lkml.org 
[lkml]   [2019]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND V2 2/3] clocksource: imx-sysctr: Make timer work with clock driver using platform driver model
From
Date
On 23/06/2019 14:38, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
>
> On some i.MX8M platforms, clock driver uses platform driver
> model and it is NOT ready during timer initialization phase,
> the clock operations will fail and system counter driver will
> fail too. As all the i.MX8M platforms' system counter clock
> are from OSC which is always enabled, so it is no need to enable
> clock for system counter driver, the ONLY thing is to pass
> clock frequence to driver.
>
> To make system counter driver work for upper scenario, add an
> option of skipping of_clk operation for system counter driver,
> an optional property "clock-frequency" is introduced to pass
> the frequency value to system counter driver and indicate driver
> to skip of_clk operations.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> - improve commit log, no content change.
> ---
> drivers/clocksource/timer-imx-sysctr.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
> index fd7d680..8ff3d7e 100644
> --- a/drivers/clocksource/timer-imx-sysctr.c
> +++ b/drivers/clocksource/timer-imx-sysctr.c
> @@ -129,6 +129,14 @@ static void __init sysctr_clockevent_init(void)
> static int __init sysctr_timer_init(struct device_node *np)
> {
> int ret = 0;
> + u32 rate;
> +
> + if (!of_property_read_u32(np, "clock-frequency",
> + &rate)) {
> + to_sysctr.of_clk.rate = rate;
> + to_sysctr.of_clk.period = DIV_ROUND_UP(rate, HZ);
> + to_sysctr.flags &= ~TIMER_OF_CLOCK;
> + }

Please take the opportunity to add the TIMER_OF_CLOCK_FREQUENCY flag in
timer-of and the corresponding code above.

Then check the clock-frequency presence and add TIMER_OF_CLOCK or
TIMER_OF_CLOCK_FREQUENCY flag to the timer-of structure.

eg:

to_sysctr.flags |= of_find_property(np, "clock-frequency", NULL) ?
TIMER_OF_CLOCK_FREQUENCY : TIMER_OF_CLOCK;




> ret = timer_of_init(np, &to_sysctr);
> if (ret)
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-06-27 14:37    [W:0.179 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site