lkml.org 
[lkml]   [2019]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [v2,2/2] Documentation: dt: binding: rtc: add binding for ftm alarm driver
On Wed, Jul 10, 2019 at 6:35 AM Biwen Li <biwen.li@nxp.com> wrote:
>
> The patch adds binding for ftm alarm driver
>
> Signed-off-by: Biwen Li <biwen.li@nxp.com>

Looks like I commented the older version just now. Adding Rob to this
version too.

> ---
> Change in v2:
> - replace ls1043a with ls1088a as example
> - add rcpm node and fsl,rcpm-wakeup property
>
> .../devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt | 40 ++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> new file mode 100644
> index 0000000..010984a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> @@ -0,0 +1,40 @@
> +Freescale FlexTimer Module (FTM) Alarm
> +
> +Note: The driver need work with RCPM driver to wake up system in sleep.
> +
> +Required properties:
> +
> +- compatible : Should be "fsl,ftm-alarm" or "fsl,<chip>-ftm-alarm", the
> + supported chips include
> + "fsl,ls1012a-ftm-alarm"
> + "fsl,ls1021a-ftm-alarm"
> + "fsl,ls1028a-ftm-alarm"
> + "fsl,ls1043a-ftm-alarm"
> + "fsl,ls1046a-ftm-alarm"
> + "fsl,ls1088a-ftm-alarm"
> + "fsl,ls208xa-ftm-alarm"
> +- reg : Specifies base physical address and size of the register sets for the
> + FlexTimer Module and base physical address of IP Powerdown Exception Control
> + Register.
> +- reg-names: names of the mapped memory regions listed in regs property.
> + should include the following entries:
> + "ftm": Address of the register sets for FlexTimer Module
> +- interrupts : Should be the FlexTimer Module interrupt.
> +- fsl,rcpm-wakeup property and rcpm node : Please refer
> + Documentation/devicetree/bindings/soc/fsl/rcpm.txt

Looks better.

> +- big-endian: If the host controller is big-endian mode, specify this property.
> + The default endian mode is little-endian.

Same comment about optional property.

> +
> +Example:
> +rcpm: rcpm@1e34050 {
> + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
> + reg = <0x0 0x1e34050 0x0 0x4>;
> + fsl,#rcpm-wakeup-cells = <1>;
> +}
> +
> +ftm_alarm0: timer@2800000 {
> + compatible = "fsl,ftm-alarm";
> + reg = <0x0 0x2800000 0x0 0x10000>;
> + fsl,rcpm-wakeup = <&rcpm 0x0 0x4000>;
> + interrupts = <0 44 4>;
> +}
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-07-10 21:46    [W:0.123 / U:1.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site