lkml.org 
[lkml]   [2019]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 02/10] crypto: sa2ul: Add crypto driver
Date
The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
requiring DRM (digital rights management) and
content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2_UL supports the following cryptographic industry standards to enable data authentication, data
integrity and data confidentiality.

Crypto function library for software acceleration
o AES operation
o 3DES operation
o SHA1 operation
o MD5 operation
o SHA2 – 224, 256, 384, 512 operation

Authentication supported via following hardware cores
o SHA1
o MD5
o SHA2 -224
o SHA2-256
o SHA2-384
o SHA2-512

Patch adds a basic crypto driver and currently supports AES
in cbc mode for both encryption and decryption.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/crypto/Kconfig | 17 +
drivers/crypto/Makefile | 1 +
drivers/crypto/sa2ul.c | 1151 +++++++++++++++++++++++++++++++++++++++
drivers/crypto/sa2ul.h | 384 +++++++++++++
4 files changed, 1553 insertions(+)
create mode 100644 drivers/crypto/sa2ul.c
create mode 100644 drivers/crypto/sa2ul.h

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 603413f28fa3..b9a3fa026c74 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -785,4 +785,21 @@ config CRYPTO_DEV_CCREE

source "drivers/crypto/hisilicon/Kconfig"

+config CRYPTO_DEV_SA2UL
+ tristate "Support for TI security accelerator"
+ depends on ARCH_K3 || COMPILE_TEST
+ select ARM64_CRYPTO
+ select CRYPTO_AES
+ select CRYPTO_AES_ARM64
+ select CRYPTO_SHA1
+ select CRYPTO_MD5
+ select CRYPTO_ALGAPI
+ select CRYPTO_AUTHENC
+ select HW_RANDOM
+ default m if ARCH_K3
+ help
+ Keystone devices include a security accelerator engine that may be
+ used for crypto offload. Select this if you want to use hardware
+ acceleration for cryptographic algorithms on these devices.
+
endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index afc4753b5d28..300d31fd24db 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -47,4 +47,5 @@ obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
obj-$(CONFIG_CRYPTO_DEV_SAFEXCEL) += inside-secure/
obj-$(CONFIG_CRYPTO_DEV_ARTPEC6) += axis/
+obj-$(CONFIG_CRYPTO_DEV_SA2UL) += sa2ul.o
obj-y += hisilicon/
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
new file mode 100644
index 000000000000..64bdf6b2b879
--- /dev/null
+++ b/drivers/crypto/sa2ul.c
@@ -0,0 +1,1151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM6 SA2UL crypto accelerator driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Keerthy
+ * Vitaly Andrianov
+ */
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/dmapool.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dmaengine.h>
+#include <linux/cryptohash.h>
+#include <linux/mod_devicetable.h>
+
+#include <crypto/authenc.h>
+#include <crypto/des.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/internal/hash.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/sha.h>
+
+#include "sa2ul.h"
+
+/* Byte offset for key in encryption security context */
+#define SC_ENC_KEY_OFFSET (1 + 27 + 4)
+/* Byte offset for Aux-1 in encryption security context */
+#define SC_ENC_AUX1_OFFSET (1 + 27 + 4 + 32)
+
+#define SA_CMDL_UPD_ENC 0x0001
+#define SA_CMDL_UPD_AUTH 0x0002
+#define SA_CMDL_UPD_ENC_IV 0x0004
+#define SA_CMDL_UPD_AUTH_IV 0x0008
+#define SA_CMDL_UPD_AUX_KEY 0x0010
+
+#define SA_AUTH_SUBKEY_LEN 16
+#define SA_CMDL_PAYLOAD_LENGTH_MASK 0xFFFF
+#define SA_CMDL_SOP_BYPASS_LEN_MASK 0xFF000000
+
+#define MODE_CONTROL_BYTES 27
+#define SA_HASH_PROCESSING 0
+#define SA_CRYPTO_PROCESSING 0
+#define SA_UPLOAD_HASH_TO_TLR BIT(6)
+
+#define SA_SW0_FLAGS_MASK 0xF0000
+#define SA_SW0_CMDL_INFO_MASK 0x1F00000
+#define SA_SW0_CMDL_PRESENT BIT(4)
+#define SA_SW0_ENG_ID_MASK 0x3E000000
+#define SA_SW0_DEST_INFO_PRESENT BIT(30)
+#define SA_SW2_EGRESS_LENGTH 0xFF000000
+
+#define SHA256_DIGEST_WORDS 8
+/* Make 32-bit word from 4 bytes */
+#define SA_MK_U32(b0, b1, b2, b3) (((b0) << 24) | ((b1) << 16) | \
+ ((b2) << 8) | (b3))
+
+/* size of SCCTL structure in bytes */
+#define SA_SCCTL_SZ 16
+
+/* Max Authentication tag size */
+#define SA_MAX_AUTH_TAG_SZ 64
+
+#define PRIV_ID 0x1
+#define PRIV 0x1
+
+static struct device *sa_k3_dev;
+
+/**
+ * struct sa_cmdl_cfg - Command label configuration descriptor
+ * @enc1st: If the iteration needs encryption before authentication
+ * @aalg: authentication algorithm ID
+ * @enc_eng_id: Encryption Engine ID supported by the SA hardware
+ * @auth_eng_id: authentication Engine ID
+ * @iv_size: Initialization Vector size
+ * @akey: Authentication key
+ * @akey_len: Authentication key length
+ */
+struct sa_cmdl_cfg {
+ int enc1st;
+ int aalg;
+ u8 enc_eng_id;
+ u8 auth_eng_id;
+ u8 iv_size;
+ const u8 *akey;
+ u16 akey_len;
+ u16 auth_subkey_len;
+};
+
+/**
+ * struct algo_data - Crypto algorithm specific data
+ * @enc_eng: Encryption engine info structure
+ * @auth_eng: Authentication engine info structure
+ * @auth_ctrl: Authentication control word
+ * @hash_size: Size of Digest
+ * @ealg_id: Encryption Algorithm ID
+ * @aalg_id: Authentication algorithm ID
+ * @mci_enc: Mode Control Instruction for Encryption algorithm
+ * @mci_dec: Mode Control Instruction for Decryption
+ * @inv_key: Whether the encryption algorithm demands key inversion
+ * @keyed_mac: Whether the Authentication algorithm has Key
+ * @prep_iopad: Function pointer to generate intermediate ipad/opad
+ */
+struct algo_data {
+ struct sa_eng_info enc_eng;
+ struct sa_eng_info auth_eng;
+ u8 auth_ctrl;
+ u8 hash_size;
+ u8 ealg_id;
+ u8 aalg_id;
+ u8 *mci_enc;
+ u8 *mci_dec;
+ bool inv_key;
+ bool keyed_mac;
+ void (*prep_iopad)(const u8 *key, u16 key_sz, u32 *ipad, u32 *opad);
+};
+
+/**
+ * struct sa_alg_tmpl: A generic template encompassing crypto/aead algorithms
+ * @alg: A union of aead/crypto algorithm type.
+ * @registered: Flag indicating if the crypto algorithm is already registered
+ */
+struct sa_alg_tmpl {
+ u32 type; /* CRYPTO_ALG_TYPE from <linux/crypto.h> */
+ union {
+ struct crypto_alg crypto;
+ struct aead_alg aead;
+ } alg;
+ int registered;
+};
+
+/**
+ * struct sa_rx_data: RX Packet miscellaneous data place holder
+ * @req: crypto request data pointer
+ * @ddev: DMA device pointer
+ * @tx_in: dma_async_tx_descriptor pointer for rx channel
+ * @enc: Flag indicating either encryption or decryption
+ */
+struct sa_rx_data {
+ void *req;
+ struct device *ddev;
+ struct dma_async_tx_descriptor *tx_in;
+ u8 enc;
+};
+
+/*
+ * Mode Control Instructions for various Key lengths 128, 192, 256
+ * For CBC (Cipher Block Chaining) mode for encryption
+ */
+static u8 mci_cbc_enc_array[3][MODE_CONTROL_BYTES] = {
+ { 0x21, 0x00, 0x00, 0x18, 0x88, 0x0a, 0xaa, 0x4b, 0x7e, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ { 0x21, 0x00, 0x00, 0x18, 0x88, 0x4a, 0xaa, 0x4b, 0x7e, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ { 0x21, 0x00, 0x00, 0x18, 0x88, 0x8a, 0xaa, 0x4b, 0x7e, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+};
+
+/*
+ * Mode Control Instructions for various Key lengths 128, 192, 256
+ * For CBC (Cipher Block Chaining) mode for decryption
+ */
+static u8 mci_cbc_dec_array[3][MODE_CONTROL_BYTES] = {
+ { 0x31, 0x00, 0x00, 0x80, 0x8a, 0xca, 0x98, 0xf4, 0x40, 0xc0,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ { 0x31, 0x00, 0x00, 0x84, 0x8a, 0xca, 0x98, 0xf4, 0x40, 0xc0,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ { 0x31, 0x00, 0x00, 0x88, 0x8a, 0xca, 0x98, 0xf4, 0x40, 0xc0,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+};
+
+/*
+ * Perform 16 byte or 128 bit swizzling
+ * The SA2UL Expects the security context to
+ * be in little Endian and the bus width is 128 bits or 16 bytes
+ * Hence swap 16 bytes at a time from higher to lower address
+ */
+static void sa_swiz_128(u8 *in, u16 len)
+{
+ u8 data[16];
+ int i, j;
+
+ for (i = 0; i < len; i += 16) {
+ memcpy(data, &in[i], 16);
+ for (j = 0; j < 16; j++)
+ in[i + j] = data[15 - j];
+ }
+}
+
+/* Derive the inverse key used in AES-CBC decryption operation */
+static inline int sa_aes_inv_key(u8 *inv_key, const u8 *key, u16 key_sz)
+{
+ struct crypto_aes_ctx ctx;
+ int key_pos;
+
+ if (crypto_aes_expand_key(&ctx, key, key_sz)) {
+ pr_err("%s: bad key len(%d)\n", __func__, key_sz);
+ return -EINVAL;
+ }
+
+ /* Based crypto_aes_expand_key logic */
+ switch (key_sz) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_192:
+ key_pos = key_sz + 24;
+ break;
+
+ case AES_KEYSIZE_256:
+ key_pos = key_sz + 24 - 4;
+ break;
+
+ default:
+ pr_err("%s: bad key len(%d)\n", __func__, key_sz);
+ return -EINVAL;
+ }
+
+ memcpy(inv_key, &ctx.key_enc[key_pos], key_sz);
+ return 0;
+}
+
+/* Set Security context for the encryption engine */
+static int sa_set_sc_enc(struct algo_data *ad, const u8 *key, u16 key_sz,
+ u16 aad_len, u8 enc, u8 *sc_buf)
+{
+ const u8 *mci = NULL;
+
+ /* Set Encryption mode selector to crypto processing */
+ sc_buf[0] = SA_CRYPTO_PROCESSING;
+
+ if (enc)
+ mci = ad->mci_enc;
+ else
+ mci = ad->mci_dec;
+ /* Set the mode control instructions in security context */
+ if (mci)
+ memcpy(&sc_buf[1], mci, MODE_CONTROL_BYTES);
+
+ /* For AES-CBC decryption get the inverse key */
+ if (ad->inv_key && !enc) {
+ if (sa_aes_inv_key(&sc_buf[SC_ENC_KEY_OFFSET], key, key_sz))
+ return -EINVAL;
+ /* For all other cases: key is used */
+ } else {
+ memcpy(&sc_buf[SC_ENC_KEY_OFFSET], key, key_sz);
+ }
+
+ return 0;
+}
+
+/* Set Security context for the authentication engine */
+static void sa_set_sc_auth(struct algo_data *ad, const u8 *key, u16 key_sz,
+ u8 *sc_buf)
+{
+ u32 ipad[64], opad[64];
+
+ /* Set Authentication mode selector to hash processing */
+ sc_buf[0] = SA_HASH_PROCESSING;
+ /* Auth SW ctrl word: bit[6]=1 (upload computed hash to TLR section) */
+ sc_buf[1] = SA_UPLOAD_HASH_TO_TLR;
+ sc_buf[1] |= ad->auth_ctrl;
+
+ /* Copy the keys or ipad/opad */
+ if (ad->keyed_mac) {
+ ad->prep_iopad(key, key_sz, ipad, opad);
+ /* Copy ipad to AuthKey */
+ memcpy(&sc_buf[32], ipad, ad->hash_size);
+ /* Copy opad to Aux-1 */
+ memcpy(&sc_buf[64], opad, ad->hash_size);
+ }
+}
+
+static inline void sa_copy_iv(u32 *out, const u8 *iv, bool size16)
+{
+ int j;
+
+ for (j = 0; j < ((size16) ? 4 : 2); j++) {
+ *out = cpu_to_be32(*((u32 *)iv));
+ iv += 4;
+ out++;
+ }
+}
+
+/* Format general command label */
+static int sa_format_cmdl_gen(struct sa_cmdl_cfg *cfg, u8 *cmdl,
+ struct sa_cmdl_upd_info *upd_info)
+{
+ u8 enc_offset = 0, auth_offset = 0, total = 0;
+ u8 enc_next_eng = SA_ENG_ID_OUTPORT2;
+ u8 auth_next_eng = SA_ENG_ID_OUTPORT2;
+ u32 *word_ptr = (u32 *)cmdl;
+ int i;
+
+ /* Clear the command label */
+ memzero_explicit(cmdl, (SA_MAX_CMDL_WORDS * sizeof(u32)));
+
+ /* Iniialize the command update structure */
+ memzero_explicit(upd_info, sizeof(*upd_info));
+
+ if (cfg->enc1st) {
+ if (cfg->enc_eng_id != SA_ENG_ID_NONE)
+ auth_offset = SA_CMDL_HEADER_SIZE_BYTES;
+
+ if (cfg->iv_size)
+ auth_offset += cfg->iv_size;
+
+ if (cfg->auth_eng_id != SA_ENG_ID_NONE)
+ enc_next_eng = cfg->auth_eng_id;
+ else
+ enc_next_eng = SA_ENG_ID_OUTPORT2;
+ } else {
+ if (cfg->auth_eng_id != SA_ENG_ID_NONE)
+ enc_offset = SA_CMDL_HEADER_SIZE_BYTES;
+
+ if (cfg->auth_subkey_len)
+ enc_offset += cfg->auth_subkey_len;
+
+ if (cfg->enc_eng_id != SA_ENG_ID_NONE)
+ auth_next_eng = cfg->enc_eng_id;
+ else
+ auth_next_eng = SA_ENG_ID_OUTPORT2;
+ }
+
+ if (cfg->enc_eng_id != SA_ENG_ID_NONE) {
+ upd_info->flags |= SA_CMDL_UPD_ENC;
+ upd_info->enc_size.index = enc_offset >> 2;
+ upd_info->enc_offset.index = upd_info->enc_size.index + 1;
+ /* Encryption command label */
+ cmdl[enc_offset + SA_CMDL_OFFSET_NESC] = enc_next_eng;
+
+ /* Encryption modes requiring IV */
+ if (cfg->iv_size) {
+ upd_info->flags |= SA_CMDL_UPD_ENC_IV;
+ upd_info->enc_iv.index =
+ (enc_offset + SA_CMDL_HEADER_SIZE_BYTES) >> 2;
+ upd_info->enc_iv.size = cfg->iv_size;
+
+ cmdl[enc_offset + SA_CMDL_OFFSET_LABEL_LEN] =
+ SA_CMDL_HEADER_SIZE_BYTES + cfg->iv_size;
+
+ cmdl[enc_offset + SA_CMDL_OFFSET_OPTION_CTRL1] =
+ (SA_CTX_ENC_AUX2_OFFSET | (cfg->iv_size >> 3));
+ enc_offset += SA_CMDL_HEADER_SIZE_BYTES + cfg->iv_size;
+ } else {
+ cmdl[enc_offset + SA_CMDL_OFFSET_LABEL_LEN] =
+ SA_CMDL_HEADER_SIZE_BYTES;
+ enc_offset += SA_CMDL_HEADER_SIZE_BYTES;
+ }
+ }
+
+ if (cfg->auth_eng_id != SA_ENG_ID_NONE) {
+ upd_info->flags |= SA_CMDL_UPD_AUTH;
+ upd_info->auth_size.index = auth_offset >> 2;
+ upd_info->auth_offset.index = upd_info->auth_size.index + 1;
+ cmdl[auth_offset + SA_CMDL_OFFSET_NESC] = auth_next_eng;
+
+ /* Algorithm with subkeys */
+ if (cfg->aalg == SA_AALG_ID_AES_XCBC ||
+ cfg->aalg == SA_AALG_ID_CMAC) {
+ upd_info->flags |= SA_CMDL_UPD_AUX_KEY;
+ upd_info->aux_key_info.index =
+ (auth_offset + SA_CMDL_HEADER_SIZE_BYTES) >> 2;
+ cmdl[auth_offset + SA_CMDL_OFFSET_LABEL_LEN] =
+ SA_CMDL_HEADER_SIZE_BYTES +
+ cfg->auth_subkey_len;
+ cmdl[auth_offset + SA_CMDL_OFFSET_OPTION_CTRL1] =
+ (SA_CTX_ENC_AUX1_OFFSET |
+ (cfg->auth_subkey_len >> 3));
+
+ auth_offset += SA_CMDL_HEADER_SIZE_BYTES +
+ cfg->auth_subkey_len;
+ } else {
+ cmdl[auth_offset + SA_CMDL_OFFSET_LABEL_LEN] =
+ SA_CMDL_HEADER_SIZE_BYTES;
+ auth_offset += SA_CMDL_HEADER_SIZE_BYTES;
+ }
+ }
+
+ if (cfg->enc1st)
+ total = auth_offset;
+ else
+ total = enc_offset;
+
+ total = roundup(total, 8);
+
+ for (i = 0; i < total / 4; i++)
+ word_ptr[i] = be32_to_cpu(word_ptr[i]);
+
+ return total;
+}
+
+/* Update Command label */
+static inline void
+sa_update_cmdl(struct device *dev, u8 enc_offset, u16 enc_size, u8 *enc_iv,
+ u8 auth_offset, u16 auth_size, u8 *auth_iv, u8 aad_size,
+ u8 *aad, struct sa_cmdl_upd_info *upd_info, u32 *cmdl)
+{
+ int i = 0, j;
+
+ if (upd_info->submode != SA_MODE_GEN) {
+ dev_err(dev, "unsupported mode(%d)\n", upd_info->submode);
+ return;
+ }
+
+ if (likely(upd_info->flags & SA_CMDL_UPD_ENC)) {
+ cmdl[upd_info->enc_size.index] &= ~SA_CMDL_PAYLOAD_LENGTH_MASK;
+ cmdl[upd_info->enc_size.index] |= enc_size;
+ cmdl[upd_info->enc_offset.index] &=
+ ~SA_CMDL_SOP_BYPASS_LEN_MASK;
+ cmdl[upd_info->enc_offset.index] |=
+ ((u32)enc_offset << __ffs(SA_CMDL_SOP_BYPASS_LEN_MASK));
+
+ if (likely(upd_info->flags & SA_CMDL_UPD_ENC_IV)) {
+ u32 *data = &cmdl[upd_info->enc_iv.index];
+
+ for (j = 0; i < upd_info->enc_iv.size; i += 4, j++) {
+ data[j] = cpu_to_be32(*((u32 *)enc_iv));
+ enc_iv += 4;
+ }
+ }
+ }
+
+ if (likely(upd_info->flags & SA_CMDL_UPD_AUTH)) {
+ cmdl[upd_info->auth_size.index] &= ~SA_CMDL_PAYLOAD_LENGTH_MASK;
+ cmdl[upd_info->auth_size.index] |= auth_size;
+ cmdl[upd_info->auth_offset.index] &=
+ ~SA_CMDL_SOP_BYPASS_LEN_MASK;
+ cmdl[upd_info->auth_offset.index] |= ((u32)auth_offset <<
+ __ffs(SA_CMDL_SOP_BYPASS_LEN_MASK));
+ if (upd_info->flags & SA_CMDL_UPD_AUTH_IV) {
+ sa_copy_iv(&cmdl[upd_info->auth_iv.index], auth_iv,
+ (upd_info->auth_iv.size > 8));
+ }
+
+ if (upd_info->flags & SA_CMDL_UPD_AUX_KEY) {
+ int offset = (auth_size & 0xF) ? 4 : 0;
+
+ memcpy(&cmdl[upd_info->aux_key_info.index],
+ &upd_info->aux_key[offset], 16);
+ }
+ }
+}
+
+/* Format SWINFO words to be sent to SA */
+static
+void sa_set_swinfo(u8 eng_id, u16 sc_id, dma_addr_t sc_phys,
+ u8 cmdl_present, u8 cmdl_offset, u8 flags,
+ u8 hash_size, u32 *swinfo)
+{
+ swinfo[0] = sc_id;
+ swinfo[0] |= (flags << __ffs(SA_SW0_FLAGS_MASK));
+ if (likely(cmdl_present))
+ swinfo[0] |= ((cmdl_offset | SA_SW0_CMDL_PRESENT) <<
+ __ffs(SA_SW0_CMDL_INFO_MASK));
+ swinfo[0] |= (eng_id << __ffs(SA_SW0_ENG_ID_MASK));
+
+ swinfo[0] |= SA_SW0_DEST_INFO_PRESENT;
+ swinfo[1] = (u32)(sc_phys & 0xFFFFFFFFULL);
+ swinfo[2] = (u32)((sc_phys & 0xFFFFFFFF00000000ULL) >> 32);
+ swinfo[2] |= (hash_size << __ffs(SA_SW2_EGRESS_LENGTH));
+}
+
+/* Dump the security context */
+static void sa_dump_sc(u8 *buf, dma_addr_t dma_addr)
+{
+#ifdef DEBUG
+ dev_info(sa_k3_dev, "Security context dump:: 0x%pad\n", &dma_addr);
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET,
+ 16, 1, buf, SA_CTX_MAX_SZ, false);
+#endif
+}
+
+static
+int sa_init_sc(struct sa_ctx_info *ctx, const u8 *enc_key,
+ u16 enc_key_sz, const u8 *auth_key, u16 auth_key_sz,
+ struct algo_data *ad, u8 enc, u32 *swinfo, bool auth_req)
+{
+ int use_enc = 0;
+ int enc_sc_offset, auth_sc_offset;
+ u8 *sc_buf = ctx->sc;
+ u16 sc_id = ctx->sc_id;
+ u16 aad_len = 0; /* Currently not supporting AEAD algo */
+ u8 first_engine;
+
+ memzero_explicit(sc_buf, SA_CTX_MAX_SZ);
+
+ if (ad->auth_eng.eng_id <= SA_ENG_ID_EM2 || !auth_req)
+ use_enc = 1;
+
+ /* Determine the order of encryption & Authentication contexts */
+ if (enc || !use_enc) {
+ if (auth_req) {
+ enc_sc_offset = SA_CTX_PHP_PE_CTX_SZ;
+ auth_sc_offset = enc_sc_offset + ad->enc_eng.sc_size;
+ } else {
+ enc_sc_offset = SA_CTX_PHP_PE_CTX_SZ;
+ }
+ } else {
+ auth_sc_offset = SA_CTX_PHP_PE_CTX_SZ;
+ enc_sc_offset = auth_sc_offset + ad->auth_eng.sc_size;
+ }
+
+ /* SCCTL Owner info: 0=host, 1=CP_ACE */
+ sc_buf[SA_CTX_SCCTL_OWNER_OFFSET] = 0;
+ /* SCCTL F/E control */
+ if (auth_req)
+ sc_buf[1] = SA_SCCTL_FE_AUTH_ENC;
+ else
+ sc_buf[1] = SA_SCCTL_FE_ENC;
+ memcpy(&sc_buf[2], &sc_id, 2);
+ sc_buf[4] = 0x0;
+ sc_buf[5] = PRIV_ID;
+ sc_buf[6] = PRIV;
+ sc_buf[7] = 0x0;
+
+ /* Initialize the rest of PHP context */
+ memzero_explicit(sc_buf + SA_SCCTL_SZ, SA_CTX_PHP_PE_CTX_SZ -
+ SA_SCCTL_SZ);
+
+ /* Prepare context for encryption engine */
+ if (ad->enc_eng.sc_size) {
+ if (sa_set_sc_enc(ad, enc_key, enc_key_sz, aad_len,
+ enc, &sc_buf[enc_sc_offset]))
+ return -EINVAL;
+ }
+
+ /* Prepare context for authentication engine */
+ if (ad->auth_eng.sc_size) {
+ if (use_enc) {
+ if (sa_set_sc_enc(ad, auth_key, auth_key_sz,
+ aad_len, 0, &sc_buf[auth_sc_offset]))
+ return -EINVAL;
+ } else {
+ sa_set_sc_auth(ad, auth_key, auth_key_sz,
+ &sc_buf[auth_sc_offset]);
+ }
+ }
+
+ /* Set the ownership of context to CP_ACE */
+ sc_buf[SA_CTX_SCCTL_OWNER_OFFSET] = 0x80;
+
+ /* swizzle the security context */
+ sa_swiz_128(sc_buf, SA_CTX_MAX_SZ);
+ /* Setup SWINFO */
+ if (!auth_req)
+ first_engine = ad->enc_eng.eng_id;
+ else
+ first_engine = enc ? ad->enc_eng.eng_id : ad->auth_eng.eng_id;
+
+ if (auth_req) {
+ if (!ad->hash_size)
+ return -EINVAL;
+ /* Round up the tag size to multiple of 4 */
+ ad->hash_size = roundup(ad->hash_size, 8);
+ }
+
+ sa_set_swinfo(first_engine, ctx->sc_id, ctx->sc_phys, 1, 0,
+ SA_SW_INFO_FLAG_EVICT, ad->hash_size, swinfo);
+
+ sa_dump_sc(sc_buf, ctx->sc_phys);
+
+ return 0;
+}
+
+/* Free the per direction context memory */
+static void sa_free_ctx_info(struct sa_ctx_info *ctx,
+ struct sa_crypto_data *data)
+{
+ unsigned long bn;
+
+ bn = ctx->sc_id - data->sc_id_start;
+ spin_lock(&data->scid_lock);
+ __clear_bit(bn, data->ctx_bm);
+ data->sc_id--;
+ spin_unlock(&data->scid_lock);
+
+ if (ctx->sc) {
+ dma_pool_free(data->sc_pool, ctx->sc, ctx->sc_phys);
+ ctx->sc = NULL;
+ }
+}
+
+static int sa_init_ctx_info(struct sa_ctx_info *ctx,
+ struct sa_crypto_data *data)
+{
+ unsigned long bn;
+ int err;
+
+ spin_lock(&data->scid_lock);
+ bn = find_first_zero_bit(data->ctx_bm, SA_MAX_NUM_CTX);
+ __set_bit(bn, data->ctx_bm);
+ data->sc_id++;
+ spin_unlock(&data->scid_lock);
+
+ ctx->sc_id = (u16)(data->sc_id_start + bn);
+
+ ctx->sc = dma_pool_alloc(data->sc_pool, GFP_KERNEL, &ctx->sc_phys);
+ if (!ctx->sc) {
+ dev_err(&data->pdev->dev, "Failed to allocate SC memory\n");
+ err = -ENOMEM;
+ goto scid_rollback;
+ }
+
+ return 0;
+
+scid_rollback:
+ spin_lock(&data->scid_lock);
+ __clear_bit(bn, data->ctx_bm);
+ data->sc_id--;
+ spin_unlock(&data->scid_lock);
+
+ return err;
+}
+
+static void sa_aes_cra_exit(struct crypto_tfm *tfm)
+{
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct sa_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct sa_crypto_data *data = dev_get_drvdata(sa_k3_dev);
+
+ dev_dbg(sa_k3_dev, "%s(0x%p) sc-ids(0x%x(0x%pad), 0x%x(0x%pad))\n",
+ __func__, tfm, ctx->enc.sc_id, &ctx->enc.sc_phys,
+ ctx->dec.sc_id, &ctx->dec.sc_phys);
+
+ if ((alg->cra_flags & CRYPTO_ALG_TYPE_ABLKCIPHER)
+ == CRYPTO_ALG_TYPE_ABLKCIPHER) {
+ sa_free_ctx_info(&ctx->enc, data);
+ sa_free_ctx_info(&ctx->dec, data);
+ }
+}
+
+static int sa_aes_cra_init(struct crypto_tfm *tfm)
+{
+ struct sa_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct sa_crypto_data *data = dev_get_drvdata(sa_k3_dev);
+ int ret;
+
+ if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
+ CRYPTO_ALG_TYPE_ABLKCIPHER) {
+ memzero_explicit(ctx, sizeof(*ctx));
+ ctx->dev_data = data;
+
+ ret = sa_init_ctx_info(&ctx->enc, data);
+ if (ret)
+ return ret;
+ ret = sa_init_ctx_info(&ctx->dec, data);
+ if (ret) {
+ sa_free_ctx_info(&ctx->enc, data);
+ return ret;
+ }
+ }
+
+ dev_dbg(sa_k3_dev, "%s(0x%p) sc-ids(0x%x(0x%pad), 0x%x(0x%pad))\n",
+ __func__, tfm, ctx->enc.sc_id, &ctx->enc.sc_phys,
+ ctx->dec.sc_id, &ctx->dec.sc_phys);
+ return 0;
+}
+
+static int sa_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen, struct algo_data *ad)
+{
+ struct sa_tfm_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+ const char *cra_name;
+ int cmdl_len;
+ struct sa_cmdl_cfg cfg;
+
+ if (keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_192 &&
+ keylen != AES_KEYSIZE_256)
+ return -EINVAL;
+
+ cra_name = crypto_tfm_alg_name(&tfm->base);
+
+ memzero_explicit(&cfg, sizeof(cfg));
+ cfg.enc1st = 1;
+ cfg.enc_eng_id = ad->enc_eng.eng_id;
+ cfg.iv_size = crypto_ablkcipher_ivsize(tfm);
+ cfg.auth_eng_id = SA_ENG_ID_NONE;
+ cfg.auth_subkey_len = 0;
+
+ /* Setup Encryption Security Context & Command label template */
+ if (sa_init_sc(&ctx->enc, key, keylen,
+ NULL, 0, ad, 1, &ctx->enc.epib[1], false))
+ goto badkey;
+
+ cmdl_len = sa_format_cmdl_gen(&cfg,
+ (u8 *)ctx->enc.cmdl,
+ &ctx->enc.cmdl_upd_info);
+ if (cmdl_len <= 0 || (cmdl_len > SA_MAX_CMDL_WORDS * sizeof(u32)))
+ goto badkey;
+
+ ctx->enc.cmdl_size = cmdl_len;
+
+ /* Setup Decryption Security Context & Command label template */
+ if (sa_init_sc(&ctx->dec, key, keylen,
+ NULL, 0, ad, 0, &ctx->dec.epib[1], false))
+ goto badkey;
+
+ cfg.enc1st = 0;
+ cfg.enc_eng_id = ad->enc_eng.eng_id;
+ cfg.auth_eng_id = SA_ENG_ID_NONE;
+ cfg.auth_subkey_len = 0;
+ cmdl_len = sa_format_cmdl_gen(&cfg, (u8 *)ctx->dec.cmdl,
+ &ctx->dec.cmdl_upd_info);
+
+ if (cmdl_len <= 0 || (cmdl_len > SA_MAX_CMDL_WORDS * sizeof(u32)))
+ goto badkey;
+
+ ctx->dec.cmdl_size = cmdl_len;
+
+ kfree(ad);
+
+ return 0;
+
+badkey:
+ dev_err(sa_k3_dev, "%s: badkey\n", __func__);
+ return -EINVAL;
+}
+
+static int sa_aes_cbc_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct algo_data *ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+ /* Convert the key size (16/24/32) to the key size index (0/1/2) */
+ int key_idx = (keylen >> 3) - 2;
+
+ ad->enc_eng.eng_id = SA_ENG_ID_EM1;
+ ad->enc_eng.sc_size = SA_CTX_ENC_TYPE1_SZ;
+ ad->auth_eng.eng_id = SA_ENG_ID_NONE;
+ ad->auth_eng.sc_size = 0;
+ ad->mci_enc = mci_cbc_enc_array[key_idx];
+ ad->mci_dec = mci_cbc_dec_array[key_idx];
+ ad->inv_key = true;
+ ad->ealg_id = SA_EALG_ID_AES_CBC;
+ ad->aalg_id = SA_AALG_ID_NONE;
+
+ return sa_aes_setkey(tfm, key, keylen, ad);
+}
+
+static void sa_aes_dma_in_callback(void *data)
+{
+ struct sa_rx_data *rxd = (struct sa_rx_data *)data;
+ struct ablkcipher_request *req = (struct ablkcipher_request *)rxd->req;
+
+ int sglen = sg_nents_for_len(req->dst, req->nbytes);
+
+ kfree(rxd);
+
+ dma_unmap_sg(sa_k3_dev, req->src, sglen, DMA_TO_DEVICE);
+ if (req->src != req->dst)
+ dma_unmap_sg(rxd->ddev, req->dst, sglen, DMA_FROM_DEVICE);
+
+ ablkcipher_request_complete(req, 0);
+}
+
+static void
+sa_prepare_tx_desc(u32 *mdptr, u32 pslen, u32 *psdata, u32 epiblen, u32 *epib)
+{
+ u32 *out, *in;
+ int i;
+
+ for (out = mdptr, in = epib, i = 0; i < epiblen / sizeof(u32); i++)
+ *out++ = *in++;
+
+ mdptr[4] = (0xFFFF << 16);
+ for (out = &mdptr[5], in = psdata, i = 0;
+ i < pslen / sizeof(u32); i++)
+ *out++ = *in++;
+}
+
+static int sa_aes_run(struct ablkcipher_request *req, u8 *iv, int enc)
+{
+ struct sa_tfm_ctx *ctx =
+ crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req));
+ struct sa_ctx_info *sa_ctx = enc ? &ctx->enc : &ctx->dec;
+ struct sa_crypto_data *pdata = dev_get_drvdata(sa_k3_dev);
+ struct sa_dma_req_ctx req_ctx;
+ struct dma_async_tx_descriptor *tx_in, *tx_out;
+ struct sa_rx_data *rxd;
+ u8 enc_offset;
+ int sg_nents, dst_nents;
+ int psdata_offset;
+ u8 auth_offset = 0;
+ u8 *auth_iv = NULL;
+ u8 *aad = NULL;
+ u8 aad_len = 0;
+ u16 enc_len;
+ u16 auth_len = 0;
+ u32 req_type;
+ u32 *mdptr;
+ size_t pl, ml;
+
+ struct device *ddev;
+ struct dma_chan *dma_rx;
+ gfp_t flags;
+
+ flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ?
+ GFP_KERNEL : GFP_ATOMIC;
+
+ enc_offset = 0x0;
+ enc_len = req->nbytes;
+
+ if (enc_len >= 256)
+ dma_rx = pdata->dma_rx2;
+ else
+ dma_rx = pdata->dma_rx1;
+
+ /* Allocate descriptor & submit packet */
+ sg_nents = sg_nents_for_len(req->src, enc_len);
+ dst_nents = sg_nents_for_len(req->dst, enc_len);
+
+ memcpy(req_ctx.cmdl, sa_ctx->cmdl, sa_ctx->cmdl_size);
+
+ /* Update Command Label */
+ sa_update_cmdl(sa_k3_dev, enc_offset, enc_len,
+ iv, auth_offset, auth_len,
+ auth_iv, aad_len, aad,
+ &sa_ctx->cmdl_upd_info, req_ctx.cmdl);
+
+ /*
+ * Last 2 words in PSDATA will have the crypto alg type &
+ * crypto request pointer
+ */
+ req_type = CRYPTO_ALG_TYPE_ABLKCIPHER;
+ if (enc)
+ req_type |= (SA_REQ_SUBTYPE_ENC << SA_REQ_SUBTYPE_SHIFT);
+ else
+ req_type |= (SA_REQ_SUBTYPE_DEC << SA_REQ_SUBTYPE_SHIFT);
+
+ psdata_offset = sa_ctx->cmdl_size / sizeof(u32);
+ req_ctx.cmdl[psdata_offset++] = req_type;
+
+ ddev = dma_rx->device->dev;
+ /* map the packet */
+ req_ctx.src = req->src;
+ req_ctx.src_nents = dma_map_sg(sa_k3_dev, req->src, sg_nents,
+ DMA_TO_DEVICE);
+ if (req->src != req->dst)
+ dst_nents = dma_map_sg(ddev, req->dst, sg_nents,
+ DMA_FROM_DEVICE);
+ else
+ dst_nents = req_ctx.src_nents;
+
+ if (unlikely(req_ctx.src_nents != sg_nents)) {
+ dev_warn_ratelimited(sa_k3_dev, "failed to map tx pkt\n");
+ return -EIO;
+ }
+
+ req_ctx.dev_data = pdata;
+ req_ctx.pkt = true;
+
+ dma_sync_sg_for_device(pdata->dev, req->src, req_ctx.src_nents,
+ DMA_TO_DEVICE);
+
+ tx_in = dmaengine_prep_slave_sg(dma_rx, req->dst, dst_nents,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx_in) {
+ dev_err(pdata->dev, "IN prep_slave_sg() failed\n");
+ return -EINVAL;
+ }
+
+ rxd = kzalloc(sizeof(*rxd), GFP_KERNEL);
+ rxd->req = (void *)req;
+ rxd->ddev = ddev;
+
+ /* IN */
+ tx_in->callback = sa_aes_dma_in_callback;
+ tx_in->callback_param = rxd;
+
+ tx_out = dmaengine_prep_slave_sg(pdata->dma_tx, req->src,
+ req_ctx.src_nents, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx_out) {
+ dev_err(pdata->dev, "OUT prep_slave_sg() failed\n");
+ return -EINVAL;
+ }
+
+ mdptr = (u32 *)dmaengine_desc_get_metadata_ptr(tx_out, &pl, &ml);
+
+ sa_prepare_tx_desc(mdptr, (sa_ctx->cmdl_size + (SA_PSDATA_CTX_WORDS *
+ sizeof(u32))), req_ctx.cmdl,
+ sizeof(sa_ctx->epib), sa_ctx->epib);
+
+ ml = sa_ctx->cmdl_size + (SA_PSDATA_CTX_WORDS * sizeof(u32));
+ dmaengine_desc_set_metadata_len(tx_out, 44);
+
+ dmaengine_submit(tx_out);
+ dmaengine_submit(tx_in);
+
+ dma_async_issue_pending(dma_rx);
+ dma_async_issue_pending(pdata->dma_tx);
+
+ return -EINPROGRESS;
+}
+
+static int sa_aes_cbc_encrypt(struct ablkcipher_request *req)
+{
+ return sa_aes_run(req, req->info, 1);
+}
+
+static int sa_aes_cbc_decrypt(struct ablkcipher_request *req)
+{
+ return sa_aes_run(req, req->info, 0);
+}
+
+static struct sa_alg_tmpl sa_algs[] = {
+ {.type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .alg.crypto = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-sa2ul",
+ .cra_priority = 30000,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sa_tfm_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = sa_aes_cra_init,
+ .cra_exit = sa_aes_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = sa_aes_cbc_setkey,
+ .encrypt = sa_aes_cbc_encrypt,
+ .decrypt = sa_aes_cbc_decrypt,
+ }
+ }
+ },
+};
+
+/* Register the algorithms in crypto framework */
+void sa_register_algos(const struct device *dev)
+{
+ char *alg_name;
+ u32 type;
+ int i, err, num_algs = ARRAY_SIZE(sa_algs);
+
+ for (i = 0; i < num_algs; i++) {
+ type = sa_algs[i].type;
+ if (type == CRYPTO_ALG_TYPE_AEAD) {
+ alg_name = sa_algs[i].alg.aead.base.cra_name;
+ err = crypto_register_aead(&sa_algs[i].alg.aead);
+ } else if (type == CRYPTO_ALG_TYPE_ABLKCIPHER) {
+ alg_name = sa_algs[i].alg.crypto.cra_name;
+ err = crypto_register_alg(&sa_algs[i].alg.crypto);
+ } else {
+ dev_err(dev,
+ "un-supported crypto algorithm (%d)",
+ sa_algs[i].type);
+ continue;
+ }
+
+ if (err)
+ dev_err(dev, "Failed to register '%s'\n", alg_name);
+ else
+ sa_algs[i].registered = 1;
+ }
+}
+
+/* Unregister the algorithms in crypto framework */
+void sa_unregister_algos(const struct device *dev)
+{
+ char *alg_name;
+ u32 type;
+ int i, err = 0, num_algs = ARRAY_SIZE(sa_algs);
+
+ for (i = 0; i < num_algs; i++) {
+ type = sa_algs[i].type;
+ if (type == CRYPTO_ALG_TYPE_AEAD) {
+ alg_name = sa_algs[i].alg.aead.base.cra_name;
+ crypto_unregister_aead(&sa_algs[i].alg.aead);
+ } else {
+ alg_name = sa_algs[i].alg.crypto.cra_name;
+ err = crypto_unregister_alg(&sa_algs[i].alg.crypto);
+ }
+
+ sa_algs[i].registered = 0;
+ }
+}
+
+static int sa_init_mem(struct sa_crypto_data *dev_data)
+{
+ struct device *dev = &dev_data->pdev->dev;
+ /* Setup dma pool for security context buffers */
+ dev_data->sc_pool = dma_pool_create("keystone-sc", dev,
+ SA_CTX_MAX_SZ, 64, 0);
+ if (!dev_data->sc_pool) {
+ dev_err(dev, "Failed to create dma pool");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int sa_dma_init(struct sa_crypto_data *dd)
+{
+ int ret;
+ struct dma_slave_config cfg;
+
+ dd->dma_rx1 = NULL;
+ dd->dma_tx = NULL;
+ dd->dma_rx2 = NULL;
+
+ ret = dma_coerce_mask_and_coherent(dd->dev, DMA_BIT_MASK(48));
+ if (ret)
+ return ret;
+
+ dd->dma_rx1 = dma_request_chan(dd->dev, "rx1");
+ if (IS_ERR(dd->dma_rx1)) {
+ if (PTR_ERR(dd->dma_rx1) != -EPROBE_DEFER)
+ dev_err(dd->dev, "Unable to request rx1 DMA channel\n");
+ return PTR_ERR(dd->dma_rx1);
+ }
+
+ dd->dma_rx2 = dma_request_chan(dd->dev, "rx2");
+ if (IS_ERR(dd->dma_rx2)) {
+ dma_release_channel(dd->dma_rx1);
+ if (PTR_ERR(dd->dma_rx1) != -EPROBE_DEFER)
+ dev_err(dd->dev, "Unable to request rx2 DMA channel\n");
+ return PTR_ERR(dd->dma_rx2);
+ }
+
+ dd->dma_tx = dma_request_chan(dd->dev, "tx");
+ if (IS_ERR(dd->dma_tx)) {
+ if (PTR_ERR(dd->dma_rx1) != -EPROBE_DEFER)
+ dev_err(dd->dev, "Unable to request tx DMA channel\n");
+ ret = PTR_ERR(dd->dma_tx);
+ goto err_dma_tx;
+ }
+
+ memzero_explicit(&cfg, sizeof(cfg));
+
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = 4;
+ cfg.dst_maxburst = 4;
+
+ ret = dmaengine_slave_config(dd->dma_rx1, &cfg);
+ if (ret) {
+ dev_err(dd->dev, "can't configure IN dmaengine slave: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = dmaengine_slave_config(dd->dma_rx2, &cfg);
+ if (ret) {
+ dev_err(dd->dev, "can't configure IN dmaengine slave: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = dmaengine_slave_config(dd->dma_tx, &cfg);
+ if (ret) {
+ dev_err(dd->dev, "can't configure OUT dmaengine slave: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+
+err_dma_tx:
+ dma_release_channel(dd->dma_rx1);
+ dma_release_channel(dd->dma_rx2);
+
+ return ret;
+}
+
+static int sa_ul_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ static void __iomem *saul_base;
+ struct sa_crypto_data *dev_data;
+ u32 val;
+ int ret;
+
+ dev_data = devm_kzalloc(dev, sizeof(*dev_data), GFP_KERNEL);
+ if (!dev_data)
+ return -ENOMEM;
+
+ sa_k3_dev = dev;
+ dev_data->dev = dev;
+ dev_data->pdev = pdev;
+ platform_set_drvdata(pdev, dev_data);
+ dev_set_drvdata(sa_k3_dev, dev_data);
+
+ sa_init_mem(dev_data);
+ ret = sa_dma_init(dev_data);
+ if (ret)
+ return ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ saul_base = devm_ioremap_resource(dev, res);
+
+ val = SA_EEC_ENCSS_EN | SA_EEC_AUTHSS_EN | SA_EEC_CTXCACH_EN |
+ SA_EEC_CPPI_PORT_IN_EN | SA_EEC_CPPI_PORT_OUT_EN | SA_EEC_TRNG_EN;
+
+ writel_relaxed(val, saul_base + SA_ENGINE_ENABLE_CONTROL);
+
+ sa_register_algos(dev);
+
+ return 0;
+}
+
+static int sa_ul_remove(struct platform_device *pdev)
+{
+ struct sa_crypto_data *dev_data = platform_get_drvdata(pdev);
+
+ sa_unregister_algos(&pdev->dev);
+
+ dma_release_channel(dev_data->dma_rx2);
+ dma_release_channel(dev_data->dma_rx1);
+ dma_release_channel(dev_data->dma_tx);
+
+ dma_pool_destroy(dev_data->sc_pool);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id of_match[] = {
+ {.compatible = "ti,sa2ul-crypto",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_match);
+
+static struct platform_driver sa_ul_driver = {
+ .probe = sa_ul_probe,
+ .remove = sa_ul_remove,
+ .driver = {
+ .name = "saul-crypto",
+ .of_match_table = of_match,
+ },
+};
+module_platform_driver(sa_ul_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/crypto/sa2ul.h b/drivers/crypto/sa2ul.h
new file mode 100644
index 000000000000..caf3c88dcf2b
--- /dev/null
+++ b/drivers/crypto/sa2ul.h
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM6 SA2UL crypto accelerator driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Keerthy
+ * Vitaly Andrianov
+ */
+
+#ifndef _K3_SA2UL_
+#define _K3_SA2UL_
+
+#include <linux/interrupt.h>
+#include <linux/skbuff.h>
+#include <linux/hw_random.h>
+#include <crypto/aes.h>
+
+#define SA_ENGINE_ENABLE_CONTROL 0x1000
+
+struct sa_tfm_ctx;
+/*
+ * SA_ENGINE_ENABLE_CONTROL register bits
+ */
+#define SA_EEC_ENCSS_EN 0x00000001
+#define SA_EEC_AUTHSS_EN 0x00000002
+#define SA_EEC_TRNG_EN 0x00000008
+#define SA_EEC_PKA_EN 0x00000010
+#define SA_EEC_CTXCACH_EN 0x00000080
+#define SA_EEC_CPPI_PORT_IN_EN 0x00000200
+#define SA_EEC_CPPI_PORT_OUT_EN 0x00000800
+
+/*
+ * Encoding used to identify the typo of crypto operation
+ * performed on the packet when the packet is returned
+ * by SA
+ */
+#define SA_REQ_SUBTYPE_ENC 0x0001
+#define SA_REQ_SUBTYPE_DEC 0x0002
+#define SA_REQ_SUBTYPE_SHIFT 16
+#define SA_REQ_SUBTYPE_MASK 0xffff
+
+/* Number of 32 bit words in EPIB */
+#define SA_DMA_NUM_EPIB_WORDS 4
+
+/* Number of 32 bit words in PS data */
+#define SA_DMA_NUM_PS_WORDS 16
+#define NKEY_SZ 3
+#define MCI_SZ 27
+
+/*
+ * Maximum number of simultaeneous security contexts
+ * supported by the driver
+ */
+#define SA_MAX_NUM_CTX 512
+
+/*
+ * Assumption: CTX size is multiple of 32
+ */
+#define SA_CTX_SIZE_TO_DMA_SIZE(ctx_sz) \
+ ((ctx_sz) ? ((ctx_sz) / 32 - 1) : 0)
+
+#define SA_CTX_ENC_KEY_OFFSET 32
+#define SA_CTX_ENC_AUX1_OFFSET 64
+#define SA_CTX_ENC_AUX2_OFFSET 96
+#define SA_CTX_ENC_AUX3_OFFSET 112
+#define SA_CTX_ENC_AUX4_OFFSET 128
+
+/* Next Engine Select code in CP_ACE */
+#define SA_ENG_ID_EM1 2 /* Enc/Dec engine with AES/DEC core */
+#define SA_ENG_ID_EM2 3 /* Encryption/Decryption enginefor pass 2 */
+#define SA_ENG_ID_AM1 4 /* Auth. engine with SHA1/MD5/SHA2 core */
+#define SA_ENG_ID_AM2 5 /* Authentication engine for pass 2 */
+#define SA_ENG_ID_OUTPORT2 20 /* Egress module 2 */
+#define SA_ENG_ID_NONE 0xff
+
+/*
+ * Command Label Definitions
+ */
+#define SA_CMDL_OFFSET_NESC 0 /* Next Engine Select Code */
+#define SA_CMDL_OFFSET_LABEL_LEN 1 /* Engine Command Label Length */
+/* 16-bit Length of Data to be processed */
+#define SA_CMDL_OFFSET_DATA_LEN 2
+#define SA_CMDL_OFFSET_DATA_OFFSET 4 /* Stat Data Offset */
+#define SA_CMDL_OFFSET_OPTION_CTRL1 5 /* Option Control Byte 1 */
+#define SA_CMDL_OFFSET_OPTION_CTRL2 6 /* Option Control Byte 2 */
+#define SA_CMDL_OFFSET_OPTION_CTRL3 7 /* Option Control Byte 3 */
+#define SA_CMDL_OFFSET_OPTION_BYTE 8
+
+#define SA_CMDL_HEADER_SIZE_BYTES 8
+
+#define SA_CMDL_OPTION_BYTES_MAX_SIZE 72
+#define SA_CMDL_MAX_SIZE_BYTES (SA_CMDL_HEADER_SIZE_BYTES + \
+ SA_CMDL_OPTION_BYTES_MAX_SIZE)
+
+/* SWINFO word-0 flags */
+#define SA_SW_INFO_FLAG_EVICT 0x0001
+#define SA_SW_INFO_FLAG_TEAR 0x0002
+#define SA_SW_INFO_FLAG_NOPD 0x0004
+
+/*
+ * This type represents the various packet types to be processed
+ * by the PHP engine in SA.
+ * It is used to identify the corresponding PHP processing function.
+ */
+#define SA_CTX_PE_PKT_TYPE_3GPP_AIR 0 /* 3GPP Air Cipher */
+#define SA_CTX_PE_PKT_TYPE_SRTP 1 /* SRTP */
+#define SA_CTX_PE_PKT_TYPE_IPSEC_AH 2 /* IPSec Authentication Header */
+/* IPSec Encapsulating Security Payload */
+#define SA_CTX_PE_PKT_TYPE_IPSEC_ESP 3
+/* Indicates that it is in data mode, It may not be used by PHP */
+#define SA_CTX_PE_PKT_TYPE_NONE 4
+#define SA_CTX_ENC_TYPE1_SZ 64 /* Encryption SC with Key only */
+#define SA_CTX_ENC_TYPE2_SZ 96 /* Encryption SC with Key and Aux1 */
+
+#define SA_CTX_AUTH_TYPE1_SZ 64 /* Auth SC with Key only */
+#define SA_CTX_AUTH_TYPE2_SZ 96 /* Auth SC with Key and Aux1 */
+/* Size of security context for PHP engine */
+#define SA_CTX_PHP_PE_CTX_SZ 64
+
+#define SA_CTX_MAX_SZ (64 + SA_CTX_ENC_TYPE2_SZ + SA_CTX_AUTH_TYPE2_SZ)
+
+/*
+ * Encoding of F/E control in SCCTL
+ * Bit 0-1: Fetch PHP Bytes
+ * Bit 2-3: Fetch Encryption/Air Ciphering Bytes
+ * Bit 4-5: Fetch Authentication Bytes or Encr pass 2
+ * Bit 6-7: Evict PHP Bytes
+ *
+ * where 00 = 0 bytes
+ * 01 = 64 bytes
+ * 10 = 96 bytes
+ * 11 = 128 bytes
+ */
+#define SA_CTX_DMA_SIZE_0 0
+#define SA_CTX_DMA_SIZE_64 1
+#define SA_CTX_DMA_SIZE_96 2
+#define SA_CTX_DMA_SIZE_128 3
+
+/*
+ * Byte offset of the owner word in SCCTL
+ * in the security context
+ */
+#define SA_CTX_SCCTL_OWNER_OFFSET 0
+
+#define SA_CTX_ENC_KEY_OFFSET 32
+#define SA_CTX_ENC_AUX1_OFFSET 64
+#define SA_CTX_ENC_AUX2_OFFSET 96
+#define SA_CTX_ENC_AUX3_OFFSET 112
+#define SA_CTX_ENC_AUX4_OFFSET 128
+
+#define SA_SCCTL_FE_AUTH_ENC 0x65
+#define SA_SCCTL_FE_ENC 0x8D
+
+#define SA_ALIGN_MASK (sizeof(u32) - 1)
+#define SA_ALIGNED __aligned(32)
+
+/**
+ * struct sa_crypto_data - Crypto driver instance data
+ * @pdev: Platform device pointer
+ * @sc_pool: security context pool
+ * @dev: Device pointer
+ * @scid_lock: secure context ID lock
+ * @sc_id_start: starting index for SC ID
+ * @sc_id_end: Ending index for SC ID
+ * @sc_id: Security Context ID
+ * @ctx_bm: Bitmap to keep track of Security context ID's
+ * @ctx: SA tfm context pointer
+ * @dma_rx1: Pointer to DMA rx channel for sizes < 256 Bytes
+ * @dma_rx2: Pointer to DMA rx channel for sizes > 256 Bytes
+ * @dma_tx: Pointer to DMA TX channel
+ */
+struct sa_crypto_data {
+ struct platform_device *pdev;
+ struct dma_pool *sc_pool;
+ struct device *dev;
+ spinlock_t scid_lock; /* lock for SC-ID allocation */
+ /* Security context data */
+ u16 sc_id_start;
+ u16 sc_id_end;
+ u16 sc_id;
+ unsigned long ctx_bm[DIV_ROUND_UP(SA_MAX_NUM_CTX,
+ BITS_PER_LONG)];
+ struct sa_tfm_ctx *ctx;
+ struct dma_chan *dma_rx1;
+ struct dma_chan *dma_rx2;
+ struct dma_chan *dma_tx;
+};
+
+/**
+ * struct sa_cmdl_param_info: Command label parameters info
+ * @index: Index of the parameter in the command label format
+ * @offset: the offset of the parameter
+ * @size: Size of the parameter
+ */
+struct sa_cmdl_param_info {
+ u16 index;
+ u16 offset;
+ u16 size;
+};
+
+/* Maximum length of Auxiliary data in 32bit words */
+#define SA_MAX_AUX_DATA_WORDS 8
+
+/**
+ * struct sa_cmdl_upd_info: Command label updation info
+ * @flags: flags in command label
+ * @submode: Encryption submodes
+ * @enc_size: Size of first pass encryption size
+ * @enc_size2: Size of second pass encryption size
+ * @enc_offset: Encryption payload offset in the packet
+ * @enc_iv: Encryption initialization vector for pass2
+ * @enc_iv2: Encryption initialization vector for pass2
+ * @aad: Associated data
+ * @payload: Payload info
+ * @auth_size: Authentication size for pass 1
+ * @auth_size2: Authentication size for pass 2
+ * @auth_offset: Authentication payload offset
+ * @auth_iv: Authentication initialization vector
+ * @aux_key_info: Authentication aux key information
+ * @aux_key: Aux key for authentication
+ */
+struct sa_cmdl_upd_info {
+ u16 flags;
+ u16 submode;
+ struct sa_cmdl_param_info enc_size;
+ struct sa_cmdl_param_info enc_size2;
+ struct sa_cmdl_param_info enc_offset;
+ struct sa_cmdl_param_info enc_iv;
+ struct sa_cmdl_param_info enc_iv2;
+ struct sa_cmdl_param_info aad;
+ struct sa_cmdl_param_info payload;
+ struct sa_cmdl_param_info auth_size;
+ struct sa_cmdl_param_info auth_size2;
+ struct sa_cmdl_param_info auth_offset;
+ struct sa_cmdl_param_info auth_iv;
+ struct sa_cmdl_param_info aux_key_info;
+ u32 aux_key[SA_MAX_AUX_DATA_WORDS];
+};
+
+/*
+ * Number of 32bit words appended after the command label
+ * in PSDATA to identify the crypto request context.
+ * word-0: Request type
+ * word-1: pointer to request
+ */
+#define SA_PSDATA_CTX_WORDS 4
+
+/* Maximum size of Command label in 32 words */
+#define SA_MAX_CMDL_WORDS (SA_DMA_NUM_PS_WORDS - SA_PSDATA_CTX_WORDS)
+
+/**
+ * struct sa_ctx_info: SA context information
+ * @sc: Pointer to security context
+ * @sc_phys: Security context physical address that is passed on to SA2UL
+ * @cmdl_size: Command label size
+ * @cmdl: Command label for a particular iteration
+ * @cmdl_upd_info: structure holding command label updation info
+ * @epib: Extended protocol information block words
+ */
+struct sa_ctx_info {
+ u8 *sc;
+ dma_addr_t sc_phys;
+ u16 sc_id;
+ u16 cmdl_size;
+ u32 cmdl[SA_MAX_CMDL_WORDS];
+ struct sa_cmdl_upd_info cmdl_upd_info;
+ /* Store Auxiliary data such as K2/K3 subkeys in AES-XCBC */
+ u32 epib[SA_DMA_NUM_EPIB_WORDS];
+};
+
+struct sa_sham_hmac_ctx {
+ struct crypto_shash *shash;
+ u8 ipad[SHA512_BLOCK_SIZE] SA_ALIGNED;
+ u8 opad[SHA512_BLOCK_SIZE] SA_ALIGNED;
+};
+
+/**
+ * struct sa_tfm_ctx: TFM context structure
+ * @dev_data: struct sa_crypto_data pointer
+ * @enc: struct sa_ctx_info for encryption
+ * @dec: struct sa_ctx_info for decryption
+ * @auth: struct sa_ctx_info for authentication
+ * @keylen: encrption/decryption keylength
+ * @key: encryption key
+ * @shash: software hash crypto_hash
+ * @authkey: authentication key
+ */
+struct sa_tfm_ctx {
+ struct sa_crypto_data *dev_data;
+ struct sa_ctx_info enc;
+ struct sa_ctx_info dec;
+ struct sa_ctx_info auth;
+ int keylen;
+ u32 key[AES_KEYSIZE_256 / sizeof(u32)];
+ struct sa_sham_hmac_ctx base[0];
+ struct crypto_shash *shash;
+ u8 authkey[SHA512_BLOCK_SIZE];
+};
+
+/**
+ * struct sa_dma_req_ctx: Structure used for tx dma request
+ * @dev_data: struct sa_crypto_data pointer
+ * @cmdl: Complete command label with psdata and epib included
+ * @src: source payload scatterlist pointer
+ * @src_nents: Number of nodes in source scatterlist
+ * @pkt: packet dma
+ */
+struct sa_dma_req_ctx {
+ struct sa_crypto_data *dev_data;
+ u32 cmdl[SA_MAX_CMDL_WORDS + SA_PSDATA_CTX_WORDS];
+ struct scatterlist *src;
+ unsigned int src_nents;
+ bool pkt;
+};
+
+enum sa_submode {
+ SA_MODE_GEN = 0,
+ SA_MODE_CCM,
+ SA_MODE_GCM,
+ SA_MODE_GMAC
+};
+
+/* Encryption algorithms */
+enum sa_ealg_id {
+ SA_EALG_ID_NONE = 0, /* No encryption */
+ SA_EALG_ID_NULL, /* NULL encryption */
+ SA_EALG_ID_AES_CTR, /* AES Counter mode */
+ SA_EALG_ID_AES_F8, /* AES F8 mode */
+ SA_EALG_ID_AES_CBC, /* AES CBC mode */
+ SA_EALG_ID_DES_CBC, /* DES CBC mode */
+ SA_EALG_ID_3DES_CBC, /* 3DES CBC mode */
+ SA_EALG_ID_CCM, /* Counter with CBC-MAC mode */
+ SA_EALG_ID_GCM, /* Galois Counter mode */
+ SA_EALG_ID_AES_ECB,
+ SA_EALG_ID_LAST
+};
+
+/* Authentication algorithms */
+enum sa_aalg_id {
+ SA_AALG_ID_NONE = 0, /* No Authentication */
+ SA_AALG_ID_NULL = SA_EALG_ID_LAST, /* NULL Authentication */
+ SA_AALG_ID_MD5, /* MD5 mode */
+ SA_AALG_ID_SHA1, /* SHA1 mode */
+ SA_AALG_ID_SHA2_224, /* 224-bit SHA2 mode */
+ SA_AALG_ID_SHA2_256, /* 256-bit SHA2 mode */
+ SA_AALG_ID_HMAC_MD5, /* HMAC with MD5 mode */
+ SA_AALG_ID_HMAC_SHA1, /* HMAC with SHA1 mode */
+ SA_AALG_ID_HMAC_SHA2_224, /* HMAC with 224-bit SHA2 mode */
+ SA_AALG_ID_HMAC_SHA2_256, /* HMAC with 256-bit SHA2 mode */
+ SA_AALG_ID_GMAC, /* Galois Message Auth. Code mode */
+ SA_AALG_ID_CMAC, /* Cipher-based Mes. Auth. Code mode */
+ SA_AALG_ID_CBC_MAC, /* Cipher Block Chaining */
+ SA_AALG_ID_AES_XCBC /* AES Extended Cipher Block Chaining */
+};
+
+/*
+ * Mode control engine algorithms used to index the
+ * mode control instruction tables
+ */
+enum sa_eng_algo_id {
+ SA_ENG_ALGO_ECB = 0,
+ SA_ENG_ALGO_CBC,
+ SA_ENG_ALGO_CFB,
+ SA_ENG_ALGO_OFB,
+ SA_ENG_ALGO_CTR,
+ SA_ENG_ALGO_F8,
+ SA_ENG_ALGO_F8F9,
+ SA_ENG_ALGO_GCM,
+ SA_ENG_ALGO_GMAC,
+ SA_ENG_ALGO_CCM,
+ SA_ENG_ALGO_CMAC,
+ SA_ENG_ALGO_CBCMAC,
+ SA_NUM_ENG_ALGOS
+};
+
+struct sa_eng_info {
+ u8 eng_id;
+ u16 sc_size;
+};
+
+extern struct device *sa_ks2_dev;
+
+#endif /* _K3_SA2UL_ */
--
2.17.1
\
 
 \ /
  Last update: 2019-06-28 06:28    [W:0.170 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site