lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/12] backlight: gpio: pull the non-pdata device probing code into probe()
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There's no good reason to have the generic probing code in a separate
routine. This function is short and is inlined by the compiler anyway.
Move it into probe under the pdata-specific part.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/video/backlight/gpio_backlight.c | 39 ++++++++----------------
1 file changed, 13 insertions(+), 26 deletions(-)

diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index 8adbc8d75097..89e10bccfd3c 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -54,30 +54,6 @@ static const struct backlight_ops gpio_backlight_ops = {
.check_fb = gpio_backlight_check_fb,
};

-static int gpio_backlight_probe_prop(struct platform_device *pdev,
- struct gpio_backlight *gbl)
-{
- struct device *dev = &pdev->dev;
- enum gpiod_flags flags;
- int ret;
-
- gbl->def_value = device_property_read_bool(dev, "default-on");
- flags = gbl->def_value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
-
- gbl->gpiod = devm_gpiod_get(dev, NULL, flags);
- if (IS_ERR(gbl->gpiod)) {
- ret = PTR_ERR(gbl->gpiod);
-
- if (ret != -EPROBE_DEFER) {
- dev_err(dev,
- "Error: The gpios parameter is missing or invalid.\n");
- }
- return ret;
- }
-
- return 0;
-}
-
static int gpio_backlight_probe(struct platform_device *pdev)
{
struct gpio_backlight_platform_data *pdata =
@@ -86,6 +62,7 @@ static int gpio_backlight_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct backlight_device *bl;
struct gpio_backlight *gbl;
+ enum gpiod_flags flags;
int ret;

gbl = devm_kzalloc(dev, sizeof(*gbl), GFP_KERNEL);
@@ -116,9 +93,19 @@ static int gpio_backlight_probe(struct platform_device *pdev)
if (!gbl->gpiod)
return -EINVAL;
} else {
- ret = gpio_backlight_probe_prop(pdev, gbl);
- if (ret)
+ gbl->def_value = device_property_read_bool(dev, "default-on");
+ flags = gbl->def_value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+
+ gbl->gpiod = devm_gpiod_get(dev, NULL, flags);
+ if (IS_ERR(gbl->gpiod)) {
+ ret = PTR_ERR(gbl->gpiod);
+
+ if (ret != -EPROBE_DEFER) {
+ dev_err(dev,
+ "Error: The gpios parameter is missing or invalid.\n");
+ }
return ret;
+ }
}

memset(&props, 0, sizeof(props));
--
2.21.0
\
 
 \ /
  Last update: 2019-06-25 18:36    [W:0.200 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site