lkml.org 
[lkml]   [2019]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] fbtft: Cleanup line over 80 character warnings
On Thu, Jun 27, 2019 at 02:12:40PM +0200, Lukas Schneider wrote:
> Cleanup the line over 80 character warnings, reported by checkpatch
>
> Signed-off-by: Lukas Schneider <lukas.s.schneider@fau.de>
> Signed-off-by: Jannik Moritz <jannik.moritz@fau.de>
> Cc: <linux-kernel@i4.cs.fau.de>
> ---
> drivers/staging/fbtft/fbtft-sysfs.c | 3 ++-
> drivers/staging/fbtft/fbtft.h | 26 ++++++++++++++++++++++----
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/fbtft/fbtft-sysfs.c b/drivers/staging/fbtft/fbtft-sysfs.c
> index 2a5c630dab87..78d2b81ea2e7 100644
> --- a/drivers/staging/fbtft/fbtft-sysfs.c
> +++ b/drivers/staging/fbtft/fbtft-sysfs.c
> @@ -68,7 +68,8 @@ int fbtft_gamma_parse_str(struct fbtft_par *par, u32 *curves,
> ret = get_next_ulong(&curve_p, &val, " ", 16);
> if (ret)
> goto out;
> - curves[curve_counter * par->gamma.num_values + value_counter] = val;
> + curves[curve_counter * par->gamma.num_values
> + + value_counter] = val;

Ick, that's horrible to read now, right?

> value_counter++;
> }
> if (value_counter != par->gamma.num_values) {
> diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h
> index 9b6bdb62093d..cddbfd4ffa10 100644
> --- a/drivers/staging/fbtft/fbtft.h
> +++ b/drivers/staging/fbtft/fbtft.h
> @@ -348,9 +348,25 @@ module_exit(fbtft_driver_module_exit);
>
> /* shorthand debug levels */
> #define DEBUG_LEVEL_1 DEBUG_REQUEST_GPIOS
> -#define DEBUG_LEVEL_2 (DEBUG_LEVEL_1 | DEBUG_DRIVER_INIT_FUNCTIONS | DEBUG_TIME_FIRST_UPDATE)
> -#define DEBUG_LEVEL_3 (DEBUG_LEVEL_2 | DEBUG_RESET | DEBUG_INIT_DISPLAY | DEBUG_BLANK | DEBUG_REQUEST_GPIOS | DEBUG_FREE_GPIOS | DEBUG_VERIFY_GPIOS | DEBUG_BACKLIGHT | DEBUG_SYSFS)
> -#define DEBUG_LEVEL_4 (DEBUG_LEVEL_2 | DEBUG_FB_READ | DEBUG_FB_WRITE | DEBUG_FB_FILLRECT | DEBUG_FB_COPYAREA | DEBUG_FB_IMAGEBLIT | DEBUG_FB_BLANK)
> +#define DEBUG_LEVEL_2 (DEBUG_LEVEL_1 | \
> + DEBUG_DRIVER_INIT_FUNCTIONS | \
> + DEBUG_TIME_FIRST_UPDATE)
> +#define DEBUG_LEVEL_3 (DEBUG_LEVEL_2 | \
> + DEBUG_RESET | \
> + DEBUG_INIT_DISPLAY | \
> + DEBUG_BLANK | \
> + DEBUG_REQUEST_GPIOS | \
> + DEBUG_FREE_GPIOS | \
> + DEBUG_VERIFY_GPIOS | \
> + DEBUG_BACKLIGHT | \
> + DEBUG_SYSFS)
> +#define DEBUG_LEVEL_4 (DEBUG_LEVEL_2 | \
> + DEBUG_FB_READ | \
> + DEBUG_FB_WRITE | \
> + DEBUG_FB_FILLRECT | \
> + DEBUG_FB_COPYAREA | \
> + DEBUG_FB_IMAGEBLIT | \
> + DEBUG_FB_BLANK)
> #define DEBUG_LEVEL_5 (DEBUG_LEVEL_3 | DEBUG_UPDATE_DISPLAY)
> #define DEBUG_LEVEL_6 (DEBUG_LEVEL_4 | DEBUG_LEVEL_5)
> #define DEBUG_LEVEL_7 0xFFFFFFFF

All of these special debug "levels" need to go away now that the drivers
are working, and just use the in-kernel debugging macros instead.

thanks,

greg k-h

\
 
 \ /
  Last update: 2019-06-27 18:44    [W:0.038 / U:1.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site