lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
> On Thu,  6 Jun 2019 17:12:04 +0200
> Vitor Soares <Vitor.Soares@synopsys.com> wrote:
>
> > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > spi and i2c mode.
> >
> > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to
> > them.
> >
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > ---
> > Changes in v2:
> > Add support for LSM6DSR
> > Set pm_ops to st_lsm6dsx_pm_ops
> >
> > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 ++-
> > drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 76 +++++++++++++++++++++++++++++
> > 3 files changed, 84 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > index 002a423..8115936 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > @@ -2,11 +2,12 @@
> >
> > config IIO_ST_LSM6DSX
> > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> > - depends on (I2C || SPI)
> > + depends on (I2C || SPI || I3C)
> > select IIO_BUFFER
> > select IIO_KFIFO_BUF
> > select IIO_ST_LSM6DSX_I2C if (I2C)
> > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> > + select IIO_ST_LSM6DSX_I3C if (I3C)
> > help
> > Say yes here to build support for STMicroelectronics LSM6DSx imu
> > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> > @@ -24,3 +25,8 @@ config IIO_ST_LSM6DSX_SPI
> > tristate
> > depends on IIO_ST_LSM6DSX
> > select REGMAP_SPI
> > +
> > +config IIO_ST_LSM6DSX_I3C
> > + tristate
> > + depends on IIO_ST_LSM6DSX
> > + select REGMAP_I3C
> > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
> > index 28cc673..57cbcd6 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> > @@ -5,3 +5,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
> > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
> > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
> > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > new file mode 100644
> > index 0000000..70b70d1
> > --- /dev/null
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > @@ -0,0 +1,76 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> > + *
> > + * Author: Vitor Soares <vitor.soares@synopsys.com>
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/i3c/device.h>
> > +#include <linux/i3c/master.h>
> > +#include <linux/slab.h>
> > +#include <linux/of.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "st_lsm6dsx.h"
> > +
> > +#define NAME_SIZE 32
> > +
> > +struct st_lsm6dsx_i3c_data {
> > + const char name[NAME_SIZE];
>
> I think I mentioned already that you can simply have
>
> const char *name;
>
> > + enum st_lsm6dsx_hw_id id;
> > +};
> > +
> > +enum st_lsm6dsx_i3c_data_id {
> > + ST_LSM6DSO_I3C_DATA_ID,
> > + ST_LSM6DSR_I3C_DATA_ID,
> > +};
> > +
> > +static const struct st_lsm6dsx_i3c_data hw_data[] = {
> > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
> > + { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
> > +};
> > +
> > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> > +{
> > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev);
> > + const struct st_lsm6dsx_i3c_data *hw_data = id->data;
> > + struct regmap *regmap;
> > +
> > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> > + (int)PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id,
> > + hw_data->name, regmap);
> > +}
> > +
> > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> > + I3C_DEVICE(0x0104, 0x006C, &hw_data[ST_LSM6DSO_I3C_DATA_ID]),
> > + I3C_DEVICE(0x0104, 0x006B, &hw_data[ST_LSM6DSR_I3C_DATA_ID]),
>
> Still find that form counter-intuitive since you'd have to first go
> look at what's the value of ST_LSM6DSO_I3C_DATA_ID, then go check the
> entry in hw_data to find what's in there. Too many ways to get things
> wrong IMHO.
>
> The following form would make it much more obvious/easy to follow:
>
> static const st_lsm6dsx_i3c_data st_lsm6dso_i3c_data = {
> ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID,
> };
>
> static const st_lsm6dsx_i3c_data st_lsm6dsr_i3c_data = {
> ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID,
> };
>
> static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> I3C_DEVICE(0x0104, 0x006C, &st_lsm6dso_i3c_data),
> I3C_DEVICE(0x0104, 0x006B, &st_lsm6dsr_i3c_data),
> };
>
> Note that I don't see why we need to pass both the name and the ID to
> st_lsm6dsx_probe(). I'd expect the name to be easily deducible from the
> ID (using a name table whose index would match the ST_XXX_ID).

for spi/i2c we got it for free since spi_device_id/i2c_device_id has a name
field we can use but we can probably align it to i3c case

Regards,
Lorenzo

>
> If you do this change you would actually get rid of the
> st_lsm6dsx_i3c_data struct and instead have:
>
> static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> };
>
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> > +
> > +static struct i3c_driver st_lsm6dsx_driver = {
> > + .driver = {
> > + .name = "st_lsm6dsx_i3c",
> > + .pm = &st_lsm6dsx_pm_ops,
> > + },
> > + .probe = st_lsm6dsx_i3c_probe,
> > + .id_table = st_lsm6dsx_i3c_ids,
> > +};
> > +module_i3c_driver(st_lsm6dsx_driver);
> > +
> > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> > +MODULE_LICENSE("GPL v2");
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-06-06 19:51    [W:0.045 / U:13.740 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site