lkml.org 
[lkml]   [2019]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.1 27/70] net: stmmac: fix csr_clk can't be zero issue
Date
From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit 5e7f7fc538d894b2d9aa41876b8dcf35f5fe11e6 ]

The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.

Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++++-
2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8cebc44108b2..635d88d82610 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4380,10 +4380,10 @@ int stmmac_dvr_probe(struct device *device,
* set the MDC clock dynamically according to the csr actual
* clock input.
*/
- if (!priv->plat->clk_csr)
- stmmac_clk_csr_set(priv);
- else
+ if (priv->plat->clk_csr >= 0)
priv->clk_csr = priv->plat->clk_csr;
+ else
+ stmmac_clk_csr_set(priv);

stmmac_check_pcs_mode(priv);

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3031f2bf15d6..f45bfbef97d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -408,7 +408,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
/* Default to phy auto-detection */
plat->phy_addr = -1;

- /* Get clk_csr from device tree */
+ /* Default to get clk_csr from stmmac_clk_crs_set(),
+ * or get clk_csr from device tree.
+ */
+ plat->clk_csr = -1;
of_property_read_u32(np, "clk_csr", &plat->clk_csr);

/* "snps,phy-addr" is not a standard property. Mark it as deprecated
--
2.20.1
\
 
 \ /
  Last update: 2019-06-08 13:54    [W:1.064 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site