lkml.org 
[lkml]   [2019]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/6] regulator: lm363x: Make the gpio register enable flexible
Date
The use of and enablement of the GPIO can be used across devices.
Use the enable_reg in the regulator descriptor for the register to
write.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
---

v5 - No changes to the patch changes requested in this patch were done in
patch 4 of this series - https://lore.kernel.org/patchwork/patch/1077408/

drivers/regulator/lm363x-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index e02fdd1dd092..1b5d7d2f26b8 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)

if (gpiod) {
cfg.ena_gpiod = gpiod;
-
- ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
+ ret = regmap_update_bits(regmap,
+ lm363x_regulator_desc[id].enable_reg,
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
--
2.21.0.5.gaeb582a983
\
 
 \ /
  Last update: 2019-06-04 19:45    [W:0.091 / U:12.800 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site