lkml.org 
[lkml]   [2019]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon (occ): Add temp sensor value check
Date
From: Alexander Soldatov <a.soldatov@yadro.com>

The occ driver supports two formats for the temp sensor value.

The OCC firmware for P8 supports only the first format, for which
no range checking or error processing is performed in the driver.
Inspecting the OCC sources for P8 reveals that OCC may send
a special value 0xFFFF to indicate that a sensor read timeout
has occurred, see

https://github.com/open-power/occ/blob/master_p8/src/occ/cmdh/cmdh_fsp_cmds.c#L395

That situation wasn't handled in the driver. This patch adds invalid
temp value check for the sensor data format 1 and handles it the same
way as it is done for the format 2, where EREMOTEIO is reported for
this case.

Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register hwmon device")
Signed-off-by: Alexander Soldatov <a.soldatov@yadro.com>
Signed-off-by: Alexander Amelkin <a.amelkin@yadro.com>
Reviewed-by: Alexander Amelkin <a.amelkin@yadro.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/hwmon/occ/common.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index cccf91742c1a..a7d2b16dd702 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -241,6 +241,12 @@ static ssize_t occ_show_temp_1(struct device *dev,
val = get_unaligned_be16(&temp->sensor_id);
break;
case 1:
+ /*
+ * If a sensor reading has expired and couldn't be refreshed,
+ * OCC returns 0xFFFF for that sensor.
+ */
+ if (temp->value == 0xFFFF)
+ return -EREMOTEIO;
val = get_unaligned_be16(&temp->value) * 1000;
break;
default:
--
2.20.1
\
 
 \ /
  Last update: 2019-07-10 09:26    [W:0.047 / U:2.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site