lkml.org 
[lkml]   [2019]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: iio: adc: add adi,ad7780.yaml binding
On 05/26, Jonathan Cameron wrote:
>On Fri, 24 May 2019 22:26:30 -0300
>Renato Lui Geh <renatogeh@gmail.com> wrote:
>
>> This patch adds a YAML binding for the Analog Devices AD7780/1 and
>> AD7170/1 analog-to-digital converters.
>>
>> Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
>Looks good to me, but I'm still finding my feet with these so will
>leave it for a few days for others to have time to comment.
>
>Michael, looking for a quick reply from you to say if you are happy
>being explicitly listed as maintainer for this one, or if you'd
>rather land it on someone else. Same applies for patch 2.
>
>Renato, if I seem to have forgotten this in a week or so, feel
>free to give me a poke. I've been known to loose patches entirely!

Hi Jonathan,

Just here to give you a poke. :)

By the way, in these cases, which would be easier for you? To send you
an email like I'm doing right now on last week's thread; or to resend
the entire patch(set)?

Thanks,
Renato
>
>Thanks,
>
>Jonathan
>> ---
>> Changes in v2:
>> - vref-supply to avdd-supply
>> - remove avdd-supply from required list
>> - include adc block in an spi block
>>
>> .../bindings/iio/adc/adi,ad7780.txt | 48 ----------
>> .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++
>> 2 files changed, 87 insertions(+), 48 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>> deleted file mode 100644
>> index 440e52555349..000000000000
>> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>> +++ /dev/null
>> @@ -1,48 +0,0 @@
>> -* Analog Devices AD7170/AD7171/AD7780/AD7781
>> -
>> -Data sheets:
>> -
>> -- AD7170:
>> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
>> -- AD7171:
>> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
>> -- AD7780:
>> - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
>> -- AD7781:
>> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
>> -
>> -Required properties:
>> -
>> -- compatible: should be one of
>> - * "adi,ad7170"
>> - * "adi,ad7171"
>> - * "adi,ad7780"
>> - * "adi,ad7781"
>> -- reg: spi chip select number for the device
>> -- vref-supply: the regulator supply for the ADC reference voltage
>> -
>> -Optional properties:
>> -
>> -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If
>> - specified, it will be asserted during driver probe. As the
>> - line is active high, it should be marked GPIO_ACTIVE_HIGH.
>> -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for
>> - the ad778x chips. If specified, it will be asserted during
>> - driver probe. As the line is active low, it should be marked
>> - GPIO_ACTIVE_LOW.
>> -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
>> - for the ad778x chips. If specified, it will be asserted
>> - during driver probe. As the line is active low, it should be
>> - marked GPIO_ACTIVE_LOW.
>> -
>> -Example:
>> -
>> -adc@0 {
>> - compatible = "adi,ad7780";
>> - reg = <0>;
>> - vref-supply = <&vdd_supply>
>> -
>> - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
>> - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
>> - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>> new file mode 100644
>> index 000000000000..d1109416963c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
>> +
>> +maintainers:
>> + - Michael Hennerich <michael.hennerich@analog.com>
>> +
>> +description: |
>> + The ad7780 is a sigma-delta analog to digital converter. This driver provides
>> + reading voltage values and status bits from both the ad778x and ad717x series.
>> + Its interface also allows writing on the FILTER and GAIN GPIO pins on the
>> + ad778x.
>> +
>> + Specifications on the converters can be found at:
>> + AD7170:
>> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
>> + AD7171:
>> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
>> + AD7780:
>> + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
>> + AD7781:
>> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - adi,ad7170
>> + - adi,ad7171
>> + - adi,ad7780
>> + - adi,ad7781
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + avdd-supply:
>> + description:
>> + The regulator supply for the ADC reference voltage.
>> + maxItems: 1
>> +
>> + powerdown-gpios:
>> + description:
>> + Must be the device tree identifier of the PDRST pin. If
>> + specified, it will be asserted during driver probe. As the
>> + line is active high, it should be marked GPIO_ACTIVE_HIGH.
>> + maxItems: 1
>> +
>> + adi,gain-gpios:
>> + description:
>> + Must be the device tree identifier of the GAIN pin. Only for
>> + the ad778x chips. If specified, it will be asserted during
>> + driver probe. As the line is active low, it should be marked
>> + GPIO_ACTIVE_LOW.
>> + maxItems: 1
>> +
>> + adi,filter-gpios:
>> + description:
>> + Must be the device tree identifier of the FILTER pin. Only
>> + for the ad778x chips. If specified, it will be asserted
>> + during driver probe. As the line is active low, it should be
>> + marked GPIO_ACTIVE_LOW.
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/gpio/gpio.h>
>> + spi0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + adc@0 {
>> + compatible = "adi,ad7780";
>> + reg = <0>;
>> +
>> + avdd-supply = <&vdd_supply>;
>> + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
>> + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
>> + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>

\
 
 \ /
  Last update: 2019-06-05 22:36    [W:0.080 / U:24.468 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site