lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] [RFC] dmaengine: add fifo_size member
From
Date

On 6/6/2019 11:30 AM, Peter Ujfalusi wrote:
> Hi Sameer,
>
> On 06/06/2019 6.49, Sameer Pujar wrote:
>> Sorry for late reply.
>> [Resending the reply since delivery failed for few recipients]
>> I discussed this internally with HW folks and below is the reason why
>> DMA needs
>> to know FIFO size.
>>
>> - FIFOs reside in peripheral device(ADMAIF), which is the ADMA interface
>> to the audio sub-system.
>> - ADMAIF has multiple channels and share FIFO buffer for individual
>> operations. There is a provision
>>   to allocate specific fifo size for each individual ADMAIF channel from
>> the shared buffer.
>> - Tegra Audio DMA(ADMA) architecture is different from the usual DMA
>> engines, which you described earlier.
> It is not really different than what other DMAs are doing.
>
>> - The flow control logic is placed inside ADMA. Slave peripheral
>> device(ADMAIF) signals ADMA whenever a
>>   read or write happens on the FIFO(per WORD basis). Please note that
>> the signaling is per channel. There is
>>   no other signaling present from ADMAIF to ADMA.
>> - ADMA keeps a counter related to above signaling. Whenever a sufficient
>> space is available, it initiates a transfer.
>>   But the question is, how does it know when to transfer. This is the
>> reason, why ADMA has to be aware of FIFO
>>   depth of ADMAIF channel. Depending on the counters and FIFO depth, it
>> knows exactly when a free space is available
>>   in the context of a specific channel. On ADMA, FIFO_SIZE is just a
>> value which should match to actual FIFO_DEPTH/SIZE
>>   of ADMAIF channel.
>> - Now consider two cases based on above logic,
>>   * Case 1: when DMA_FIFO_SIZE > SLAVE_FIFO_SIZE
>>     In this case, ADMA thinks that there is enough space available for
>> transfer, when actually the FIFO data
>>     on slave is not consumed yet. It would result in OVERRUN.
>>   * Case 2: when DMA_FIFO_SIZE < SLAVE_FIFO_SIZE
>>     This is case where ADMA won’t transfer, even though sufficient space
>> is available, resulting in UNDERRUN.
>> - The guideline is to program, DMA_FIFO_SIZE(on ADMA side) =
>> SLAVE_FIFO_SIZE(on ADMAIF side) and hence we need a
>>   way to communicate fifo size info to ADMA.
> The src_maxburst / dst_maxburst is exactly for this reason. To
> communicate how much data should be transferred per DMA request to/from
> peripheral.
>
> In TI land we have now 3 DMA engines servicing McASP. McASP has FIFO
> which is dynamically configured (you can see the AFIFO of McASP as a
> small DMA: on McASP side it services the peripheral, on the other side
> it interacts with the given system DMA used by the SoC - EDMA, sDMA or
> UDMAP). All DMAs needs a bit different configuration, but the AFIFO
> depth on the McASP side is coming in via the src/dst_maxburst and the
> drivers just need to interpret it correctly.
>
> It does sounds like that FIFO_SIZE == src/dst_maxburst in your case as well.
Not exactly equal.
ADMA burst_size can range from 1(WORD) to 16(WORDS)
FIFO_SIZE can be adjusted from 16(WORDS) to 1024(WORDS) [can vary in
multiples of 16]

So without this RFC patch, I need to do following.
- pass FIFO_SIZE via src/dst_maxburst (from peripheral ADMAIF driver)
- DMA driver can have following code,
  * Program DMA_FIFO_SIZE value from src/dst_maxburst
  * Add below logic
    if (src/dst_maxburst > 16)
        program ADMA burst_size = 16
    else
        program ADMA burst_size = 8 (1/2 of minimum FIFO depth of
ADMAIF channel)

With above, the flexibility to program ADMA burst_size to any of the
required values in the specified range is not there.
Hence ideally would have liked to have independent control over
burst_size and fifo_size on ADMA side.
If there is no merit in this, I will update ADMA/ADMAIF driver as
mentioned above.

Thanks,
Sameer.

>
> - Péter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-06-06 08:42    [W:0.365 / U:30.672 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site