lkml.org 
[lkml]   [2019]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 20/83] xhci: update bounce buffer with correct sg num
Date
From: Henry Lin <henryl@nvidia.com>

commit 597c56e372dab2c7f79b8d700aad3a5deebf9d1b upstream.

This change fixes a data corruption issue occurred on USB hard disk for
the case that bounce buffer is used during transferring data.

While updating data between sg list and bounce buffer, current
implementation passes mapped sg number (urb->num_mapped_sgs) to
sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data
not get copied if target buffer is located in the elements after
mapped sg elements. This change passes sg number for full list to
fix issue.

Besides, for copying data from bounce buffer, calling dma_unmap_single()
on the bounce buffer before copying data to sg list can avoid cache issue.

Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -678,6 +678,7 @@ void xhci_unmap_td_bounce_buffer(struct
struct device *dev = xhci_to_hcd(xhci)->self.controller;
struct xhci_segment *seg = td->bounce_seg;
struct urb *urb = td->urb;
+ size_t len;

if (!seg || !urb)
return;
@@ -688,11 +689,14 @@ void xhci_unmap_td_bounce_buffer(struct
return;
}

- /* for in tranfers we need to copy the data from bounce to sg */
- sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
- seg->bounce_len, seg->bounce_offs);
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
DMA_FROM_DEVICE);
+ /* for in tranfers we need to copy the data from bounce to sg */
+ len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+ seg->bounce_len, seg->bounce_offs);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci, "WARN Wrong bounce buffer read length: %ld != %d\n",
+ len, seg->bounce_len);
seg->bounce_len = 0;
seg->bounce_offs = 0;
}
@@ -3163,6 +3167,7 @@ static int xhci_align_td(struct xhci_hcd
unsigned int unalign;
unsigned int max_pkt;
u32 new_buff_len;
+ size_t len;

max_pkt = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
unalign = (enqd_len + *trb_buff_len) % max_pkt;
@@ -3193,8 +3198,12 @@ static int xhci_align_td(struct xhci_hcd

/* create a max max_pkt sized bounce buffer pointed to by last trb */
if (usb_urb_dir_out(urb)) {
- sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+ len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
seg->bounce_buf, new_buff_len, enqd_len);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci,
+ "WARN Wrong bounce buffer write length: %ld != %d\n",
+ len, seg->bounce_len);
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_TO_DEVICE);
} else {

\
 
 \ /
  Last update: 2019-06-09 18:53    [W:0.249 / U:6.432 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site