[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next] net: stmmac: Fix the case when PHY handle is not present
On Tue, Jun 25, 2019 at 11:40:00PM +0900, Katsuhiro Suzuki wrote:
> Hello Jose,
> This patch works fine with my Tinker Board. Thanks a lot!
> Tested-by: Katsuhiro Suzuki <>
> BTW, from network guys point of view, is it better to add a phy node
> into device trees that have no phy node such as the Tinker Board?

Hi Katsuhiro

It makes it less ambiguous if there is a phy-handle. It is then very
clear which PHY should be used. For a development board, which people
can be tinkering around with, there is a chance they add a second PHY
to the MDIO bus, or an Ethernet switch, etc. Without explicitly
listing the PHY, it might get the wrong one. However this is generally
a problem if phy_find_first() is used. I think in this case, something
is setting priv->plat->phy_addr, so it is also clearly defined which
PHY to use.


 \ /
  Last update: 2019-06-25 16:52    [W:0.063 / U:5.944 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site