lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 02/13] clk: samsung: add new clocks for DMC for Exynos5422 SoC
From
Date
Hi Krzysztof,

On 6/6/19 10:34 AM, Krzysztof Kozlowski wrote:
> On Wed, 5 Jun 2019 at 18:54, Lukasz Luba <l.luba@partner.samsung.com> wrote:
>>
>> This patch provides support for clocks needed for Dynamic Memory Controller
>> in Exynos5422 SoC. It adds CDREX base register addresses, new DIV, MUX and
>> GATE entries.
>>
>> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
>> ---
>> drivers/clk/samsung/clk-exynos5420.c | 57 ++++++++++++++++++++++++++--
>> 1 file changed, 53 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
>> index 34cce3c5898f..eecbfcc6b3cf 100644
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -134,6 +134,8 @@
>> #define SRC_CDREX 0x20200
>> #define DIV_CDREX0 0x20500
>> #define DIV_CDREX1 0x20504
>> +#define GATE_BUS_CDREX0 0x20700
>> +#define GATE_BUS_CDREX1 0x20704
>> #define KPLL_LOCK 0x28000
>> #define KPLL_CON0 0x28100
>> #define SRC_KFC 0x28200
>> @@ -248,6 +250,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
>> DIV_CDREX1,
>> SRC_KFC,
>> DIV_KFC0,
>> + GATE_BUS_CDREX0,
>> + GATE_BUS_CDREX1,
>> };
>>
>> static const unsigned long exynos5800_clk_regs[] __initconst = {
>> @@ -425,6 +429,9 @@ PNAME(mout_group13_5800_p) = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
>> PNAME(mout_group14_5800_p) = { "dout_aclk550_cam", "dout_sclk_sw" };
>> PNAME(mout_group15_5800_p) = { "dout_osc_div", "mout_sw_aclk550_cam" };
>> PNAME(mout_group16_5800_p) = { "dout_osc_div", "mout_mau_epll_clk" };
>> +PNAME(mout_mx_mspll_ccore_phy_p) = { "sclk_bpll", "mout_sclk_dpll",
>> + "mout_sclk_mpll", "ff_dout_spll2",
>> + "mout_sclk_spll", "mout_sclk_epll"};
>>
>> /* fixed rate clocks generated outside the soc */
>> static struct samsung_fixed_rate_clock
>> @@ -450,7 +457,7 @@ static const struct samsung_fixed_factor_clock
>> static const struct samsung_fixed_factor_clock
>> exynos5800_fixed_factor_clks[] __initconst = {
>> FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
>> - FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
>> + FFACTOR(CLK_FF_DOUT_SPLL2, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
>> };
>>
>> static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
>> @@ -472,11 +479,14 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
>> MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
>> MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
>>
>> + MUX(CLK_MOUT_MX_MSPLL_CCORE_PHY, "mout_mx_mspll_ccore_phy",
>> + mout_mx_mspll_ccore_phy_p, SRC_TOP7, 0, 3),
>> +
>> MUX(CLK_MOUT_MX_MSPLL_CCORE, "mout_mx_mspll_ccore",
>> - mout_mx_mspll_ccore_p, SRC_TOP7, 16, 2),
>> + mout_mx_mspll_ccore_p, SRC_TOP7, 16, 3),
>> MUX_F(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
>> SRC_TOP7, 20, 2, CLK_SET_RATE_PARENT, 0),
>> - MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
>> + MUX(CLK_SCLK_BPLL, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
>> MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
>>
>> MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
>> @@ -648,7 +658,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
>>
>> MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
>> MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
>> - MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
>> + MUX(CLK_MOUT_SCLK_SPLL, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
>> MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
>> MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
>> MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
>> @@ -806,8 +816,21 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
>> "mout_aclk400_disp1", DIV_TOP2, 4, 3),
>>
>> /* CDREX Block */
>> + /*
>> + * The three clocks below are controlled using the same register and
>> + * bits. They are put into one because there is a need of
>> + * synchronization between the BUS and DREXs (two external memory
>> + * interfaces).
>> + * They are put here to show this HW assumption and for clock
>> + * information summary completeness.
>> + */
>> DIV(CLK_DOUT_PCLK_CDREX, "dout_pclk_cdrex", "dout_aclk_cdrex1",
>> DIV_CDREX0, 28, 3),
>> + DIV(CLK_DOUT_PCLK_DREX0, "dout_pclk_drex0", "dout_cclk_drex0",
>> + DIV_CDREX0, 28, 3),
>> + DIV(CLK_DOUT_PCLK_DREX1, "dout_pclk_drex1", "dout_cclk_drex0",
>> + DIV_CDREX0, 28, 3),
>
> Offline discussion with Marek and Sylwester suggested to add NOCACHE
> for the two clocks using the same bits. Otherwise I am fine:
Indeed, I have changed it and run some tests of these three clocks with:
-----------8<-------------------------
DIV_F(CLK_DOUT_PCLK_CDREX, "dout_pclk_cdrex", "dout_aclk_cdrex1",
DIV_CDREX0, 28, 3, CLK_GET_RATE_NOCACHE, 0),
DIV_F(CLK_DOUT_PCLK_DREX0, "dout_pclk_drex0", "dout_cclk_drex0",
DIV_CDREX0, 28, 3, CLK_GET_RATE_NOCACHE, 0),
DIV_F(CLK_DOUT_PCLK_DREX1, "dout_pclk_drex1", "dout_cclk_drex0",
DIV_CDREX0, 28, 3, CLK_GET_RATE_NOCACHE, 0),
--------------->8---------------------
>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Thank you for the review and ACK.

Regards,
Lukasz
>
> Best regards,
> Krzysztof
>
>

\
 
 \ /
  Last update: 2019-06-06 11:13    [W:0.097 / U:25.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site