lkml.org 
[lkml]   [2019]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] irqchip: al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
From
Date
On Thu, 2019-06-06 at 08:05 +0100, Marc Zyngier wrote:
>
> > I disagree Marc. This is a rather bad error which indicates that the
> > device-tree is probably incorrect (or the HW was wired in a way that
> > cannot work).
>
> But surely that's something you'll spot pretty quickly.

Not really. A level/edge mismatch isn't something you can spot that
quickly, but will cause lost interrupts on load. Since the kernel can
spot the error pretty much right away, I think that could even be a
pr_err :)

> Also, you get
> a splat from the irq subsystem already, telling you that things went
> wrong (see __irq_set_trigger). At that stage, you can enable debugging
> and figure it out.

Ah returning an error will cause such splat indeed.

> What I'm trying to avoid is the kernel becoming a (pretty bad)
> validation tool for DTS files.

Haha, yeah, I don't like it going out of its way to validate them but
that sort of very obvious sanity checking makes sense.

> > Basically a given FIC can either be entirely level sensitive or
> > entirely edge sensitive. This catches cases where the DT has routed
> > a mixed of both to the same FIC. Definitely worth barfing loudly
> > about rather than trying to understand subtle odd misbehaviours of
> > the device in the field.
>
> Then, in the interest of not producing incorrect DTs, could the
> edge/level property be encoded in the FIC description itself, rather
> than in the interrupt specifiers of the individual devices? It would
> sidestep the problem altogether. You can still put the wrong one in
> the FIC node, but it then becomes even more obvious what is going
> on...

This was Talel original approach internally in fact. I told him to put
it in the specifier instead :-) The advantage in doing it that way is
that you get the right flags in the descriptor by default iirc, so the
right value in /proc/interrupts etc... And it will continue working if
a future FIC loses that limitation.

That said, if you feel strongly about it, we can revert to putting a
global property in the FIC node itself. Let us know what you want.

Cheers,
Ben.


\
 
 \ /
  Last update: 2019-06-06 09:50    [W:0.040 / U:50.820 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site