieport 0000:02:01.0: enabling bus mastering
[ 0.166345] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.166386] pcieport 0000:02:02.0: device is not dma coherent
[ 0.166420] pcieport 0000:02:02.0: device is not behind an iommu
[ 0.166473] pcieport 0000:02:02.0: assign IRQ: got 0
[ 0.166534] pcieport 0000:02:02.0: enabling device (0000 -> 0002)
[ 0.167751] pcieport 0000:02:02.0: enabling bus mastering
[ 0.169982] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 0.170024] pcieport 0000:02:03.0: device is not dma coherent
[ 0.170058] pcieport 0000:02:03.0: device is not behind an iommu
[ 0.170113] pcieport 0000:02:03.0: assign IRQ: got 0
[ 0.170161] pcieport 0000:02:03.0: enabling device (0000 -> 0002)
[ 0.170446] pcieport 0000:02:03.0: enabling bus mastering
[ 0.173626] pci 0000:03:00.0: enabling device (0000 -> 0002)

...

[ 4.342236] OF: no dma-ranges found for node(/soc/pcie@2030000000)
[ 4.348329] xhci_hcd 0000:03:00.0: device is not dma coherent
[ 4.354058] xhci_hcd 0000:03:00.0: device is not behind an iommu
[ 4.360090] xhci_hcd 0000:03:00.0: assign IRQ: got 0
[ 4.360227] xhci_hcd 0000:03:00.0: enabling bus mastering
[ 4.360248] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 4.365281] xhci_hcd 0000:03:00.0: new USB bus registered, assigned
bus number 1
[ 4.373282] xhci_hcd 0000:03:00.0: hcc params 0x002841eb hci
version 0x100 quirks 0x0000000000000090
[ 4.381811] xhci_hcd 0000:03:00.0: enabling Mem-Wr-Inval
[ 4.382614] hub 1-0:1.0: USB hub found
[ 4.385637] hub 1-0:1.0: 1 port detected
[ 4.393190] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 4.398137] xhci_hcd 0000:03:00.0: new USB bus registered, assigned
bus number 2
[ 4.405507] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 4.411777] xhci_hcd 0000:03:00.0: WARNING: Host System Error
[ 4.417527] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 4.425983] hub 2-0:1.0: USB hub found
[ 4.429311] hub 2-0:1.0: 4 ports detected
...

Alistair



>
> Robin.
>
> > drivers/of/device.c | 4 +---
> > 1 file changed, 1 insertion(+), 3 deletions(-)
> >
> > diff --git a/drivers/of/device.c b/drivers/of/device.c
> > index 3717f2a20d0d..8299f8055da7 100644
> > --- a/drivers/of/device.c
> > +++ b/drivers/of/device.c
> > @@ -149,11 +149,9 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
> > * set by the driver.
> > */
> > mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1);
> > + dev->bus_dma_mask = mask;
> > dev->coherent_dma_mask &= mask;
> > *dev->dma_mask &= mask;
> > - /* ...but only set bus mask if we found valid dma-ranges earlier */
> > - if (!ret)
> > - dev->bus_dma_mask = mask;
> >
> > coherent = of_dma_is_coherent(np);
> > dev_dbg(dev, "device is%sdma coherent\n",
> >

\
 
 \ /
  Last update: 2019-07-11 00:31    [W:0.760 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site