lkml.org 
[lkml]   [2019]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 4/8] arm64: Fix interrupt tracing in the presence of NMIs
From
Date


On 07/06/2019 16:42, Marc Zyngier wrote:
> On 06/06/2019 10:31, Julien Thierry wrote:
>> In the presence of any form of instrumentation, nmi_enter() should be
>> done before calling any traceable code and any instrumentation code.
>>
>> Currently, nmi_enter() is done in handle_domain_nmi(), which is much
>> too late as instrumentation code might get called before. Move the
>> nmi_enter/exit() calls to the arch IRQ vector handler.
>>
>> On arm64, it is not possible to know if the IRQ vector handler was
>> called because of an NMI before acknowledging the interrupt. However, It
>> is possible to know whether normal interrupts could be taken in the
>> interrupted context (i.e. if taking an NMI in that context could
>> introduce a potential race condition).
>>
>> When interrupting a context with IRQs disabled, call nmi_enter() as soon
>> as possible. In contexts with IRQs enabled, defer this to the interrupt
>> controller, which is in a better position to know if an interrupt taken
>> is an NMI.
>>
>> Fixes: bc3c03ccb ("arm64: Enable the support of pseudo-NMIs")
>> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Jason Cooper <jason@lakedaemon.net>
>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> ---
>> arch/arm64/kernel/entry.S | 44 +++++++++++++++++++++++++++++++++-----------
>> arch/arm64/kernel/irq.c | 17 +++++++++++++++++
>> drivers/irqchip/irq-gic-v3.c | 6 ++++++
>> kernel/irq/irqdesc.c | 8 ++++++--
>> 4 files changed, 62 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
>> index 89ab6bd..46358a3 100644
>> --- a/arch/arm64/kernel/entry.S
>> +++ b/arch/arm64/kernel/entry.S
>> @@ -435,6 +435,20 @@ tsk .req x28 // current thread_info
>> irq_stack_exit
>> .endm
>>
>> +#ifdef CONFIG_ARM64_PSEUDO_NMI
>> + /*
>> + * Set res to 0 if irqs were masked in interrupted context.
>
> Is that comment right? This macro seems to return 0 if PMR is equal to
> GIC_PRIO_IRQON, meaning that irqs are unmasked...

You're right, the comment is wrong. At least the references to the macro
seem to be doing the right thing and interpreting 0 as "irqs were
unmasked" :) .

>
>> + * Otherwise set res to non-0 value.
>> + */
>> + .macro test_irqs_unmasked res:req, pmr:req
>> +alternative_if ARM64_HAS_IRQ_PRIO_MASKING
>> + sub \res, \pmr, #GIC_PRIO_IRQON
>> +alternative_else
>> + mov \res, xzr
>> +alternative_endif
>> + .endm
>> +#endif
>> +
>> .text
>>
>> /*
>> @@ -631,19 +645,19 @@ ENDPROC(el1_sync)
>> el1_irq:
>> kernel_entry 1
>> enable_da_f
>> -#ifdef CONFIG_TRACE_IRQFLAGS
>> +
>> #ifdef CONFIG_ARM64_PSEUDO_NMI
>> alternative_if ARM64_HAS_IRQ_PRIO_MASKING
>> ldr x20, [sp, #S_PMR_SAVE]
>> -alternative_else
>> - mov x20, #GIC_PRIO_IRQON
>> -alternative_endif
>> - cmp x20, #GIC_PRIO_IRQOFF
>> - /* Irqs were disabled, don't trace */
>> - b.ls 1f
>> +alternative_else_nop_endif
>> + test_irqs_unmasked res=x0, pmr=x20
>> + cbz x0, 1f
>> + bl asm_nmi_enter
>> +1:
>> #endif
>> +
>> +#ifdef CONFIG_TRACE_IRQFLAGS
>> bl trace_hardirqs_off
>> -1:
>> #endif
>>
>> irq_handler
>> @@ -662,14 +676,22 @@ alternative_else_nop_endif
>> bl preempt_schedule_irq // irq en/disable is done inside
>> 1:
>> #endif
>> -#ifdef CONFIG_TRACE_IRQFLAGS
>> +
>> #ifdef CONFIG_ARM64_PSEUDO_NMI
>> /*
>> * if IRQs were disabled when we received the interrupt, we have an NMI
>> * and we are not re-enabling interrupt upon eret. Skip tracing.
>> */
>> - cmp x20, #GIC_PRIO_IRQOFF
>> - b.ls 1f
>> + test_irqs_unmasked res=x0, pmr=x20
>> + cbz x0, 1f
>> + bl asm_nmi_exit
>> +1:
>> +#endif
>> +
>> +#ifdef CONFIG_TRACE_IRQFLAGS
>> +#ifdef CONFIG_ARM64_PSEUDO_NMI
>> + test_irqs_unmasked res=x0, pmr=x20
>> + cbnz x0, 1f
>> #endif
>> bl trace_hardirqs_on
>> 1:
>> diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
>> index 92fa817..fdd9cb2 100644
>> --- a/arch/arm64/kernel/irq.c
>> +++ b/arch/arm64/kernel/irq.c
>> @@ -27,8 +27,10 @@
>> #include <linux/smp.h>
>> #include <linux/init.h>
>> #include <linux/irqchip.h>
>> +#include <linux/kprobes.h>
>> #include <linux/seq_file.h>
>> #include <linux/vmalloc.h>
>> +#include <asm/daifflags.h>
>> #include <asm/vmap_stack.h>
>>
>> unsigned long irq_err_count;
>> @@ -76,3 +78,18 @@ void __init init_IRQ(void)
>> if (!handle_arch_irq)
>> panic("No interrupt controller found.");
>> }
>> +
>> +/*
>> + * Stubs to make nmi_enter/exit() code callable from ASM
>> + */
>> +asmlinkage void notrace asm_nmi_enter(void)
>> +{
>> + nmi_enter();
>> +}
>> +NOKPROBE_SYMBOL(asm_nmi_enter);
>> +
>> +asmlinkage void notrace asm_nmi_exit(void)
>> +{
>> + nmi_exit();
>> +}
>> +NOKPROBE_SYMBOL(asm_nmi_exit);
>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>> index f44cd89..0bf0fc4 100644
>> --- a/drivers/irqchip/irq-gic-v3.c
>> +++ b/drivers/irqchip/irq-gic-v3.c
>> @@ -495,7 +495,13 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
>>
>> if (gic_supports_nmi() &&
>> unlikely(gic_read_rpr() == GICD_INT_NMI_PRI)) {
>> + if (interrupts_enabled(regs))
>> + nmi_enter();
>> +
>> gic_handle_nmi(irqnr, regs);
>> +
>> + if (interrupts_enabled(regs))
>> + nmi_exit();
>
> Just to be on the safe side, I'd rather sample interrupts_enabled(regs)
> and use the same value to decide whether to do nmi_exit or not.
>

Fair enough.

In case there are no other issues, can this (and the comment) be amended
or shall respin the series? (If there are other isues raised I'll just
respin).

Thanks,

--
Julien Thierry

\
 
 \ /
  Last update: 2019-06-07 17:54    [W:0.049 / U:0.920 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site