lkml.org 
[lkml]   [2019]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2,2/2] Documentation: dt: binding: rtc: add binding for ftm alarm driver
Date
The patch adds binding for ftm alarm driver

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v2:
- replace ls1043a with ls1088a as example
- add rcpm node and fsl,rcpm-wakeup property

.../devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
new file mode 100644
index 0000000..010984a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
@@ -0,0 +1,40 @@
+Freescale FlexTimer Module (FTM) Alarm
+
+Note: The driver need work with RCPM driver to wake up system in sleep.
+
+Required properties:
+
+- compatible : Should be "fsl,ftm-alarm" or "fsl,<chip>-ftm-alarm", the
+ supported chips include
+ "fsl,ls1012a-ftm-alarm"
+ "fsl,ls1021a-ftm-alarm"
+ "fsl,ls1028a-ftm-alarm"
+ "fsl,ls1043a-ftm-alarm"
+ "fsl,ls1046a-ftm-alarm"
+ "fsl,ls1088a-ftm-alarm"
+ "fsl,ls208xa-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+ FlexTimer Module and base physical address of IP Powerdown Exception Control
+ Register.
+- reg-names: names of the mapped memory regions listed in regs property.
+ should include the following entries:
+ "ftm": Address of the register sets for FlexTimer Module
+- interrupts : Should be the FlexTimer Module interrupt.
+- fsl,rcpm-wakeup property and rcpm node : Please refer
+ Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+- big-endian: If the host controller is big-endian mode, specify this property.
+ The default endian mode is little-endian.
+
+Example:
+rcpm: rcpm@1e34050 {
+ compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34050 0x0 0x4>;
+ fsl,#rcpm-wakeup-cells = <1>;
+}
+
+ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x4000>;
+ interrupts = <0 44 4>;
+}
--
2.7.4
\
 
 \ /
  Last update: 2019-07-10 13:14    [W:0.072 / U:54.928 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site