lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt/bindings: drm/komeda: Adds SMMU support for D71 devicetree
Date
Updates the device-tree doc about how to enable SMMU by devicetree.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>

---
Documentation/devicetree/bindings/display/arm,komeda.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
index 02b2265..b12c045 100644
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ b/Documentation/devicetree/bindings/display/arm,komeda.txt
@@ -11,6 +11,10 @@ Required properties:
- "pclk": for the APB interface clock
- #address-cells: Must be 1
- #size-cells: Must be 0
+- iommus: configure the stream id to IOMMU, Must be configured if want to
+ enable iommu in display. for how to configure this node please reference
+ devicetree/bindings/iommu/arm,smmu-v3.txt,
+ devicetree/bindings/iommu/iommu.txt

Required properties for sub-node: pipeline@nq
Each device contains one or two pipeline sub-nodes (at least one), each
@@ -44,6 +48,9 @@ Example:
interrupts = <0 168 4>;
clocks = <&dpu_mclk>, <&dpu_aclk>;
clock-names = "mclk", "pclk";
+ iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+ <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+ <&smmu 8>, <&smmu 9>;

dp0_pipe0: pipeline@0 {
clocks = <&fpgaosc2>, <&dpu_aclk>;
--
1.9.1
\
 
 \ /
  Last update: 2019-06-06 11:53    [W:0.075 / U:18.672 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site