lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [PATCH v6 4/5] usb: host: Stops USB controller init if PLL fails to lock
Date


> -----Original Message-----
> From: Alan Stern [mailto:stern@rowland.harvard.edu]
> Sent: 2019年6月5日 22:22
> To: Yinbo Zhu <yinbo.zhu@nxp.com>
> Cc: Xiaobo Xie <xiaobo.xie@nxp.com>; Greg Kroah-Hartman
> <gregkh@linuxfoundation.org>; Ramneek Mehresh
> <ramneek.mehresh@freescale.com>; Nikhil Badola
> <nikhil.badola@freescale.com>; Ran Wang <ran.wang_1@nxp.com>;
> linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org; Jiafei Pan
> <jiafei.pan@nxp.com>
> Subject: [EXT] Re: [PATCH v6 4/5] usb: host: Stops USB controller init if PLL fails to
> lock
>
> Caution: EXT Email
>
> On Wed, 5 Jun 2019, Yinbo Zhu wrote:
>
> > From: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> >
> > USB erratum-A006918 workaround tries to start internal PHY inside
> > uboot (when PLL fails to lock). However, if the workaround also fails,
> > then USB initialization is also stopped inside Linux.
> > Erratum-A006918 workaround failure creates "fsl,erratum_a006918"
> > node in device-tree. Presence of this node in device-tree is used to
> > stop USB controller initialization in Linux
> >
> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> > Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
> > Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> > ---
> > Change in v6:
> > add a "Fall through" comment
> >
> > drivers/usb/host/ehci-fsl.c | 10 +++++++++-
> > drivers/usb/host/fsl-mph-dr-of.c | 3 ++-
> > 2 files changed, 11 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> > index 8f3bf3efb038..86ae37086a74 100644
> > --- a/drivers/usb/host/ehci-fsl.c
> > +++ b/drivers/usb/host/ehci-fsl.c
> > @@ -234,8 +234,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> > break;
> > case FSL_USB2_PHY_UTMI_WIDE:
> > portsc |= PORT_PTS_PTW;
> > - /* fall through */
> > case FSL_USB2_PHY_UTMI:
> > + /* Presence of this node "has_fsl_erratum_a006918"
> > + * in device-tree is used to stop USB controller
> > + * initialization in Linux
> > + */
> > + if (pdata->has_fsl_erratum_a006918) {
> > + dev_warn(dev, "USB PHY clock invalid\n");
> > + return -EINVAL;
> > + }
> > +
> > case FSL_USB2_PHY_UTMI_DUAL:
>
>
> You need to add a "Fall through" comment between these two cases.
> > case FSL_USB2_PHY_UTMI_DUAL:
> > /* PHY_CLK_VALID bit is de-featured from all controller
> > * versions below 2.4 and is to be checked only for
>
> Alan Stern
> Hi Alan Stern,
>
> Your meaning is to remove "/* fall through*/" or add the erratum commont replace "/* fall through*/"
>
> Regards,
> Yinbo
> This is bad. You got rid of a "fall through" comment that was needed, and you
> failed to add another one where it was needed.
>
> Alan Stern
I don't get your meaning.
Yinbo
>
> > /* PHY_CLK_VALID bit is de-featured from all controller
> > * versions below 2.4 and is to be checked only for diff
> > --git a/drivers/usb/host/fsl-mph-dr-of.c
> > b/drivers/usb/host/fsl-mph-dr-of.c
> > index 4f8b8a08c914..762b97600ab0 100644
> > --- a/drivers/usb/host/fsl-mph-dr-of.c
> > +++ b/drivers/usb/host/fsl-mph-dr-of.c
> > @@ -224,13 +224,14 @@ static int fsl_usb2_mph_dr_of_probe(struct
> platform_device *ofdev)
> > of_property_read_bool(np, "fsl,usb-erratum-a005275");
> > pdata->has_fsl_erratum_a005697 =
> > of_property_read_bool(np, "fsl,usb_erratum-a005697");
> > + pdata->has_fsl_erratum_a006918 =
> > + of_property_read_bool(np, "fsl,usb_erratum-a006918");
> >
> > if (of_get_property(np, "fsl,usb_erratum_14", NULL))
> > pdata->has_fsl_erratum_14 = 1;
> > else
> > pdata->has_fsl_erratum_14 = 0;
> >
> > -
> > /*
> > * Determine whether phy_clk_valid needs to be checked
> > * by reading property in device tree
> >

\
 
 \ /
  Last update: 2019-06-06 08:36    [W:0.061 / U:6.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site