lkml.org 
[lkml]   [2019]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] i2c: designware: Add disable runtime pm quirk
From
Date
On 6/26/19 5:32 AM, AceLan Kao wrote:
> Adding I2C_HID_QUIRK_NO_RUNTIME_PM quirk doesn't help on this issue.
> Actually, Goodix touchpad already has that PM quirk in the list for other issue.
> { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_01F0,
> I2C_HID_QUIRK_NO_RUNTIME_PM },
> I also modify the code as you suggested, but no luck.
>
Yeah, I realized it won't help as the i2c-hid device is anyway powered
on constantly when the device is open by the pm_runtime_get_sync() call
in i2c_hid_open().

> It's not Goodix takes time to wakeup, it's designware I2C controller.
> Designware doesn't do anything wrong here, it's Goodix set the interrupt timeout
> that leads to the issue, so we have to prevent designware from runtime
> suspended.
> But only on that bus where Goodix is connected and open by user space.
What I mean something like below:

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c
b/drivers/hid/i2c-hid/i2c-hid-core.c
index 90164fed08d3..bbeaa39ddc23 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -795,6 +795,9 @@ static int i2c_hid_open(struct hid_device *hid)
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret = 0;

+ /* some quirk test here */
+ pm_runtime_get_sync(&client->adapter->dev);
+
ret = pm_runtime_get_sync(&client->dev);
if (ret < 0)
return ret;
@@ -812,6 +815,9 @@ static void i2c_hid_close(struct hid_device *hid)

/* Save some power */
pm_runtime_put(&client->dev);
+
+ /* some quirk test here */
+ pm_runtime_put(&client->adapter->dev);
}

static int i2c_hid_power(struct hid_device *hid, int lvl)
--
Jarkko

\
 
 \ /
  Last update: 2019-06-26 08:28    [W:0.050 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site