lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] drm/panel: jh057n0090: Add regulator support
Date
Allow to specify regulators for vcc and iovcc. According to the data
sheet the panel wants vcc (2.8V) and iovcc (1.8V) and there's no startup
dependency between the two.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
.../drm/panel/panel-rocktech-jh057n00900.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
index b8a069055fbc..f8f6f087b9bc 100644
--- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
@@ -15,6 +15,7 @@
#include <linux/gpio/consumer.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
+#include <linux/regulator/consumer.h>
#include <video/display_timing.h>
#include <video/mipi_display.h>

@@ -47,6 +48,8 @@ struct jh057n {
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct backlight_device *backlight;
+ struct regulator *vcc;
+ struct regulator *iovcc;
bool prepared;

struct dentry *debugfs;
@@ -160,6 +163,8 @@ static int jh057n_unprepare(struct drm_panel *panel)
return 0;

mipi_dsi_dcs_set_display_off(dsi);
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vcc);
ctx->prepared = false;

return 0;
@@ -174,6 +179,13 @@ static int jh057n_prepare(struct drm_panel *panel)
return 0;

DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ ret = regulator_enable(ctx->vcc);
+ if (ret < 0)
+ return ret;
+ ret = regulator_enable(ctx->iovcc);
+ if (ret < 0)
+ return ret;
+
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(20, 40);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
@@ -301,6 +313,13 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->backlight))
return PTR_ERR(ctx->backlight);

+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc))
+ return PTR_ERR(ctx->vcc);
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(ctx->iovcc))
+ return PTR_ERR(ctx->iovcc);
+
drm_panel_init(&ctx->panel);
ctx->panel.dev = dev;
ctx->panel.funcs = &jh057n_drm_funcs;
--
2.20.1
\
 
 \ /
  Last update: 2019-06-25 19:05    [W:0.070 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site