lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] USB: Disable USB2 LPM at shutdown
On Thu, 6 Jun 2019, Kai-Heng Feng wrote:

> at 15:55, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
>
> > at 18:22, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
> >
> >> at 00:01, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote:
> >>
> >>>> On Jan 30, 2019, at 16:21, Greg KH <gregkh@linuxfoundation.org> wrote:
> >>>>
> >>>> On Thu, Jan 24, 2019 at 02:16:43PM +0800, Kai-Heng Feng wrote:
> >>>>> The QCA Rome USB Bluetooth controller has several issues once LPM gets
> >>>>> enabled:
> >>>>> - Fails to get enumerated in coldboot. [1]
> >>>>> - Drains more power (~ 0.2W) when the system is in S5. [2]
> >>>>> - Disappears after a warmboot. [2]
> >>>>>
> >>>>> The issue happens because the device lingers at LPM L1 in S5, so device
> >>>>> can't get enumerated even after a reboot.
> >>>>>
> >>>>> Disable LPM at shutdown to solve the issue.
> >>>>>
> >>>>> [1] https://bugs.launchpad.net/bugs/1757218
> >>>>> [2] https://patchwork.kernel.org/patch/10607097/
> >>>>>
> >>>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >>>>> ---
> >>>>> v2: Use new LPM helpers.
> >>>>>
> >>>>> drivers/usb/core/port.c | 9 +++++++++
> >>>>> 1 file changed, 9 insertions(+)
> >>>>>
> >>>>> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
> >>>>> index 1a06a4b5fbb1..bbbb35fa639f 100644
> >>>>> --- a/drivers/usb/core/port.c
> >>>>> +++ b/drivers/usb/core/port.c
> >>>>> @@ -285,6 +285,14 @@ static int usb_port_runtime_suspend(struct
> >>>>> device *dev)
> >>>>> }
> >>>>> #endif
> >>>>>
> >>>>> +static void usb_port_shutdown(struct device *dev)
> >>>>> +{
> >>>>> + struct usb_port *port_dev = to_usb_port(dev);
> >>>>> +
> >>>>> + if (port_dev->child)
> >>>>> + usb_disable_usb2_hardware_lpm(port_dev->child);
> >>>>> +}
> >>>>> +
> >>>>> static const struct dev_pm_ops usb_port_pm_ops = {
> >>>>> #ifdef CONFIG_PM
> >>>>> .runtime_suspend = usb_port_runtime_suspend,
> >>>>> @@ -301,6 +309,7 @@ struct device_type usb_port_device_type = {
> >>>>> static struct device_driver usb_port_driver = {
> >>>>> .name = "usb",
> >>>>> .owner = THIS_MODULE,
> >>>>> + .shutdown = usb_port_shutdown,
> >>>>> };
> >>>>
> >>>> So you now do this for all ports in the system, no matter what is
> >>>> plugged in or not. Are you _SURE_ you want to do that? It seems like a
> >>>> big hammer to solve just one single device's problems.
> >>>
> >>> Yes I think this should be universally applied.
> >>>
> >>> I don’t think the bug only happens to one device. Users won’t find this
> >>> unless they connect their laptop to a power meter.
> >>>
> >>> Platform may not completely cut off USB bus power during shutdown,
> >>> so the device transits to L1 after system shutdown. Now xHC is disabled
> >>> so nothing can bring it back to L0 or L2.
> >>
> >> It would be great if someone can come up with better ideas.
> >>
> >> We can also use other approaches, but currently this is the only way I
> >> can think of.
> >
> > Alan and Mathias,
> >
> > It would be great if you can review this patch, or give me some suggestion.
>
> Can I get some advice here?
> I really think disabling LPM should be universally applied.
>
> Kai-Heng

I agree with Kai-Heng, this seems like a fairly light-weight solution
to a reasonable problem.

As to the issue of how much it will slow down system shutdowns, I have
no idea. Probably not very much, unless somebody has an unusually
large number of USB devices plugged in, but only testing can give a
real answer.

I suppose we could add an HCD flag for host controllers which require
this workaround. Either way, it's probably not a very big deal.

Alan Stern

\
 
 \ /
  Last update: 2019-06-06 16:18    [W:0.135 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site