lkml.org 
[lkml]   [2019]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 13/14] arm64: dts: qcom: qcs404: Add DVFS support
Perhaps I should look at the recipient list next time before posting :)

Kind regards,
Niklas

On Wed, 26 Jun 2019 at 11:08, Niklas Cassel <niklas.cassel@linaro.org> wrote:
>
> I actually think that it makes sense to squash this patch with the
> [PATCH v3 10/14] arm64: dts: qcom: qcs404: Add OPP table
> patch.
>
> But that might be a personal preference.
>
> Either way, I think this series in ready for the real mailing list.
>
>
>
>
> On Tue, 25 Jun 2019 at 18:48, Jorge Ramirez-Ortiz
> <jorge.ramirez-ortiz@linaro.org> wrote:
> >
> > Support dynamic voltage and frequency scaling on qcs404.
> >
> > Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
> > Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
> > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/qcs404.dtsi | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > index 9569686dbc41..4b4ce0b5df76 100644
> > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > @@ -34,6 +34,9 @@
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > next-level-cache = <&L2_0>;
> > + clocks = <&apcs_glb>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > + cpu-supply = <&pms405_s3>;
> > };
> >
> > CPU1: cpu@101 {
> > @@ -43,6 +46,9 @@
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > next-level-cache = <&L2_0>;
> > + clocks = <&apcs_glb>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > + cpu-supply = <&pms405_s3>;
> > };
> >
> > CPU2: cpu@102 {
> > @@ -52,6 +58,9 @@
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > next-level-cache = <&L2_0>;
> > + clocks = <&apcs_glb>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > + cpu-supply = <&pms405_s3>;
> > };
> >
> > CPU3: cpu@103 {
> > @@ -61,6 +70,9 @@
> > enable-method = "psci";
> > cpu-idle-states = <&CPU_SLEEP_0>;
> > next-level-cache = <&L2_0>;
> > + clocks = <&apcs_glb>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > + cpu-supply = <&pms405_s3>;
> > };
> >
> > L2_0: l2-cache {
> > --
> > 2.21.0
> >

\
 
 \ /
  Last update: 2019-06-26 11:11    [W:0.063 / U:5.060 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site