lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/2] dt-bindings: Document the DesignWare IP reset bindings
Date
This adds documentation of device tree bindings for the
DesignWare IP reset controller.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
---
Changelog
- Add active low configuration example
- Fix compatible string in the active high example

.../devicetree/bindings/reset/snps,dw-reset.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt

diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 0000000..85f3301
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+ "snps,dw-high-reset" - for active high configuration
+ "snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #reset-cells: must be 1.
+
+example:
+
+ dw_rst_1: reset-controller@0000 {
+ compatible = "snps,dw-high-reset";
+ reg = <0x0000 0x4>;
+ #reset-cells = <1>;
+ };
+
+ dw_rst_2: reset-controller@1000 {i
+ compatible = "snps,dw-low-reset";
+ reg = <0x1000 0x8>;
+ #reset-cells = <1>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2019-06-06 17:37    [W:0.088 / U:0.476 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site