lkml.org 
[lkml]   [2019]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 210/241] tty: max310x: Fix external crystal register setup
Date
From: Joe Burmeister <joe.burmeister@devtank.co.uk>

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/tty/serial/max310x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -571,7 +571,7 @@ static int max310x_set_ref_clk(struct ma
}

/* Configure clock source */
- clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
+ clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0);

/* Configure PLL */
if (pllcfg) {

\
 
 \ /
  Last update: 2019-06-09 19:06    [W:0.940 / U:0.024 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site