lkml.org 
[lkml]   [2019]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: A potential broken at platform driver?
On Mon, Jun 03, 2019 at 06:08:37PM -0500, Richard Gong wrote:
> Hi Greg,
>
> On 6/3/19 1:02 PM, Greg KH wrote:
> > On Mon, Jun 03, 2019 at 10:57:18AM -0500, Richard Gong wrote:
> > >
> > > Hi Greg,
> > >
> > > Following your suggestion, I replaced devm_device_add_groups() with .group =
> > > rus_groups in my version #4 submission. But I found out that RSU driver
> > > outputs the garbage data if I use .group = rsu_groups.
> >
> > What is "garbage"?
> I mean incorrect status info.
>
> >
> > > To make RSU driver work properly, I have to revert the change at version #4
> > > and use devm_device_add_groups() again. Sorry, I didn't catch this problem
> > > early.
> > >
> > > I did some debug & below are captured log, you can see priv pointer get
> > > messed at current_image_show(). I am not sure if something related to
> > > platform driver work properly. I attach my debug patch in this mail.
> > >
> > > 1. Using .groups = rsu_groups,
> > >
> > > [ 1.191115] *** rsu_status_callback:
> > > [ 1.194782] res->a1=2000000
> > > [ 1.197588] res->a1=0
> > > [ 1.199865] res->a2=0
> > > [ 1.202150] res->a3=0
> > > [ 1.204433] priv=0xffff80007aa28e80
> > > [ 1.207933] version=0, state=0, current_image=2000000, fail_image=0,
> > > error_location=0, error_details=0
> > > [ 1.217249] *** stratix10_rsu_probe: priv=0xffff80007aa28e80
> > > root@stratix10:/sys/bus/platform/drivers/stratix10-rsu# cat current_image
> > > [ 38.849341] *** current_image_show: priv=0xffff80007aa28d00
> > > ... output garbage data
> > > priv pointer got changed
> >
> > I don't understand this, sorry. Are you sure you are actually using the
> > correct pointer to your device?
> >
> I think so.
>
> The dev pointer at current_image_show() should points to RSU device, but it
> seems point to driver_private if I use .group = rsU_groups. As a result I
> can't get the priv pointer properly at current_image_show().

It points to the driver kobject, not the device kobject. So that's the
issue here. See the patch that I just posted for a potential fix for
this.

thanks,

greg k-h

\
 
 \ /
  Last update: 2019-06-04 16:29    [W:0.399 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site