lkml.org 
[lkml]   [2019]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Input: edt-ft5x06 - use get_unaligned_be16()
Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote on Sat [2019-Jun-22 23:31:52 -0700]:
> Instead of doing conversion by hand, let's use the proper accessors.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/edt-ft5x06.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index c639ebce914c..ec770226e119 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -27,6 +27,7 @@
> #include <linux/gpio/consumer.h>
> #include <linux/input/mt.h>
> #include <linux/input/touchscreen.h>
> +#include <asm/unaligned.h>
>
> #define WORK_REGISTER_THRESHOLD 0x00
> #define WORK_REGISTER_REPORT_RATE 0x08
> @@ -239,8 +240,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
> if (tsdata->version == EDT_M06 && type == TOUCH_EVENT_DOWN)
> continue;
>
> - x = ((buf[0] << 8) | buf[1]) & 0x0fff;
> - y = ((buf[2] << 8) | buf[3]) & 0x0fff;
> + x = get_unaligned_be16(buf) & 0x0fff;
> + y = get_unaligned_be16(buf + 2) & 0x0fff;

Appears to work fine in my test:

Tested-by: Benoit Parrot <bparrot@ti.com>

> /* The FT5x26 send the y coordinate first */
> if (tsdata->version == EV_FT)
> swap(x, y);
> --
> 2.22.0.410.gd8fdbe21b5-goog
>

\
 
 \ /
  Last update: 2019-06-28 19:35    [W:0.122 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site