lkml.org 
[lkml]   [2019]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Wed, 26 Jun 2019 11:51:12 +0000
Naga Sureshkumar Relli <nagasure@xilinx.com> wrote:

> Hi Boris,
>
> > -----Original Message-----
> > From: Boris Brezillon <boris.brezillon@collabora.com>
> > Sent: Wednesday, June 26, 2019 4:57 PM
> > To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> > Cc: miquel.raynal@bootlin.com; helmut.grohne@intenta.de; richard@nod.at;
> > dwmw2@infradead.org; computersforpeace@gmail.com; marek.vasut@gmail.com;
> > vigneshr@ti.com; bbrezillon@kernel.org; yamada.masahiro@socionext.com; linux-
> > mtd@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write
> > driver's read_page()/write_page()
> >
> > On Wed, 26 Jun 2019 11:22:33 +0000
> > Naga Sureshkumar Relli <nagasure@xilinx.com> wrote:
> >
> > > Hi Boris,
> > >
> > > > -----Original Message-----
> > > > From: Boris Brezillon <boris.brezillon@collabora.com>
> > > > Sent: Wednesday, June 26, 2019 12:18 PM
> > > > To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> > > > Cc: miquel.raynal@bootlin.com; helmut.grohne@intenta.de;
> > > > richard@nod.at; dwmw2@infradead.org; computersforpeace@gmail.com;
> > > > marek.vasut@gmail.com; vigneshr@ti.com; bbrezillon@kernel.org;
> > > > yamada.masahiro@socionext.com; linux- mtd@lists.infradead.org;
> > > > linux-kernel@vger.kernel.org
> > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not
> > > > over write driver's read_page()/write_page()
> > > >
> > > > On Mon, 24 Jun 2019 22:46:29 -0600
> > > > Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> wrote:
> > > >
> > > > > Add check before assigning chip->ecc.read_page() and
> > > > > chip->ecc.write_page()
> > > > >
> > > > > Signed-off-by: Naga Sureshkumar Relli
> > > > > <naga.sureshkumar.relli@xilinx.com>
> > > > > ---
> > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +++++--
> > > > > 1 file changed, 5 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c
> > > > > b/drivers/mtd/nand/raw/nand_micron.c
> > > > > index cbd4f09ac178..565f2696c747 100644
> > > > > --- a/drivers/mtd/nand/raw/nand_micron.c
> > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c
> > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip)
> > > > > chip->ecc.size = 512;
> > > > > chip->ecc.strength = chip->base.eccreq.strength;
> > > > > chip->ecc.algo = NAND_ECC_BCH;
> > > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
> > > > > - chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
> > > > > + if (!chip->ecc.read_page)
> > > > > + chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
> > > > > +
> > > > > + if (!chip->ecc.write_page)
> > > > > + chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
> > > >
> > > > That's wrong, if you don't want on-die ECC to be used, simply don't
> > > > set nand-ecc-mode to "on- die".
> > > Ok. But if we want to use on-die ECC then you mean to say it is mandatory to use
> > micron_nand_read/write_page_on_die_ecc()?
> >
> > Absolutely, and if it doesn't work that means you driver does not
> > implement raw accesses correctly, which means it's still buggy...
> I agree. But let's say, if there is a limitation with the controller. Then it is must to have this check right?
> I mean, for pl353 controller, we must clear the CS during the data phase, hence we are splitting the
> Transfer in the pl353_read/write_page_raw().
> + pl353_nand_read_data_op(chip, buf, mtd->writesize, false);
> + p = chip->oob_poi;
> + pl353_nand_read_data_op(chip, p,
> + (mtd->oobsize -
> + PL353_NAND_LAST_TRANSFER_LENGTH), false);
> + p += (mtd->oobsize - PL353_NAND_LAST_TRANSFER_LENGTH);
> + xnfc->dataphase_addrflags |= PL353_NAND_CLEAR_CS;
> + pl353_nand_read_data_op(chip, p, PL353_NAND_LAST_TRANSFER_LENGTH,
> + false);
> As the above sequence is needed even for raw access, PL353 is unable to use the on_die_page reads.

This "de-assert CS on last access" logic should be done in the
exec_op() implementation. I also wonder how that works for operations
that don't have data cycles. Oh, BTW, most chips are CE-don't-care,
which means you can assert/de-assert CS on each read_data_op() without
any issues.

\
 
 \ /
  Last update: 2019-06-26 14:05    [W:0.056 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site