lkml.org 
[lkml]   [2019]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 22/33] docs: pps.txt: convert to ReST and rename to pps.rst
Date
This file is already in a good shape: just its title and
adding some literal block markups is needed for it to be
part of the document.

While it has a small chapter with sysfs stuff, most of
the document is focused on driver development.

As it describes a kernel API, move it to the driver-api
directory.

In order to avoid conflicts, let's add an :orphan: tag
to it, to be removed when added to the driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
.../{pps/pps.txt => driver-api/pps.rst} | 67 ++++++++++---------
MAINTAINERS | 2 +-
2 files changed, 36 insertions(+), 33 deletions(-)
rename Documentation/{pps/pps.txt => driver-api/pps.rst} (89%)

diff --git a/Documentation/pps/pps.txt b/Documentation/driver-api/pps.rst
similarity index 89%
rename from Documentation/pps/pps.txt
rename to Documentation/driver-api/pps.rst
index 99f5d8c4c652..1456d2c32ebd 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/driver-api/pps.rst
@@ -1,8 +1,10 @@
+:orphan:

- PPS - Pulse Per Second
- ----------------------
+======================
+PPS - Pulse Per Second
+======================

-(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+Copyright (C) 2007 Rodolfo Giometti <giometti@enneenne.com>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -88,7 +90,7 @@ Coding example
--------------

To register a PPS source into the kernel you should define a struct
-pps_source_info as follows:
+pps_source_info as follows::

static struct pps_source_info pps_ktimer_info = {
.name = "ktimer",
@@ -101,12 +103,12 @@ pps_source_info as follows:
};

and then calling the function pps_register_source() in your
-initialization routine as follows:
+initialization routine as follows::

source = pps_register_source(&pps_ktimer_info,
PPS_CAPTUREASSERT | PPS_OFFSETASSERT);

-The pps_register_source() prototype is:
+The pps_register_source() prototype is::

int pps_register_source(struct pps_source_info *info, int default_params)

@@ -118,7 +120,7 @@ pps_source_info which describe the capabilities of the driver).

Once you have registered a new PPS source into the system you can
signal an assert event (for example in the interrupt handler routine)
-just using:
+just using::

pps_event(source, &ts, PPS_CAPTUREASSERT, ptr)

@@ -134,13 +136,13 @@ Please see the file drivers/pps/clients/pps-ktimer.c for example code.
SYSFS support
-------------

-If the SYSFS filesystem is enabled in the kernel it provides a new class:
+If the SYSFS filesystem is enabled in the kernel it provides a new class::

$ ls /sys/class/pps/
pps0/ pps1/ pps2/

Every directory is the ID of a PPS sources defined in the system and
-inside you find several files:
+inside you find several files::

$ ls -F /sys/class/pps/pps0/
assert dev mode path subsystem@
@@ -148,7 +150,7 @@ inside you find several files:


Inside each "assert" and "clear" file you can find the timestamp and a
-sequence number:
+sequence number::

$ cat /sys/class/pps/pps0/assert
1170026870.983207967#8
@@ -175,11 +177,11 @@ and the userland tools available in your distribution's pps-tools package,
http://linuxpps.org , or https://github.com/redlab-i/pps-tools.

Once you have enabled the compilation of pps-ktimer just modprobe it (if
-not statically compiled):
+not statically compiled)::

# modprobe pps-ktimer

-and the run ppstest as follow:
+and the run ppstest as follow::

$ ./ppstest /dev/pps1
trying PPS source "/dev/pps1"
@@ -204,26 +206,27 @@ nor affordable. The cheap way is to load a PPS generator on one of the
computers (master) and PPS clients on others (slaves), and use very simple
cables to deliver signals using parallel ports, for example.

-Parallel port cable pinout:
-pin name master slave
-1 STROBE *------ *
-2 D0 * | *
-3 D1 * | *
-4 D2 * | *
-5 D3 * | *
-6 D4 * | *
-7 D5 * | *
-8 D6 * | *
-9 D7 * | *
-10 ACK * ------*
-11 BUSY * *
-12 PE * *
-13 SEL * *
-14 AUTOFD * *
-15 ERROR * *
-16 INIT * *
-17 SELIN * *
-18-25 GND *-----------*
+Parallel port cable pinout::
+
+ pin name master slave
+ 1 STROBE *------ *
+ 2 D0 * | *
+ 3 D1 * | *
+ 4 D2 * | *
+ 5 D3 * | *
+ 6 D4 * | *
+ 7 D5 * | *
+ 8 D6 * | *
+ 9 D7 * | *
+ 10 ACK * ------*
+ 11 BUSY * *
+ 12 PE * *
+ 13 SEL * *
+ 14 AUTOFD * *
+ 15 ERROR * *
+ 16 INIT * *
+ 17 SELIN * *
+ 18-25 GND *-----------*

Please note that parallel port interrupt occurs only on high->low transition,
so it is used for PPS assert edge. PPS clear edge can be determined only
diff --git a/MAINTAINERS b/MAINTAINERS
index 01d9120bb83b..b982622ea7ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12689,7 +12689,7 @@ M: Rodolfo Giometti <giometti@enneenne.com>
W: http://wiki.enneenne.com/index.php/LinuxPPS_support
L: linuxpps@ml.enneenne.com (subscribers-only)
S: Maintained
-F: Documentation/pps/
+F: Documentation/driver-api/pps.rst
F: Documentation/devicetree/bindings/pps/pps-gpio.txt
F: Documentation/ABI/testing/sysfs-pps
F: drivers/pps/
--
2.21.0
\
 
 \ /
  Last update: 2019-06-09 04:30    [W:0.245 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site